【DAYTONA】Helmet deodorization/drying machine RE:MET(Re-Helmet) Review

Maybe it's just my imagination, but it seems to work!

I have been using it for over a year now, and in that time, the inside of Helmet has never started to smell, so I think it works reasonably well.
I own 3 Helmets and use them differently, and I always deodorize each one with this after Riding. Two of them can be washed with the interior removed, but I have not washed them yet. (Don't tell me it's dirty.) Even so, there is no smell. I always put on the helmet after putting on the head cap, so it may be related to the fact that sweat does not penetrate directly into the helmet's interior.
The first, Jet helmet, was purchased with RedCUB 5 years ago and was used year round at first, but about 3 years ago I bought a half helmet for summer use and used it in fall and spring, and about 2 years ago I bought a System helmet for winter use and limited it to spring and fall use.
In other words, the interior washable Jet helmets are worn almost exclusively in the spring and fall when the weather is nice, so they do not sweat much, and the washable winter System helmets are worn almost exclusively when the temperature is cool, so they may not smell as much. Still, the non-washable half helmets are worn during the sweaty season, but they do not smell. This may be due to the fact that the wind does not blow in as much and the head cap keeps sweat out.

The top surface on which the helmet is placed is sloped toward the front, but I feel like the helmet might slide down. The vent is raised, so I don't think it will get caught and slide down...but it would be nice if it were a little gentler.
The body is Type C and comes with a Type A-C Cable.
I always use it at maximum air volume? 3 hours operation, but with a 10000mAh Mobile Battery, I can run it 3 times +/-, which is quite eco-friendly. View detail

If you are a Jet helmet user

When it was first released, it was out of stock throughout the Season, and I bought it when it was finally in stock.

I don't ride for very long and Helmet is not that still, but I think it would be refreshing just to have it blow dry. I feel that way.

The body is slightly sloped forward and downward, so a Jet helmet without a chin section might roll if you try to place the front of the helmet facing forward. It will probably roll down.

I think Full face could be placed in a good fit.

Finding just the right power supply may be surprisingly difficult. In my case, the Tap was in compliance with the standard, but the Cable was not good enough to work. I think it's enough for normal use) would work, but it's not long enough to get to our Outlet…….

It is time-consuming to find a power supply with the ideal length and shape, but even if Included Parts:is included, there will be dissatisfaction with each part, such as long or short, or this shape takes up too much space, etc. So, the fact that it is cut down to the length and shape is a good thing. I think it is a good idea for riders who are in the habit of making adjustments to their own specifications. View detail

Helmet is cleaner every time!

Even though the interior of my current Helmet can be removed and washed, if I had to wash it every time during this season, it would wear out and become more and more damaged. I had bought Spare for the interior, but I felt I was finally reaching my limit, so I bought this deodorizer and dryer, which I had been curious about for a long time.
The feeling of using the Helmet is not difficult as all you have to do is turn it on and place the Helmet. Just adjust the air volume and time according to the day's use. As for the effect, I think it is quite good. The smell will be gone and the feel of the Helmet will be better, so you can wear the Helmet without any worries.
Some people say they don't feel the effect, but it is possible that the sponge inside is soaked with dirt, so if you wash it, it will be reset and you will start to feel the effect. View detail

2nd unit

DAYTONA's first generation?Helmet deodorizer DP-H1 was used.
I was wondering what to do when the launch ended and this one broke.

Whereas the first generation was only power on/off.
This one has Buttons for air volume and time.
In the first generation, I used to leave it on almost 24 hours a day when I used it.
It seems that continuous use of more than 12 hours is not a good idea this time.
So I am using it with the air volume at the Largeest and Timer 6 hours.
I think the airflow is more than the first generation when the airflow is at its most Large.

The first one is Plasma ku Raster and this one is Minus ion called Ionissimo.

I Sprayed and used fa BREEZE before using it.
So far the smell of Helmet has not been a problem.

It is also a Helmet storage area, and it feels good to always have a dry Helmet available.

The question now is how long the life of the Body and the minus ion generator will last. View detail

You'll feel like you're wearing a clean Helmet every time.

First of all, I can do Helmet and I am grateful that I can do Gloves.
It also serves as a Helmet storage area, thus killing three birds with one stone.
However, it would have been better if there was a little more ingenuity in the button operation with the Helmet in place. View detail