Reviews
DAYTONA Re-Helmet
It is easy to use because it has a strong airflow and a timer. View detail
DAYTONA Re-Helmet
I bought this for use after touring. I used to use a Plasma Raster, but the airflow is so much stronger than the Plasma Raster, so I am expecting a Large for use after touring in the middle of summer. View detail
Maybe it's just my imagination, but it seems to work!
I have been using it for over a year now, and in that time, the inside of Helmet has never started to smell, so I think it works reasonably well.
I own 3 Helmets and use them differently, and I always deodorize each one with this after Riding. Two of them can be washed with the interior removed, but I have not washed them yet. (Don't tell me it's dirty.) Even so, there is no smell. I always put on the helmet after putting on the head cap, so it may be related to the fact that sweat does not penetrate directly into the helmet's interior.
The first, Jet helmet, was purchased with RedCUB 5 years ago and was used year round at first, but about 3 years ago I bought a half helmet for summer use and used it in fall and spring, and about 2 years ago I bought a System helmet for winter use and limited it to spring and fall use.
In other words, the interior washable Jet helmets are worn almost exclusively in the spring and fall when the weather is nice, so they do not sweat much, and the washable winter System helmets are worn almost exclusively when the temperature is cool, so they may not smell as much. Still, the non-washable half helmets are worn during the sweaty season, but they do not smell. This may be due to the fact that the wind does not blow in as much and the head cap keeps sweat out.
The top surface on which the helmet is placed is sloped toward the front, but I feel like the helmet might slide down. The vent is raised, so I don't think it will get caught and slide down...but it would be nice if it were a little gentler.
The body is Type C and comes with a Type A-C Cable.
I always use it at maximum air volume? 3 hours operation, but with a 10000mAh Mobile Battery, I can run it 3 times +/-, which is quite eco-friendly.
View detail
They come in handy
Even if it gets wet from sweat or rain, you can dry and deodorize it all together just by leaving it here.
It is likely to show its true value especially in the summer.
It is simple to make, but I feel it is effective.
It is good to have consumable Parts such as Filter so that it can be used all the time.
View detail
For storage of removed Shield!
[How was the product?
As the name suggests, this is a pouch for storing and carrying Shield, and the material is made of fine-grained fabric to prevent wounds from sticking to the Shield when it is put in and out of the pouch. Also, the size is (side) 26cm× (Vertical) It is a generous size (46cm) and can accommodate a variety of Shield shapes. I would have preferred a size that fits the Full Face Shield, but it's a little hard to tell from the picture. I would have preferred a size that fits the Full Face Shield, but it's a little hard to tell from the picture on the site!
For now, the use of the Porch I purchased is to store Shield at home, so I will hold out for Size.
Other than the Size, the material and design is a good product.
View detail
RE:MET
It is useful for drying wet helmets and gloves on rainy days.
Air volume control (low, medium, high) and Timer (1, 3, 6 hours) are convenient.
It is helpful because it dries a Large body overnight. (Used on high, 6 hours)
I think the deodorant is working because it doesn't smell bad. Maybe in the summer the effect will be a huddlerill?
View detail
I had no intention of ever buying it.
I knew about the product, but until now I had no intention of buying it because I didn't think I'd have any use for it,
I borrowed them from an inn when I got wet in the rain during last year's Hokkaido Touring and they worked so well that I bought them.
Universal, as it can be used not only for helmets and gloves, but also for boots.
View detail
characteristic (of someone)
No human being is odorless.
Anything that is in close contact with the body will have body odor attached to it.
I bought it to maintain hygiene.
I think it is necessary in summer because of the large amount of sweat and sebum.
View detail
Sweat sebum Prevention
I would prefer not to have my own smell, which has been stained over the years, not to say it is offensive.
I bought it because I am concerned about perspiration in the summer and sebum often in the winter, and I want to control the smell as much as possible.
View detail
Helmet can be cleaned!
[How is it used?
I can dry my helmet and gloves,
It is especially useful in the summer.
Was the one you received as per Image?
It was just like the Image in the photo shown.
How was your experience with it?
Bracket for hanging gloves can be stored in the back,
It is good that it is not bulky when stored.
It comes with a Timer, which is convenient because it can be left alone.
I purchased Black, but the USB Cable that came with it was White,
We felt that it would be better if the Cable could also be color-coordinated.
[Points to note]
ACAdapter is sold separately, so commercially available USBCharger (2A or more) The following items are required.
View detail
Interior drying for comfort
Helmet's interior drying had been done with an electric fan, but this product was purchased at a discount.
It's a lot easier than fan drying because all you have to do is put the Switch in and place the Helmet.
We would like to check the deodorizing effect next summer to see if it works.
Some people say that it is difficult to adjust the air volume after placing the Helmet, but before placing the Helmet, you can use the Quantity:Set and there is no problem.
I have no complaints because I can just move Helmet out of the way when I want to switch in the middle of a session.
The surface is prone to minor scratches, so the included Seal is applied to protect it.
Adapter is a 5V-2.4A one from 100s with no problems. (At first, I used one with less than 2.0A and it did not produce high airflow.)
View detail
Deodorizing, drying Max.
Degree of Helmet use (If covered) I use it for View detail
Replacement of defective products.
It seems that the item we purchased was defective. We reported the symptoms and received a replacement request from the Manufacturer.
It takes about five days to receive the request, send the defective product, and receive the inspection report and replacement product.
The very quick response and honest reporting of the cause of the problem as an abnormality of the underlying wiring increased my trust in DAYTONA. However, if the response is too quick, then conversely, there may be many defects in this manufacturing lot or in the product itself, and there may already be some data. (I myself work for Manufacturer's defect analysis.)
