Reviews
Exclusive shape is stunning, price is high
Although the complicated cut shape is unique to OEM, I think the texture of the matte itself is quite similar to that of OEM.
I wished the price was another 1,000 yen lower.
View detail
Fits: KAWASAKI Ninja 1000SX, KAWASAKI Ninja 1000 (Z1000SX)
Included Parts:Required
[How is it used? Required for Pannier case installation
Was the one you received as per Image? Yes
Was the installation difficult? No
How was your experience with it? I didn't think it would be this bad
[Included Parts:were they on? None
[Was there anything that disappointed you? comparatively high
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
GIVI Inner Mat
I installed the Inner Mat on my GIVI commuter scooter. I am satisfied with the size and quality of the mat. View detail
Purchase at the same time as Rear boxB32NB
[How is it used?
Cushion material of what was purchased at the same time as B32 and placed inside.
Motorcycle is used for commuting and touring.
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
The thickness is just right.
[Points to note]
Although it is Cut to shape with the bottom,
The bottom of the box floats a little on the circular projection.
This section was hollowed out with Cutter.
How did it compare to other products?
No comparison has been made since it is a dedicated product.
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
The bottom of the box floats a little when it hits the circular projection.
If this part is also Cut, it fits with Exactly.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RSCafe, KAWASAKI Z900RS Cafe
The Right Side is not available for vehicles equipped with OHLINS with a sub tank.
As per the Title, the Right Side is not attached to vehicles equipped with OHLINS because the sub tank is in the way.
Exhaust systems with silencers that are too long or too high up cannot be installed in the case of other brand products.
Grab Bar can't be used in conjunction with it either.
(Fender Eliminator Kit can be used together)
So, I have only the Left Side installed,
The Bracket is secured in three places to hold it in place.
The fitting manual is a picture, so please translate it (you don't have to type it here to understand it).
I originally intended to use the Left Side for tools, rain gear, Puncture Repair Kit, etc. that I always carry, so it would be fine if it only had a Left Side, but it would be a waste not to be able to use the Right Side.
Quantity:Pair (for Left and Right) I wonder if there could be a Rose sale setup.
View detail
Not applicable for the 2022 model year.
The 2022 model is not in the fitment, but I bought it and the only result is that it's not unusable, but it's not fit.
The 2018 and 2022 side covers should have the exact same shape, but I think the 18 year model will be too bulky to fit the side cover properly since it will be tucked under this side cover to begin with.
How about this for a fit, Mr. SHAD….
Well, you can't force it to fit and use the box.
I didn't like how bulky it was, so I cut the side cover where the M8Screw fastens with a cutter to make it less bulky, but this allowed rainwater to come in and I couldn't attach the cover above the cover, so there was a huge gap under the seat. I bought a separate side cover, but I'm wondering if I should re-drill the holes.
Also, is the shape of the cover that fits over the side cover wider between the '18 and '22 models?
I wonder if I should buy an '18 Cover since I can see the whole hole when I remove the Cover?
Incidentally, for some reason, the OEM Grab Bar that can be used on the '18 and later models is also not usable comfortably unless the Left Side is slightly hit by the Grab Bar and two Washers are bit into it.
The holes that are exposed can be plugged with the parts that come with the Grab Bar.
It is better to remove the OEM Grab Bar because it makes it even harder to fit the RearSeat with the OEM Grab Bar. I don't remove it that often, so it's just a matter of mood.
If I had to make a hole anyway, I wanted to find a more decent place to mount it.
I would recommend it to a friend, but if you want a Side box, you can put it on.
View detail
The part that should not be missing in the bag
It is strange that this part is fixed on the side bag itself.
The price is not very good, but I don't understand why they are selling this part, but if you want to eat a side bag, you must buy this.
It's perfect if you buy this and the key bundle.
Installation is not that difficult, but I hope you use bolt bond when tightening the bolts.
You can prevent the dropping phenomenon caused by vibration in advance. -------------------------------------------------- -------- It is strange that this boom is fixed in the side bag itself. The price is not so good, but I don't understand why I'm selling it. It is perfect to buy this with this. The mounting is not so difficult, but I hope you use the bolt bond when you tighten the bolt. Later, you can stop the missing phenomenon due to vibration. Powered by Google Translator
View detail
Poorly made so it floats.
