Reviews
Fits: YAMAHA TMAX530, YAMAHA TMAX530, YAMAHA , YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA BW'S125, YAMAHA BW'S X, YAMAHA Cygnus X, YAMAHA Cygnus X
Allows for the removal of the wideband O2 sensor from the exhaust pipe after tuning is completed
About quality and texture, I can confirm that the quality is great and that the materials used are stainless steel for the plug bolt and aluminum for the gasket. About the feeling of use, The KN Planning O2 sensor plug bolt fits and seals perfectly into the DynoJet O2 sensor bung that was included in my wideband O2 sensor kit. A necessary addition that allows for the removal of the wideband O2 sensor from the exhaust pipe after tuning has been completed and something that was lacking from the kit mentioned earlier. Products to buy together, Some additional gaskets and anti-seize would be ideal to add to your cart to allow for easier removal and installations of the wideband O2 sensor and O2 sensor plug bolt in the future. Difficulty of installation, I can say the fitment of the O2 sensor plug bolt was very easy due to the ease of access and simple nature of securing the O2 sensor plug bolt with an allen key. Cost performance and comparison with other products, The pricing of the product is great. You receive a cheaply priced O2 sensor plug bolt made of a higher quality material then some brands offer at a higher price. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: YAMAHA TMAX530, YAMAHA TMAX530, YAMAHA , YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA BW'S125, YAMAHA BW'S X, YAMAHA Cygnus X, YAMAHA Cygnus X
Good to know!
I purchased a new Exhaust System with SensorBlind but did not retighten it!
It came off in the middle and was lost.
We purchased it for this purpose.
I'm glad it was there!
View detail
Safe because it is the same Manufacturer
I bought this to put a Silencer for KLX230 on my KLX230R to block the hole for the O2 Sensor that should be installed. KLX230R is a Racer, so it does not have an O2 Sensor.
To reduce the time and effort of searching for the Bolt diameter and Pitch, we chose the same KFACTORY Bolt as Silencer, so we were able to install it without any problems.
Considering the possibility of removing it later, CopperGrease was sewn on to prevent biting before installation.
View detail
Exhaust pipe for Klx125
Purchased for installation of klx125 Exhaust System on Xtz125. View detail
K-FACTORY O2 Sensor Blind Screw
I put it on the O2 Sensor of the Exhaust System of GSX-R1000 k8.
Best Size.
View detail
Exhaust pipe dizzying
[How is it used?
The YZF-R25 is now being racerized with a BEAMS JP250 exhaust pipe.
O2 Sensor is no longer needed due to the introduction of RapidMotorcycleRACING, so this product was introduced.
Was the one you received as per Image?
It was exactly as shown in the picture. I felt that the length was a little long.
I think that the protruding part of the Bolt may be too exposed on an exhaust pipe with a low boss height, which may cause exhaust resistance.
Was the installation difficult?
Gasket is also included, so be careful not to forget to install it.
How was your experience with it?
Gasket is included and is working well with no exhaust leaks.
I am happy with the price because other Manufacturer's products are ridiculously expensive.
The O2 Sensor Blind Screw is loose in the Large body. Therefore, it was necessary to be able to do Wiring.
When you install it, don't forget to retighten and wiring.
Also, since Size is not mentioned in the product description, it is included for reference.
Screw Diameter:M18
Pitch:P1.5
Length:23.5mm
Wiring hole diameter:1.5mm
I don't know what the Material is, but it is something Brass-like. (Laughs)
[Included Parts:were they on?
One Gasket is included. Is this also something that is not sold by Repair?
[Was there anything that disappointed you?
None in particular. As a precaution, it is recommended to apply Thread compound before installation to prevent galling. Especially in the case of stainless exhaust pipe, it is better to apply it because it is easy to bite.
View detail
The boss to process and install Z-AFM to the exhaust manifold
Purchased Z-AFM to install on the exhaust pipe without O2Sensor installation boss I did
I decided on a position and angle where it would not interfere, and had the welders install it, but it cost a lot of money I did
I'm currently removing it, so it's just a Blind lid
View detail
Great product especially considering the price. I had it welded on a Takegawa Bomber exhaust for HONDA MSX / GROM and it fits fine on the 42mm part of the exhaust. It will work on smaller and slightly bigger diameter pipes as well. Can be used to fit most
Great product especially considering the price. I had it welded on a Takegawa Bomber exhaust for HONDA MSX / GROM and it fits fine on the 42mm part of the exhaust. It will work on smaller and slightly bigger diameter pipes as well. Can be used to fit most wide band O2 sensors. Thanks to it be being very slightly longer than most bungs it will not have the O2 sensor too much in the exhaust flow, just what's needed to get a correct reading, something to consider when installing such part on a smaller motorcycle / exhaust. View detail
[Webike Monitor] It purchased as a reserve Parts of an air/fuel ratio system in use. It can be used feeling easy for a Mukawa pure Parts.
[Webike Monitor] It purchased as a reserve Parts of an air/fuel ratio system in use. It can be used feeling easy for a Mukawa pure Parts. View detail
It was attached less than 3000 yen by motorcycle store. Since the numerical value used as the measure of the setting comes out, I recommend for who bore up. There was a big difference in outside air temperature.
It was attached less than 3000 yen by motorcycle store. Since the numerical value used as the measure of the setting comes out, I recommend for who bore up. There was a big difference in outside air temperature. View detail
Although it thought that the pure boss for O2 sensors would not stick and would post-install in the muffler purchased at the auction although not attached yet, since there was nothing rather, immediately after searching here, with the M18.1.5 pitch nut, i
Although it thought that the pure boss for O2 sensors would not stick and would post-install in the muffler purchased at the auction although not attached yet, since there was nothing rather, immediately after searching here, with the M18.1.5 pitch nut, it was by marketing.
Although another Mr. Manufacturer's thing was also looked for, it was an about 3 times [ of the elegance here ] price.
According to the form of a pipe, it was cut with the curve, and shone, and since the price was also cheap, it is large-satisfied.
View detail