Reviews
For Japanese Vehicle Inspection Correspondence?
I had heard from my father, a Motorcycle shop owner, that if the Edge of the Screen is on the car, it will not pass inspection. [Color] I purchased Smoke and it came on Exactly with Zero gravity products by simply adjusting the length. View detail
Consumables.
It is used for the sameManufacturer'sScreen.
I installed it for a car inspection and have been using it ever since because it looked surprisingly luxurious.
I bought it because after about 3 years, the Yellow tarnish became noticeable.
The lacing braid end bracket allows for a secure fit and has never come off at high speeds.
It is long enough to be used one more time, so I will keep it well.
View detail
for Race.
Purchased to meet Race regulations.
It can be cut to the required length with scissors for installation.
It may be roughly twice as long.
View detail
perfectly (suited)
It was perfect without cutting into front cowl. View detail
To make it a Japanese Vehicle Inspection Correspondence!
I installed the windshield of the Other Brand Product to make it a Japanese Vehicle Inspection Correspondence!
It passed the inspection without any problems.
View detail
Vehicle Inspection Measures
MRAScreen is installed, but the bracket of the braid fixation is lost (often). I had to replace the braid because it was deteriorated. It is very nice that you can sell it as a lacing braid set. View detail
Fit for curvature
The ZX-25R A-Tech Screen was left uncut, so I used it to make it look better.
I was worried about the fit because of the curved lines, but the Large was sturdy.
The clip that stops the end is Chromate plating, so if you don't rustproof it once in a while, the white rust will float.
It is better to crush it lightly with Pliers after fitting because the crimp is loose.
View detail
On the edge of the sharp Screen!
I bought this because the edges of the Screen can be sharp.
Recommended for those who cut Screen.
It is easy to install and comes with a gold clasp.
View detail
It looks better now
The braid was replaced as it got old and hardened and the color became dull. The look is still beautiful and two mall clips are also available on Quantity:It comes in a set and is easy to replace. View detail
It's a little bit of a surprise
I bought it directly 3 years ago without going through Webike (sorry)
I used it in conjunction with the new Screen
Softer, thicker and easier to handle than OEM, but as others have commented It's a bit distorted if you're not careful
Because it is rubber, I will continue to use it as a consumable item and try my best to wind it well It is
View detail
It makes me feel safe
I bought a used motorcycle screen that didn't have moldings and I thought it would be better to have them The OEM parts were discontinued I purchased and installed this product because I just found it
It was installed with no problem, but the Left Side of the clip that stops it from coming off was not a problem at any time It was missing and I looked for it, found it and put it back on, but it came off again and this time it was lost
It seems to be slipping downhill (The Right Side is nothing to it.) I don't know if the installation position is bad, or if the notch has widened
I bought and installed the anti-shell clip because OEM parts were still available, but when I'm not sure if it will be off
View detail
Japanese Vehicle Inspection Correspondence
Currently in use Zero gravity Screen
Since there is no mall at the tip, at the time of a car inspection A little ...
I bought it.
Previously, when using MRA made Screen
Was it a bad way of stopping, Bracket stopping the tip of the mall
I flew away.
View detail
As expected it is no problem with other companies' Screen
I bought it for an automobile inspection
Screen is a pouch, but it was able to be used without problem by fitting cleanly
I do not think it looks bad so I will keep it as it is
View detail
The price is expensive, but ...
Since the vehicle inspection is also near, I bought it.
I chose smoke color as smoke screen.
It is more natural than Homsen's Mall, but it will fit nicely.
That's a high eye, but I firmly install it, Curve can not do Wrinkle and colors match well
I think that it will be attached as it is after the vehicle inspection.
View detail
It is easy to install
If it is Motorcycle with a car inspection it will not go through the vehicle inspection unless the horn of Screen is round, but the Screen of Touring SEROW stands firmly at the corner.
Since I do not want to cut the neck at any chance, I installed Windscreen Mole.
Length is also perfect as A little little extra.
View detail
Do not get hurt at the screen border
I installed it in the Scing of Touring SEROW.
It can be installed securely, Length is also 1. It is about 2 cm extra..
It is great if it is a little cheaper but
View detail
[Webike Monitor] Since there was nothing about the Screen purchased in the medieval times, it purchased. The color was attached to the Bubble Screen with the Smoke. r thinks that it will tend to do work at キツイ and the slight time if a cut is
[Webike Monitor] Since there was nothing about the Screen purchased in the
medieval times, it purchased.
The
color was attached to the Bubble Screen with the Smoke.
r thinks that it will tend to do work at キツイ and the slight time if a cut is made.
Although the Clip only for
is also attached, it may be said that double-stick tape is also used depending on the form of a Screen.
Although the
Manual was an English notation, there was no problem in particular in attachment.
Although I think that it is general-purpose and unavoidable, it remains very well.
What was necessary was to lengthen to a slight degree and for the 2 times part grade just to have been able to use, since it was
consumable goods.
It is under examination whether it uses for a place besides
or a friend is yielded.
View detail
Since the mall of the screen of MRA had deteriorated, I purchased to exchange. Although the old one was bug, when I'm going to attach the delivered one, it is hard. (It does not enter, although today's air temperature is low.) When doing in front of the s
Since the mall of the screen of MRA had deteriorated, I purchased to exchange. Although the old one was bug, when I'm going to attach the delivered one, it is hard. (It does not enter, although today's air temperature is low.) When doing in front of the stove, it entered frankly. Feeling also changes by about 1000 yen and cost performance is dramatically good. Moreover, such components are prepared so that I can evaluate dramatically. View detail
The goods here were used for external Lockhart's screen for the automobile inspection of GPZ900R. Since I can also choose a color from a clear and smoke although I used smoke, I think that I am convenient. Although Lockhart's screen was a little t
The goods here were used for external Lockhart's screen for the automobile inspection of GPZ900R.
Since I can also choose a color from a clear and smoke although I used smoke, I think that I am convenient.
Although Lockhart's screen was a little thick from the screen of MRA, it has been used without the problem.
However, since tabling of a mall becomes loose, we do not recommend you desorption in which days pass since wearing, and reuse.
View detail