- Home
- Product reviews
- Accessories
- Motorcycle Luggages
- Other Pannier Case Options / Repair Parts
- Not applicable for the 2022 model year.... (SHAD: 3P System Fitting Kit)
【SHAD】3P System Fitting Kit Review
Not applicable for the 2022 model year.
The 2022 model is not in the fitment, but I bought it and the only result is that it's not unusable, but it's not fit.
The 2018 and 2022 side covers should have the exact same shape, but I think the 18 year model will be too bulky to fit the side cover properly since it will be tucked under this side cover to begin with.
How about this for a fit, Mr. SHAD….
Well, you can't force it to fit and use the box.
I didn't like how bulky it was, so I cut the side cover where the M8Screw fastens with a cutter to make it less bulky, but this allowed rainwater to come in and I couldn't attach the cover above the cover, so there was a huge gap under the seat. I bought a separate side cover, but I'm wondering if I should re-drill the holes.
Also, is the shape of the cover that fits over the side cover wider between the '18 and '22 models?
I wonder if I should buy an '18 Cover since I can see the whole hole when I remove the Cover?
Incidentally, for some reason, the OEM Grab Bar that can be used on the '18 and later models is also not usable comfortably unless the Left Side is slightly hit by the Grab Bar and two Washers are bit into it.
The holes that are exposed can be plugged with the parts that come with the Grab Bar.
It is better to remove the OEM Grab Bar because it makes it even harder to fit the RearSeat with the OEM Grab Bar. I don't remove it that often, so it's just a matter of mood.
If I had to make a hole anyway, I wanted to find a more decent place to mount it.
I would recommend it to a friend, but if you want a Side box, you can put it on.
ไม่สามารถใช้ได้กับรุ่นปี 2022
รุ่นปี 2022 ไม่ได้อยู่ในอุปกรณ์เสริม แต่ฉันซื้อมาและผลลัพธ์เพียงอย่างเดียวคือใช้งานไม่ได้ แต่ก็ไม่พอดี
ฝาข้างปี 2018 และ 2022 ควรมีรูปร่างเหมือนกันเป๊ะๆ แต่ฉันคิดว่ารุ่นปี 18 จะใหญ่เกินไปที่จะใส่ฝาข้างได้พอดี เพราะตอนแรกจะซ่อนไว้ใต้ฝาข้างนี้
เป็นไงบ้างเพื่อความพอดี Mr. SHAD….
คุณไม่สามารถบังคับให้พอดีและใช้กล่อง
ฉันไม่ชอบที่มันเทอะทะ ดังนั้นฉันจึงตัดฝาด้านข้างที่ M8Screw ยึดด้วยคัตเตอร์เพื่อให้เทอะทะน้อยลง แต่นี่ทำให้น้ำฝนไหลเข้ามาได้และฉันไม่สามารถติดที่ครอบไว้ด้านบนได้ ดังนั้น เป็นช่องว่างขนาดใหญ่ใต้ที่นั่ง ฉันซื้อที่ปิดด้านข้างแยกต่างหาก แต่ฉันสงสัยว่าฉันควรเจาะรูใหม่หรือไม่
นอกจากนี้ รูปทรงของฝาครอบที่พอดีกับฝาครอบด้านข้างจะกว้างกว่าระหว่างรุ่น '18 และ '22 หรือไม่
ฉันสงสัยว่าฉันควรซื้อ Cover '18 หรือไม่ เนื่องจากฉันสามารถเห็นรูทั้งหมดเมื่อถอด Cover ออก
อนึ่ง ด้วยเหตุผลบางอย่าง ราวจับ OEM ที่สามารถใช้กับรุ่น '18 และรุ่นที่ใหม่กว่านั้นใช้งานไม่ได้อย่างสะดวกสบาย เว้นแต่ด้านซ้ายจะถูกกระแทกเล็กน้อยโดยราวจับและแหวนรองสองตัวถูกกัดเข้าไป
รูที่เปิดสามารถเสียบกับชิ้นส่วนที่มาพร้อมกับราวจับ
จะดีกว่าถ้าถอดราวจับของ OEM ออก เพราะจะทำให้ยากยิ่งขึ้นในการประกอบเบาะหลังกับราวจับของ OEM ฉันไม่ได้ถอดมันบ่อยขนาดนั้น มันเป็นเรื่องของอารมณ์
ถ้าฉันต้องเจาะรู ฉันต้องการหาสถานที่ที่เหมาะสมกว่านี้เพื่อติดตั้ง
จะแนะนำให้เพื่อนค่ะ แต่ถ้าอยากได้ Side box ก็ใส่ได้ค่ะ