Stc.Design Motorcycle Stickers / Decals Reviews

Filter

Write a review and get Webike Points!

Reviews

Stc.Design Stickers / Decals Clear all

KIJIMA

14 Mar 2024

3M Dinoc Film

Fits: その他

Japanese Webike user

5/5

It's just like that.

[How is it used?
To prevent paint from peeling and rust on my KLX125 that I bought with the intention of using it for mud play etc. Let's put a Film on the Frame." I decided to try something other than a transparent protective film, and after examining various options, I arrived at this product.
How was your experience with it?
As of 2024, similar products are available from various manufacturers at reasonable prices, but at the time of purchase (about 10 years ago), there were few of this type of product and it involved a fair amount of expense.
However, the adhesive strength of the film is high due to the fact that it is Seat made by 3M, and it is a very good product because it can be firmly attached to round pipe-shaped areas and some unevenness with heat from Dryeretc.
the last "Carbon Style" So, if you look at it up close, you can easily identify it as a fake product, but if you look at it from a distance... it is not so bad.
How did it compare to other products?
At that time, there were still few products of this kind, and there were no comparable products at the time of purchase, but compared to similar products in recent years, the adhesive strength is not inferior, and it is hard to peel off at the place where the adhesive is firmly attached by following the procedure. The adhesive is so secure that it is durable as long as you do not intentionally peel it off even when washing your car using a high-pressure washer.
[Points to note]
Free to Cut Seal." So, make sure to carry out the process before applying (Rust, dust and oil removal, etc.).
Other items that would be helpful
The deciding factor in the purchase
Strong adhesive strength to fix even OEMAeropartsetc. of a car with Double-sided Tape. Made by 3M. I think this was the most important factor in selecting this product.
[How is it used?
As mentioned above, it is used to prevent Wound on Frames and other steel product parts that would look bad due to Rust or scratches if left in place.
【Included Parts:presence or absence】.
One 300×400mm Seat and one sheet of paper with product description & how to paste Guide.
[ITEMS TO BUY TOGETHER
If you want to use it on a complicated shape or over a large area, use a degreaser (parts cleaner, Enamel thinners, etc.), and if you want to use it on a place where you can see if it is rusted, use a rust remover (wire brush, sandpaper, chemical products, etc.) and a rust remover afterwards. and a rust remover afterwards.
If you have a pen-shaped art knife (Scissors or Cutter) for shaping, it will be even easier to cut the excess portions.
Opinions and requests to Manufacturer.
It would be useful to have a larger (500×1000mm or so) film for wide-area use. View detail

SUZUKI

05 Mar 2024

Rim Stripe Tape

Fits: SUZUKI GSX-R125, SUZUKI ADDRESS110, SUZUKI Address125, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM650XT, SUZUKI SKYWAVE250 burgman, SUZUKI BURGMAN200, SUZUKI GSX-8S, SUZUKI SV650X, SUZUKI SV650

Japanese Webike user

5/5

Fashion starts at your feet

Rim sticker will be attached!
This is not practicality, but a complete dress-up (laugh).

[Before pasting to …
Select the color of the MotorcycleRim sticker.
When I thought about what color Rim sticker to use, here is what I came up with 。
。 If the color next to the Motorcycle color is the Rim Sticker color, it will give a coherent and soft impression.
*Similar colors are the use of two/three adjacent colors in a hue ring.
●●* Use complementary color schemes to create Impact.
If you use a color that is opposite to the Motorcycle color, Contrast will be stronger and the impression will be more Impactful.
*Complementary colors are the opposite colors of the hue ring.
●*Using a three-color scheme, the product is both colorful and impactful. 。 If you use Motorcycle's colors and two colors that form equilateral triangles, you can create an Impact combination with three colors.
* A three-color scheme is a three-color version of a captive color scheme.
White and black go with everything.
All colors are white when lightness is increased and black when lightness is decreased. 。 In other words, unsaturated White and Black go with any color.
Same color as the player you admire 。 My lucky color etc.

→As for the color, since the Wheel is Black, I chose Red based on the principle of a three-color scheme.

(2) Check the Rim width.
Measure the width of your Motorcycle Rim and choose the largest size that can be stretched to that width. If the width is thicker, the impression of the area is stronger, so it does not bother you. Is distortion bothering you only at first? It depends on your personality, but the distortion of Rim sticker will bother you only for a while after you put it on. 。 It will not be a concern soon.
When a narrow rim sticker is used, it becomes a double circle with the Wheel outline. 。 This causes noticeable distortion of Sticker.

MotorcycleRim sticker tensioning instructions
[WATERING] The way is Commendation,
● Separate 1 pc at a time. The goods are thus Quantity:Several pieces on a 1 pc. mount. 。 This is then separated by 1 pc so that Sticker is unaware of it. 。 This way, 1 pc is easy to handle and easy to put up. 。 No damage to other Stickers during application 。 It is tedious, but there is no way to put them up neatly without putting them up one at a time.
↓
●Wash the Wheel to beautify. Wash and degrease the wheel, as residual oil will make it easier to peel off.
↓
● Dilute kitchen detergent and place in 100 Spray.
↓
The water is applied to the rim. After spraying soapy water, place the Sticker on the Rim 。 While wet with soapy water, fine adjustment is possible, so position it and once it is fixed, wipe the top with Towel or similar to remove water and fix it in place. 。

[Hang of the tensioning method].
Float the front and rear wheels…If you don't float the Wheel and put it up, it will be troublesome! It is easy to put up the wheel by floating the wheel with Center Stand or Motorcycle Stand. 。 If the rear wheel cannot be lifted, move the Motorcycle a little at a time, or turn the Wheel by tilting it toward the Side Stand. 。 Even a simple STAND is useful enough for ChainMaintenance, etc. 。 It is convenient to have one.

good point
● It will look really cool!
The durability of the parts can be expected since they are SEA BASSOEMOption Parts.
Easy to apply as it comes with a backing paper.

important point
Water tension is less likely to fail.
Degreasing is a must.
Do not do it all at once, but check the position of the seal and slowly remove air bubbles between the seal and the car body.

Of course, the Shop will do it for you, and there may be fewer failures (some Shops are not good at this). (Some shops seem to be bad at it.) However, it is possible.
You can think of your own color and put it on by yourself… It will also increase your love for your car. View detail