Reviews
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 CR-SPECIAL Carburetor, その他 FCR Multi-Carburetor Horizontal (H/Z) Small, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, Others FCR Carburetor Body Single carburetor Horizontal(H/Z) Large type, Others CR-SPECIAL Carburetor, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type
Used for Overhaul of ZrX1100carburetor
KEIHINCVKcarburetor is used not only in Kawasaki but also in many other models at that time. I have been looking for the parts catalog of other companies. This time, I found the suitable O-ring from Repair Parts that KEIHIN sells for FCR Carburetor Body.
Of course it worked fine.
View detail
Same as OEM
I bought this because I was doing an Overhaul on my Carburetor and the Slow Jet was changing shape. This time I bought the same number as OEM, and although I did not feel any change by the exchange, I felt better with the new parts. View detail
Fits: その他 FCR Multi-Carburetor Horizontal (H/Z) Small, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type
FCR Carburetor Bodycarburetor
SingleFCR Carburetor Bodycarburetor Throttle return was poor, so I researched and purchased this one with a stronger spring rate. The return of the throttle was improved as I expected. View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Small, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, Others FCR Carburetor Body Single carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type
Smallest O-ring in FCR Carburetor Body
This is the O-ring that is attached to the Pilot screw, which is the smallest O-ring used in the Carburetor.
This is a part that should always be replaced during regular maintenance, but there are a few things to keep in mind.
Before disassembling, check the speed of the Pilot screw.
The O-ring may remain in the back of the body of the carburetor, and it may be difficult to remove it, but be sure to collect it.
Do not make a mistake in the assembly order of the O-ring washer, spring and pilot screw.
At the same time of replacing the O-ring, please make sure that the Pilot screw itself is not damaged or the GreenBlue is not floating.
View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Small, Others FCR Carburetor Body Single carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type
Required replacement when OH
This is the O-ring that is installed on the outer circumference of the valve seat. If the O-ring is worn out, it will cause unstable oil level and overflow, so it should be replaced at the time of regular overhaul.
When removing the valve seat, use thin pliers to pull out the valve seat without unnecessary force.
After cleaning the Valve seat, carefully press-fit it with lubricant and replace it as if you were press-fitting the Valve seat by tightening the Screw.
View detail
Fits: その他 FCR Multi-Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Small, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type
For Air ventPipe
Each Body of FCR Carburetor Body is connected to each other. "Air ventPipe. This is the URing of
Unlike the Fuel Pipe which was sealed with O-ring. URing. Note that it is sealed in
If you don't read the manual properly and place an order, you'll end up with a mysterious surplus of O-rings.
Air ventPipe and Fuel Pipe are relatively frequent replacement parts because they are sometimes broken by age-related deterioration during disassembly.
View detail
Fits: その他 FCR Multi-Carburetor Horizontal (H/Z) Small, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, その他 FCR Single Carburetor Horizontal (H/Z) Large, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Single carburetor Horizontal(H/Z) Large type
Most frequently used parts of FCR Carburetor Body
This is the Gasket of the Float chamber.
In the case of FCR Carburetor Bodycarburetor, all four float chambers are connected by rubber hose, so it is very difficult to remove one float chamber for maintenance. It is very difficult to remove one float chamber for maintenance.
It is necessary to remove all the float chambers, so when replacing the float chamber gaskets, you need to use a gasoline resistant bond and stick it in the groove, otherwise the workability will be very bad.
If you use the wrong kind of Bond, the Gasoline and heat will melt it and make you sick, so watch out for that too!
View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Small, Others FCR Carburetor Body Single carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type
Accelerate Pump to OH
This is the O-ring of the small one which is placed at the edge of the panel which is replaced when you disassemble the panel of Acceleration Pump.
The Diaphragm and Spring are the most important parts, but if the small O-ring is flattened, there is no point in disassembling it.
It is very small, so be careful not to lose it when unpacking or working.