The bolt and double-sided tape are used to secure the bolt, but the double-sided tape peeled off quickly due to poor workmanship. View detail
Fits: KAWASAKI Ninja 1000SX, KAWASAKI Ninja 1000 (Z1000SX)
What you need for Pannier case
This is necessary for the Pannier case, but it is sold separately and seems a bit expensive. View detail
Fits: KAWASAKI Ninja 1000SX, KAWASAKI Ninja 1000 (Z1000SX)
Required for Pannier installation
Essential items for OEMPannier case installation.
It is effective and does not require much work SuKill.
View detail
Everything its ok!
The pannier case guard ist perfect the NT1100 Honda motorbike. Very easy to use and assemble. Design its great. The product is very fast shipped to Hungary. Thank you very mutch! View detail
good product
Thank you for the fast delivery. I feel good that the correct parts are delivered. I'm glad it's an accurate part. Have a nice day! View detail
Sold separately...
Better to have it, I bought it for soundproofing. View detail
have (time, money, etc.) left over
It is fixed using a bolt and double-sided tape, but it floats even if primer is used, perhaps because of the sweetness of the molding. (^_^;)
It looks great, but...
View detail
thank you for fast delivery
Fitted precisely into the 2022 S1000GT side cases.
In Korea, you have to wait 2-3 months, but I couldn't use the side case, so I bought it directly ---------------------------------- ------------------------ 2022 S1000GT Side Case is accurately mounted. In Korea, I have to wait 2-3 months, but I couldn't use the side case. I really like it. Powered by Google Translator
View detail
Aluminium Trim Panels for my NC750X Panniers
Search the web for a reliable supplier. Found a Japanese source for my Japanese bike. What a perfect match. Read the reviews of Webike and started ordering my parts from the shop. Totally happy with the communication, delivery and products that I have received. Order the base carrier, support mounting brackets, pannier panels, panniers and keys set separately. All information was clearly shown on the website and I know what to expect when I got my items delivered to my home country Singapore. Delivery was via EMS and very efficiently delivered by my local post office. I ordered the panniers which come as plain black. It is very boring to have the panniers on my white NC750X in such a manner. I decided to order the aluminium trim panels A happy customer. View detail
Fits: KAWASAKI Ninja H2 SX SE, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SX SE+(ZX1002DKF), KAWASAKI Ninja H2 SX SE+, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SX SE
Easy
This is an absolutely necessary Parts when attaching SIDEPannier to H2sx.
It's easy to do
All you have to do is to put the seal and turn the screw, so if you have a tool and a screw lock (a strong one) and follow the instruction manual, anyone should be able to install it.
To be honest, I think 15,000 is a bit expensive for 2 pieces of iron and a seal… I hope it's at least 10,000!
View detail
Very SMART!
Anyway, with the side case removed, it is almost impossible to tell that SMART and Mounting Hardware is attached.
Since the side case can be attached with one-touch in this state, there is nothing to complain about.
I was not comfortable with the idea of wearing a side case to make things look more formal, but I'm glad I bought it.
View detail
Please purchase with Side caseSupportBracket
[How is it used?
Necessary when using Side case
Was the one you received as per Image?
Street Image
How was your experience with it?
Side case can be used without rattling
[Points to note]
Please use Rubber adhesive for Bracket installation.
[ITEMS TO BUY TOGETHER
Side caseSupportBracket
View detail
That's what I call an OEM Product! Perfect size!
GIVI GIVI:I bought Mono-lock case B32N here, and when I wrote that there was no rug in Impression of use, other people told me that it was OEM.
In fact, I made it by cutting a piece of Sponge rubberSeat that I had at home, but it was divided into two parts due to its large size, and it was overlapped with Gap by acceleration and Braking (I guess I should glue the two pieces together, but... sweat).
After all, it's better to have the dimensions exactly right so it doesn't move inside! I am satisfied.
I bought it because I wanted it to be included in the BOXBody and I had an extra Point, but I don't think it should cost about 1/4 of the price of the BOXBody.
View detail