And I knew that when I opened the package, it was covered with dirt and fingerprints as before….
Please note that germophobes should be aware of this.
At any rate, I have been using the replacement for 1-2 hours each time I wear Helmet, and so far it is working fine without powering down this time.
docomo MobileCharger02 (Catalogue specifications output 1.5A) so "strength" The 1-hour Timer works perfectly well with a
I think this could go on the road, and since the Mobile BatteryBody can be charged from USB while on the road, it would be a good idea to carry it with you if you have room in your Trunk or Bag Space when Touring.
If possible, there should be a special Bag for it….
View detail
This is the best!
It's great! I always use it after wearing Helmet in summer and winter. It doesn't give me warm air, but it's great after rain. View detail
The functionality is good, but the position of the Switch is bad and the product looks used when opened.
I also bought a new helmet with the replacement of the Motorcycle, so I also popped this one in while I was at it.
Spray lightly with Resesh, Jet helmet is airflow "strength" 1 hour at Full face, Full face is air volume "Inside I tried it in about 2 hours at
The result is not a warm breeze, but if you just want to dry, the airflow "Inside It will dry in an hour at
I don't know about the deodorizing effect on items with sweat or scalp odor on them since Helmet itself is still new, but the smell of the recesh was gone, so it may have a deodorizing effect.
The Instruction Manual stated that the power source to be used should be 2A or higher, but I tried using my docomo PocketCharger02 fully charged and found that the airflow "Inside The system could be used for 2 hours at
After 2 hours of operation, the remaining battery power of the PocketCharger itself was about half orange Lamp, so it may have still had some extra power left, but this is just for reference as there may be individual differences between each Mobile Battery.
The specifications are 1.5A, as shown in the image below.
For use inside the home, we recommend using more than 2A of power normally.
Volume of concern is airflow "Inside If so, it's not that much of a concern, "strength" The "Large" size is a little too large for the "Large" size. I think it's a little Large.
If you are prepared for a certain level of noise, you will not be bothered by it.
Unfortunately, switches cannot be operated with full face.
Why didn't they place it on the side of the Body? The only question that comes to mind is.
Another concern was that there were fingerprints and smudges on the Body when the package was opened. (See Left Side and upper side of Body photo)
The power suddenly turned off once while in use, so I wonder if it might have been a defective item that was returned to us for inspection and found no abnormalities, so it was shipped out again as is. Whatever the case, the second-hand feeling was very disappointing.
The sudden loss of power was when I was using it connected directly to Adapter, so if I see the same symptoms again, I will consult with you as a defective product.
At any rate, I plan to use this one for 30 minutes to an hour every time after using Helmet, even in winter.
View detail
If you are a Jet helmet user
When it was first released, it was out of stock throughout the Season, and I bought it when it was finally in stock.
I don't ride for very long and Helmet is not that still, but I think it would be refreshing just to have it blow dry. I feel that way.
The body is slightly sloped forward and downward, so a Jet helmet without a chin section might roll if you try to place the front of the helmet facing forward. It will probably roll down.
I think Full face could be placed in a good fit.
Finding just the right power supply may be surprisingly difficult. In my case, the Tap was in compliance with the standard, but the Cable was not good enough to work. I think it's enough for normal use) would work, but it's not long enough to get to our Outlet…….
It is time-consuming to find a power supply with the ideal length and shape, but even if Included Parts:is included, there will be dissatisfaction with each part, such as long or short, or this shape takes up too much space, etc. So, the fact that it is cut down to the length and shape is a good thing. I think it is a good idea for riders who are in the habit of making adjustments to their own specifications.
View detail
very good
The effect is outstanding.
Odors such as perspiration are 99% gone.
However, the air volume adjustment button is reversed.
in notation
1:Weak 2:Medium 3:Strong
In fact.
1:High 2:Medium 3:Low
There is no problem in use, but I was puzzled at first.
View detail
Drying and Refreshing
In the summer, the inside of the helmet gets sweaty, so I used to use a certain company's disinfectant/deodorant spray, but after receiving this product, I took it off and set the air volume and timer to the quantitative value as it was.:It can be dried completely just by Set and can be used without worrying about the unpleasant smell of sweat.
Although it looks cheap for the price, I think it is an excellent functional product.
It makes quite a bit of operating noise when it is present, but it does not bother me unless it is placed in a living room. I recommend it especially for those who use Motorcycle frequently in the summer.
View detail
Essential Items for Summer
[How is it used?
Used for Helmet and Gloves after use
Was the one you received as per Image?
Unchanged from the published photo.
How was your experience with it?
Available for Helmet and Gloves.
When used for Gloves, there is a dedicated Adapter that should be used.
I'm not sure about the installation position when the helmet is hung to dry,
It seems to be no problem because the Large body can dry without any problem.
The button is an electrostatic touch type.
Basically, the airflow is set to Max and Timer is also set to Max.
The sound at Max air volume is reasonably Large and can be heard when placed in a room.
Gloves are not a problem when used, but when using Helmet,
The switch is located inside the helmet, making it difficult to push.
When Helmet, it is better to put Helmet after it is activated.
The condition after use is well dried and there is no smell of sweat in the summer.
The same goes for Gloves.
I felt it was essentialItems for the summer season.
It has a filter on the inlet, which seems to be a deodorant.
It appears that they can be purchased as consumable items.
The body itself is light and not too large, so it will not get in the way.
[Points to note]
Proceed with the Button push ahead when using the Helmet.
How did it compare to other products?
No comparison products.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
It would be even better if the switch could be positioned so that it can be checked even after the helmet is installed.
View detail
Excellent Products
Now there's a way to ionized and dry your helmet and hat or any, great design. And its power output is usb, very good and portable. View detail