Reviews
![Seat Cover (High Quality Type) [SY-107V]](https://img.webike-cdn.net/catalogue/images/13570/43554024_TS.jpg)
Fits: YAMAHA SEROW225, YAMAHA SEROW225
The fabric is slightly thicker than the company's SY-107Type.
[How is it used?
We decided to reupholster the seat of a 1997 SEROW225 WE that we acquired two years ago. The seat had originally deteriorated, but due to playing in the mountains, etc., the surface skin had reached its limit.
I searched Webike for Seat fabric to reupholster. MotorcyclePartsCenter. There were only two products available, both in the same color scheme as the OEMSeat type, and I was torn between buying one or the other, so I decided to buy both because they were cheaper.
This time in Webike's product introduction section. "High quality" It was described as (Price at time of purchase:3,150 yen) This will be a review of Seat fabrics in the "Seat fabrics" section.
How did you like it?
As I said above. SY-107V (High Quality Type) When SY-107. (Standard Type) The Standard Type was actually used for the Seat reupholstery work, as we purchased the Seat fabric at the same time as the Standard Type.
If I write honestly. If you weren't told, you couldn't tell them apart just by looking at them." and if you touch it, you'll find that the high quality Type is more like A little thicker?" It was like
Well, the price of Standard Type is 2,830 yen and High Quality Type is 3,150 yen, and the difference is only 320 yen.
When it was listed in the introduction section. The higher one is shiny. The cheaper one is WITHOUT Gloss. However, the actual product arrived in a semi-glossy condition, and although it is hard to tell the difference just by looking at the product, the thickness of the fabric is enough to make the product look like a "good" product. High-Quality Type may last a little longer.
I would like to replace the surface skin of my current Standard Type with this product when it becomes useless.
How did it compare to other products?
Compared to the Standard Type SY107, which I purchased at the same time, if there is a price difference of 320 yen, would it be better to purchase this product, SY107V?
Incidentally, as of February 2024, YamahaOEM's Seat assembly. is no longer available, but you can still purchase it at Seat CoverSingle Item! (17,380 yen) 。
Even though the fabric is a little thicker than the Standard Type, it is not as good as YamahaOEM's Seat fabric, but considering the price, I think this product is well worth purchasing.
[Points to note]
When reupholstering, if the Tucker is driven in halfway, there is a risk that the fabric will break from there.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
I usually post PartsReview with hanghang and use my WebikePoints that I have saved up, so I can buy them at Webike. SEROW225. The only two types of Seat fabric for reupholstery for the new car were available in MotorcyclePartsCenter's lineup.
(Seat fabric from Universal Product was not an option because we wanted to use the same color pattern as the OEM.)
[How is it used?
I enjoy all kinds of Situations, from everyday city driving to mountain play.
【Included Parts:presence or absence】.
Seat CoverQuantity:1 pc. only, this one also did not have Tandem belt, 1995 (4JG2) From SEROW225 W onward, Tandem belt is not included even in OEM, so there is no problem.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
Vinyl bag with large diameter to prevent flooding of the seat sponge (Large sturdy with Vinyl bags for Garbage collection) is different for each person, so those who use it should purchase it while they are at it.
In my case, I do not use Vinyl, but I apply SiliconCoking agent to the seams on the reverse side of the Seat fabric to prevent water from seeping through the seams.
Opinions and requests to Manufacturer.
I honestly think it would be better to use this product as a 1 pc system. I would like to continue to use Lineup, but I am thankful that I have a choice.
View detail
Fits: SUZUKI GSX750S1, SUZUKI GSX750SS, SUZUKI GSX750S2, SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX750S1, SUZUKI GSX750SS, SUZUKI GSX750S2, SUZUKI GSX1000S, SUZUKI GSX1100S
KATANARefresh
Replaced by KATANARestore, no problem with OEM parts shape. View detail
Anyway, it's expensive!
[Personal Thoughts
Good impression
Looks great! It also improves the footing somewhat!
Bad impression
It is shaped to prevent the body from falling backward for the Drag race, but it seems to be effective only when the body is bent over in a forward leaning posture. If you sit on it normally, you might slide backward. I thought it should have more angle.
Seat is much harder than NORMAL.
The fabric makes the seat slippery and my butt slides around.
Bracket needs to be adjusted because the mounting bolt does not fit easily.
The back of the Seat is very poorly made. There are many scratches on the back of the Seat, which are caused by cutting the excess fabric with a cutter. (Lol) SeatSome stains are stuck in the gaps between the seams that can't be removed.
Na! Ni! Yo! Ri! … It's crazy expensive!
With an outside Seat, you can buy two.
I would have preferred to buy an OEMColored Seat?
View detail
It's just plain cool.
I never tandem on my RR-R so I took the plunge and changed it. being OEM and durable, I had no problem putting a Seat bag on it. It's just plain cool. View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION
What an amazing experience for my first Webike purchase.
Fast shipping Genuine Kawasaki Part (rear seat cowl) KRT edition Amazing experience overall Thanks Webike! I'll definitely be a repeat customer View detail
![Seat Cover [SY-107]](https://img.webike-cdn.net/catalogue/images/13570/3535950_TS.jpg)
Cheap, thin, but usable.