View detail
Fits: Others CVKCarburetor Main jet, Others FCR Carburetor Body Carburetor MainAir Jet
Reliable OEM
I bought more for Setting.
It is safe because it is KEIHIN OEM.
View detail
Fits: Others FCR Carburetor Body Carburetor for Φ28-Φ33(Small body)
Needle
How many Needle do you buy? I can't seem to get enough of throws, so I'm having trouble with it. So far, this Needle is the best one, so I'd like to see how it goes for a while. View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, Others FCR Carburetor Body Single carburetor Horizontal(H/Z) Large type
VMAX 1200
I used it on a Vmax 39mm, TWIN×2 so Axel was heavy and it was quite a painful situation, but I was worried about the return with 50% Type, but I can use it without any problem. The lightness became light to the extent that it did not change with the Slot of the FCR Carburetor Body of a normal straight 4, and it was good to change. Please use it as a reference. View detail
Fits: その他 FCR Multi-Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Small, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type
Relief
It was used when the FCR Carburetor Body was overhauled.
It's plastic, and since it's close to the engine, I think it deteriorates quickly.
The exploded view and pictures of the product were helpful.
View detail
Single Item, so it's a bit expensive!
I bought it for setting up CVRCarburetor.
I was able to run somewhat normally, even if I just popped it on right away.
Setting is difficult, but it's a great feeling of accomplishment when you get the fine tuning right.
View detail
Fits: その他 FCR Carburetor Main Air Jet, その他 CVK Carburetor Main Jet, Others FCR Carburetor Body Carburetor MainAir Jet, Others CVKCarburetor Main jet
If you know how the carburetor is doing, you can use Single Item.
It is a recommendation for when you buy extra parts in fuel kit.
It's a Single Item, so it's a bit pricey, but if you know exactly what the problem is, you can buy just the Jet you want.
View detail
Fits: その他 FCR Multi-Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Small, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type
For FCR Carburetor BodyRepair
It's helpful to deal with such detailed Parts.
I was also able to see what number of parts it was in the photos and the additional images to see the Large size in the photos, which gave me peace of mind.
View detail
ResponseExceptional!
I bought it to install in the SEROW225 WE.
Nowadays, I often see CHINACopy, but I'm still looking for a domestic product that can be stable here.
Although various parts and settings are required, the throttle response is much better and faster than before.
I would like to recommend it to the SEROW225 riders who feel the lack of power.
View detail
That's KEIHINOEM!
In conjunction with the GPZ900's conversion to Powerful
Implemented changes to Throw.
So far, there is no problem and low RPM setting out of Idling.
View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 CR-SPECIAL Carburetor, その他 FCR Multi-Carburetor Horizontal (H/Z) Small, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, Others FCR Carburetor Body Single carburetor Horizontal(H/Z) Large type, Others CR-SPECIAL Carburetor, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type
Used in FCR Carburetor Body-MX
Used in the 2009 KTM EXC
There is no O-ringSingle Body setting on the Parts List, so I bought it.
I didn't know if it could be used with the FCR Carburetor Body-MX because I didn't have enough information, but it works fine.
View detail
Basically, no replacement.
In terms of my personal SettingApproach, I feel like this is the first part I wouldn't replace.
But if you have a used Carburetor or something like that, you may have to buy it to return it to its original position.
Quantity that has been driven to a significant Level:If you're going to do a Set, you may need to replace this place, but it's not in the Sunday mechanic dimension to go that far...
View detail
Fits: その他 FCR Multi-Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Small, その他 CR-SPECIAL Carburetor, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type, Others CR-SPECIAL Carburetor
If you don't have one, we'll turn it on.
Leaving aside whether this form of Hose clip is the best solution, if your Hose doesn't have this on it, be sure to put it on.
Personally, I prefer the Band of the Type that occupies with the Driver to this Type because it can be removed more surely.
With this Type, you have to do a good job with Pliers, and the repetitive use is unpleasant.
View detail