Reviews
It's a hassle to search and ask for help! For those who want to
In the overhaul of SEROW225, I disassembled the upper waist, so I needed a whole set of Gasket.
I thought that OEM is the best in terms of quality, but if I accumulate a lot of intentions, it will cost a certain amount of gold, and there were some parts that I was not sure whether to change or not, so if I can replace all of them at this price, it is easy.
The quality of the product is absolutely fine. It is totally usable.
View detail
Gasket
Not yet used for SeasonOff View detail
No Color, comparable to OEM Product.
After a while after engine OH, oil seal on Generator side and seal on StatorMount started leaking, so I replaced them.
The OEM oil seals that started leaking have only been used for 6 years and 10,000 km since the last OH, and I've treated them with care, but it happens.
The thing itself could be installed without any problems and the leakage was contained.
At the time of purchase, it was much cheaper than OEM, not to mention cheaper than buying a UniversalOil seal, so I was worried.
Not only for OH, but also for normal use, the leakage will suddenly appear one day, and since it is easy to replace, we recommend Stock as a precaution.
View detail
I put it on as a spare.
External Fuel filter attached to ESTRELLA.
It has been immobile for a while, and you can often find a little bit of age-related deterioration in various parts of the car. 。
There does not appear to be any fuel seepage, especially in the Fuel Cock area, but there is no denying that the Fuel Cock has deteriorated over time.
The other day, I was worried about the rust in the fuel tank, and although I have removed rust to prevent impurities from entering Gasoline, I am not sure about it, so I will install an additional external type of fuel filter.
Fuel filter
A filter device used in automobiles to filter fine impurities contained in fuel.
It is used for the purpose of removing water, sand, and dust mixed in during refueling, etc., and maintaining sufficient fuel efficiency.
There seems to be a time for replacement, though not up to the air filter.
■ 50,000 km at Carburetor Vehicles
■Injection car with 100,000 km
■Diesel car with 50,000 km
is the standard.
Continued use of the filter past its replacement time will not only clog the fuel filter element and cause a lack of engine output, but will also cause the filter to lose its original function of capturing foreign matter and separating moisture.
[When the fuel filter clogs.
‥
Idling of ▲Engine is unstable.
Engine seems to stop when driving.
▲ Suddenly, Engine stopped spewing.
Failure to start = Engine will not start.
I haven't experienced the clogging of the Filter yet, but considering the distance and age, it should be replaced. 。
In my 90's ESTRELLA, the fuel filter is integrated with the fuel cock and inserted into the tank. That is not so bad, but I wanted to be sure.
I also added an external Type as a spare.
I chose KIJIMA's because it was inexpensive and I had used it before.
The deciding factor was the transparency, which makes it easy to see dirt.
Replacement procedure.
(1) Fuel Cock is turned off
↓
(2) To be sure, Gasoline in the carburetor should also be removed.
↓
(3) Interrupt the fuel filter between the rubber hose connecting the fuel cock and the carburetor.
It is wise to prepare Oil Resistant Hose separately because OEM Hose is not long enough.
↓
(4) Turn on Cook and apply Engine.
Operation check.
Fuel Cock flows by Engine pressure.
after replacement
No problems
They seem to be getting rid of the impurities for sure.
Durability...? I think Large is durable because it is inexpensive and will be replaced with a con stunt.
It is a good idea to have insurance on older Motorcycles.
Installation is also easy.
View detail
Regular headRepair Parts
Although the Mukawa Regular head has been discontinued for quite some time, it is helpful that Repair Parts are still available.
I think I can still extend the life of my Regular head. (Lol)
View detail
Used for MC19 CBR250R
Same standard as OEM, so no problems with installation or performance. View detail
It doesn't fit the '23 model.
It doesn't fit the '23 model.
The bottom came on, but the top doesn't fit the Size.
View detail
Fits: HONDA CB750C Custom, HONDA CB750F Super Sport, HONDA CB750K, HONDA CB750L, HONDA CB750SC Nighthawk
The image and the real thing are different.
The image and the actual product are completely different.
Because there is no number engraving and all four have exactly the same shape,
When I try to install the Carburetor, it does not go all the way in.
In addition, the Carburetor fell out of the Indicator when trying to fit it into the OEMAir cleaner, making it completely unusable.
View detail
Think in terms of replacement frequency, not Power
I don't think there is anyone who can perceive the increase in inhalation efficiency by 0.5ps at Peak with SEROW in the product description.
I'm more of a wash and reuse kind of guy, but it's a lot more work than I thought it would be.
According to the official procedure, wash with Cleaner→ wash with mild detergent→ dry for a day→ apply Oil→ wait 6 hours and when Oil settles, you can drive.
Almost two days if you follow it exactly? If I wash on Saturday morning, I won't make it in time for Touring on Sunday.
If you're the kind of person who changes filters once or twice a year, OEM replacement would be better.
I guess it's for people who want to go as fast as possible in an hour-long Race to change filters in a month, which is often run in Course.
View detail
Fits: BMW R1200GS, BMW R1200GS Adventure, BMW R1200R, BMW R1200RS, BMW R1200RT, BMW R1250GS, BMW R1250GS Adventure, BMW R1250R, BMW R1250RS, BMW R1250RT
It's a must for Oil replacement.
BMW is said to be a Motorcycle only for the rich, but I still want to put in my favorite Oil and keep the cost down.