[How is it used?
This 1997 SEROW225WE, which I acquired two years ago, was purchased by an acquaintance of mine six years ago, and I had done a fair amount of repair work on it when I bought it six years ago.
After receiving it the year before last, we prioritized restoration from a functional point of view, but the Seat Cover, which was originally on the verge of unraveling because it had been used for playing in the mountains during that time, had reached its limit.
I searched Webike for Seat fabric to reupholster. MotorcyclePartsCenter. There were only two products available, both in the same color scheme as the OEMSeat type, and I was torn between buying one or the other, so I decided to buy both because they were cheaper.
This time The cheapest one (price at time of purchase:2,830 yen) Review of.
How was your experience with it?
When it was listed in the product section. The higher one is shiny. The cheaper one is WITHOUT Gloss. The actual product that arrived was semi-glossy and I could not tell the difference just by looking at them. When I touched them, I found that the more expensive one (SY107V) had slightly thicker fabric and seemed to last longer than the less expensive one (SY107).
How did it compare to other products?
Incidentally, as of February 2024, YamahaOEM's Seat assembly. is no longer available, but is still available in the Seat CoverSingle Item (17,380 yen).
As expected, the fabric is thinner and less durable than YamahaOEM's Seat fabric, but at this price, it makes enough sense.
[Points to note]
As mentioned above, the Seat fabric is thin, so if the Tucker is driven in halfway during reupholstering, there is a risk that the fabric will break from the Seat Base.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
I usually post PartsReview with hanghang and use my WebikePoints that I have saved up, so I can buy them at Webike. SEROW225. The only two types of Seat fabric for reupholstery for the new car were available in MotorcyclePartsCenter's lineup.
(Universal Product's Seat fabric was not an option because we wanted to use the same color pattern as the OEM.)
[How is it used?
It is used in various Situations from street riding to mountain play.
【Included Parts:presence or absence】.
Only one Seat Cover, no Tandem belt was attached. To begin with, Tandem belt has not been attached to SEROW225W since 1995 (4JG2), even OEM, so there is no problem.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker, a slightly larger version of Stapler. and short-legged core.
Vinyl bags of Large size (Vinyl bags for Garbage collection and Large sturdy) are available for each person as a measure against flooding of the seat sponge, so those who use these bags should purchase them while they are at it.
In my case, I do not use Vinyl, but I apply SiliconCoking agent to the seams on the reverse side of the Seat fabric to prevent water from seeping through the seams.
Opinions and requests to Manufacturer.
In these days of daily whispers of skyrocketing prices, it is very nice to be able to get Seat fabric at this price.
Please keep up the lineup continuity.
View detail
![COZY Seat [70s Series] Type K0](https://img.webike-cdn.net/catalogue/daypic140709/74922_1_l_TS.jpg)
Absolutely fantastic
Very impressed with the customer service and communication, definitely earned my trust for future purchases, thanks guys :) View detail
Fits: HONDA CT125, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB 90DELUXE, HONDA SUPER CUB70DELUXE
CT110 HUNTER CUB Tandem seat
I bought it because it is removable without tools.
Installation was a bit of a struggle at first because of the narrow gap under the normal carrier, but once you get used to it and get the hang of it, I think it will be easy.
I usually leave it on all the time without any problem, and I think it looks cooler than the Normal carrier alone, which makes the Rear look tighter.
When touring, it is easy to remove, so you can quickly change to the Container and go out in comfort.
If you are the kind of person who occasionally goes touring
I would recommend it.
I would have liked the tandem belt to be a little stiffer and tighter.
View detail
I used it on Cushion for a chair.
This is the third time I have used this Seat sponge.
At first I used it to improve the OEMSeat of the Initial Model Grom, which was a pain in the buttocks.
Reference https://imp.webike.net/diary/205834/
The second one. Torture Seat" The Seat of KLX125 (Initial Model) was used to convert the Seat to a wider Seat. It took a lot of time and effort, but the result was satisfactory.
This is https://imp.webike.net/diary/205834/I showed how to do it in
The third time I used it to improve Cushion for chairs.
The Cushion for home use has a very soft and thin Sponge, so it quickly becomes floppy.
Therefore, we decided to substitute the Sponge with this product, which is a urethane product for motorcycles.
First, take out the Sponge inside from the Cushion.
Shape the eyeNetSponge to that same shape.
Cutter knives are often used to cut urethane sponge, but it is always hang to use new ones. If the teeth become even slightly rounded, the sharpness will deteriorate.
This time I cut it with Large type scissors because it is thin.
Two sheets were not enough, so I also used leftover eyeNetSponge that I had saved.
Bond is used to attach eyeNetSponge.
When the shape is the same as the original Sponge, place it in Cover to complete the process.
Feeling of use
Hmm? Better, but still not good enough.
Songe lacks thickness.
A thickness of 2 cm does not seem to be sufficient to create a comfortable seat that wraps around the buttocks.
If the thickness is 4 cm, the seating comfort would be satisfactory.
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M
Too slippery.