The only thing I decided to ask Dealer for was the price, and the price is meta-fucking-high.
So I changed the Oil by myself!
Attachment, too!
This is essential in that case!
View detail
Required for Crank Case Cover
Hose holder is attached to Crankcase and is required when replacing KOSOCrank Case Cover. The other attachments are all gold and the same color, so 5 stars. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled)
I think the cosmetics are good.
OEM Camshaft Cover Plug is Material:Rubber, but in recent years, Kawasaki's Material:My confidence in Rubber products is declining (personal opinion), so I switched to Aluminum!
I was worried about the accuracy of the Gasket and parts, but when I assembled it, I was surprised at the accuracy of the parts.
I put a little bit of Toyota's Black liquid Gasket on it and assembled it.
No Oil leakage after that, so I guess it's good.
Of course Torque wrench is a must!
View detail
I think it is a high quality product.
Radiator core guard is necessary because it not only protects the radiator core from dust and stones, but also makes it difficult to see mud splashes by wiping it off.
I have purchased some Reasonable overseas products, but the quality was not commensurate with the price, and even after installation, I was concerned about the fixation method.
The Etching factory's products are of high quality and the fixing method is well thought out, so I was glad to have them because they are safe and look luxurious and satisfying.
View detail
Fits: DERBI Antochia Coppa Diablo, DERBI Olympia Savanah Start, DERBI Grand Prix 74, DERBI Sport variant jumbo, PEUGEOT fox, PIAGGIO Chao-P., TOMOS alpino, TOMOS Classic I, TOMOS Classic II, TOMOS Flexer Sport, TOMOS levirate, Vespa 100 Vintage, Vespa 125ET3, Vespa 125ET3 Vintage, Vespa 50s Vintage, Vespa PK125S, Vespa PK50SS, Vespa Vespa Car APE50VAN, YAMAHA MR80, DERBI FDS, GTS, RD-2
Low price! It's helpful for old car riders!
I recently acquired a 50 year old Van Van 75 and have spent a lot of time and money to make it look like a new car. Thankfully, the engine was in great shape, so I just put in air cleaner, cleaned the exhaust system, changed the mission oil, and didn't have to touch the engine or carburetor. I was surprised to see that the plug was tightened so much. When I finally took it off, I found a plug that looked like it was 10 years old.
I replaced it with this plug, and the engine sound seems to be much lighter. I also made a Vehicle Mounting Tool Set and installed it with the spare plug since I didn't have any tools to mount it on the car. All that was left was to put the spare Gasoline in the bag and install it.
It will soon be fully restored.
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z1000, KAWASAKI Ninja1000SX, KAWASAKI VERSYS 1000
Replacement is easy.
ninja1000 is a Quantity:Pair (for Left and Right) Remove the Upper Cowl of the BoltQuantity before Tank:Remove the 2pcs and lift it up to reveal the air cleaner box. Next, remove the screws around the box with a Phillips screwdriver and remove the lid to replace the air filter. This filter is just fit like the OEM one. View detail
I am satisfied with the limited
I am grateful to still be able to purchase this product as it is an older Motorcycle and parts are limited. View detail
Fits: HONDA CB1300SBSP, HONDA CB1300SB, HONDA CB1100RS, HONDA CB1100EX, HONDA CB1100, HONDA CB1300ST, HONDA CB1300 SFSP, HONDA CB1300 SF
After 20,000 km
Purchased due to idling failure after full power. I am looking forward to the next Touring, but have not driven it yet. View detail
Fits: HONDA CB1100R, HONDA STEED600, HONDA Gold Wing, HONDA VALKYRIE, HONDA CB1300P, HONDA VT250Z, HONDA V-TWIN MAGNA, HONDA VT250 SPADA, HONDA VT250F, HONDA XELVIS, HONDA VTZ250, HONDA Steed400, HONDA RVF400R, HONDA VF400F, HONDA VF400F INTEGRA, HONDA VFR400R, HONDA VFR400Z, HONDA Shadow VLX, HONDA Interceptor, HONDA MAGNA
It is a good product for Choi Custom.
OEM is Material:Plastic and cheap-looking, so I replaced it. Simply Material:The aluminum finish is not aluminum, but a satin-like high quality finish like titanium, so it feels massive for its weight and is very satisfying to look at.
It is Material that is the cautionary tale.:Since the cap is not plastic, it is safe not to touch the cap when the Engine is hot after a stop due to high thermal conductivity. Turn the cap after the engine has cooled down to a certain degree. You may get a slight burn.
OEM is Material:I understand that it is Plastic.
View detail
I'm very happy with it
Installation was very easy, took only 5 minutes. It looks simple, but I think it works well. There were other products available with finer grain, but I bought the OEM version and installed it myself. There is a little space at the four corners, but considering that it does not interfere with the air cooling effect, I think it is sufficient. View detail
Fits: HARLEY-DAVIDSON SPORTSTER 84 late-11, HARLEY-DAVIDSON SOFTAIL 84-99, HARLEY-DAVIDSON FXR, HARLEY-DAVIDSON FLT, HARLEY-DAVIDSON FLH, HARLEY-DAVIDSON SPORTSTER [SPORTSTER] Late 84-11, HARLEY-DAVIDSON SOFTAIL] 84-99
cheap
Anyway, cheap ?
Looks nice and normal.
View detail