Crf250rally50, thank you md44 for your help, I also purchased it for the proper Position
The material of the outer skin is rough non-slip fabric that sticks to the pants like magic tape, so I can't slide my butt on it.
Regular Seat fabric would have been even better.
I have applied Silicon spray as much as I want to help my butt slide, but it still gets stuck.
It is better to replace only the Seat cover.
I like the Seat shape.
View detail
Fits: KAWASAKI KLX125, KAWASAKI D-TRACKER125, HONDA XR50Motard, HONDA XR100Motard, Others , HONDA DAX125, HONDA CL250, YAMAHA XSR125
For Dax125
Installation was easy as I just put it over the Seat.
It looks good.
Mesh and breathable, so in winter my butt is cold. It seems to work well in summer.
Cushioning is also possible, but I haven't ridden it for a long time, so I don't know yet.
Since it was winter when I purchased it, I will remove it now and use it in the summer.
View detail
Fits: KAWASAKI ZX-4R, KAWASAKI ZX-4RR, KAWASAKI ZX-25R
Great sport seating position, good for city as well!
I am 175cm tall, and after installing the seat, I am able to stand on the balls of both my feet. WIth the original seat, I am able to place both feet flat on the ground. The raised seat makes me lean forward slightly more, reminding me to grip the tank with my legs rather than leaning on my wrists. Seating position is more sporty compared to OEM seat, i.e. sitting on top of the bike rather than inside the bike. Comfort is perfectly fine for street. If it is too harsh, perhaps you can adjust the compression and rebound settings on rear shock. Installation is easy - you will have to partially remove the side fairings to access some screws. It is NOT a drop-in replacement. Access to battery and fuses will be inconvenient after installing as you will need to remove fairing, screws and seat mount, before accessing battery and fuses. (It should not matter much but good to know information). Be careful not to strip the OEM bolts near the tank, they are very soft. Deduct one point as rubber seat provided has holes that are not very accurately cut, impacting the positioning somewhat. You might be luckier than me. Product shipped about 1 week earlier than estimated. Overall very satisfied. View detail
FACTORY EFX Seat cover ALLGrip
crf250lmd47OEMSeat cover had a tear and I replaced it with Other Brand Product because I had to. I bought this product this time. The shop said that the Seat fabric was hard and sometimes tore when pulled and tucked. Still, I was satisfied with the beautiful reupholstery. Is there room for improvement in the quality of the fabric? View detail
Uncoated and used
I wanted the high seat set up on the Z125, but it was about 30,000 on ebay!
I couldn't afford that kind of price for Seat in SL, so I made it myself.
Ancho is a 20mm thick Sponge sold in Jungle for about 600 yen, OriginalCover is removed and glued.
Shave it with a grater Gold to shape it and cover it with this product.
The SIDE of the original anchor was cut off to fit.
The surface of the Seat has a non-slip Tank Pad-like texture, and the Grip has been increased.
The OEM has a glued front edge corner so it fits better, but this product has a thicker fabric and sewn finish so the corner fit is a little worse, although it is not very visible once installed.
Also, the anchored area interfered a little with the Rear Sets and I had to push it in quite a bit to get it to lock.
I think the price is low enough for the front and back, but I only used the front, so it would have been even better if the price was lower for the front and back separately.
View detail
Fits: KAWASAKI Ninja 400, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja 250, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 250, KAWASAKI Ninja 400, KAWASAKI Z400, KAWASAKI Z250
My knees feel better.
I switched to a high seat because the knee bend is tight in a normal seat and my knees hurt when I ride for a long time. I am 170cm tall and wearing riding shoes, and with Normal seat it was sticky, but with High seat, it was just a little more comfortable. When installing the seat, compared to the Normal seat, the front of the seat can be snugly inserted into the body of the vehicle and the seat can be snugly installed. The handlebar seems to be a little lower, but I am glad I bought it because the knee bend is more comfortable for me. View detail
Almost pontooned ??
Image didn't change as much as I thought it would. w
The seating comfort is about the same as OEMSeat!
View detail
Fits: KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator)
kawasaki VN250A seat cover
First, I purchased this for lower price than genuine. More attractive than I thoght. Very good product. Surface of seat is especilly good. No slippery and shape and fir good seat frame. View detail
![[GTR-Series]Seat Assembly](https://img.webike-cdn.net/catalogue/images/120000/21_TS.jpg)
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Stiffer than expected.
I installed it, but the left side has a large rattle and it is harder than I expected, so my buttocks hurt when I go on long tours. View detail
A Seat is a Seat, but it's a Seat
I've never changed my Seat to an OEMSeat before.
I happened to have an OEMOption Seat and changed it.
The quality is better than the price, and it looks luxurious.
Changed early and very happy.
View detail
Fits: HONDA ADV150, HONDA PCX, HONDA PCX150, HONDA PCX160, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA ADV160, YAMAHA NMAX, YAMAHA NMAX155
Summer, rain protection
In summer, my buttocks get steamed without it.
I wish there was one for one person because only one person rides, but it is a PCX125.
However, it is cold between the legs in winter. If you don't like it, take it off.
However, in rainy weather, there is no penetration of underpressurized water from the buttocks.
View detail