Reviews
Invisible part
The Chromoly steel may be more durable than the OEM product. It is not that the durability of the OEM product is bad in the first place, it is just a self-fulfillment. It is not that the durability of the OEM product is bad in the first place. View detail
Fits: HONDA CB1100, HONDA CB1300SF, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA X-4
I feel lighter.
I do feel lighter.
Clutch play is more than OEM, so lever adjustment may be necessary!
Custom feeling is up.
View detail
It's definitely lighter
Installed on a 2014 S1000R
The Clutch is heavy on the S1000R If you run for too long, your Left arm will die (Lol)
After installation 'Oh! It's light!'
Even an insensitive person like me could see that
My only complaint is still the price!
View detail
If it was a One piece structure, it was good
【What made you decide the purchase】
Looking at the article that Clause Wire 's Line becomes a straight line by lengthening Lever by 5 mm and the burden on Wire decreases.
【How was it actually used?】
The wire bent under Thailand's head can now be taken straight.
Improvement, deterioration of Clutch operation is hardly felt.
【Was it difficult to install? (Hard parts case)】
Spanner of M8, M10 and Hexagonal Wrench (For M5, M6 Cap Bolt) Use the.
The installation itself is easy and it will be completed in 5 minutes.
Afterwards you need Grease to paint on Thailand part and medium strength Screw lock agent.
[Is there anything I was disappointed about?]
I was concerned about 2-pieces Structure, but again the play and looseness of this part is a concern.
To the end it is my personal opinion but I think that the price setting is high with respect to the contents of the product.
【Hope for Manufacturer - Please let me know if you have any improvement points]
It is described in the Instruction Manual to periodically check loosening, but I want you to clear it with design and structure.
【Have you compared items?】
We compared it with ClutchArm of GOOSE. Ba GOOSE 's was excellent in processing accuracy and finish, it was attractive that it was a one piece structure, but the attachment on the vehicle body is not locked through the Bolt to the concave portion of Shaft as well as OEM, but fixed by Bolt' s tightening Large anxiety that it is (Minus) It was a point..
I also felt that my flashy Logo was printed.
【Please tell me the point of installation and hang (in the case of Hard parts)】
You can work and adjust exactly if you remove Wire on Handlebar side without troubles.
[Others]
It seems that it can be extended up to the maximum Large 7 mm, but WireLine is adjusted to about 5 mm so that it becomes a straight line.
Because the Handlebar side uses the Achosat 's Clutch Assi, I was worried that the Clutch Wire' s Outer was too long to fit well, but there was no feeling that the bellows part of the Rubber was clogged like the attached photo.
View detail
If it was a One piece structure, it was good
【What made you decide the purchase】
Looking at the article that by making Lever 5 longer, Clutch Wire's Line becomes a straight line and the burden on Wire decreases.
【How was it actually used?】
The wire bent under Thailand's head can now be taken straight.
Improvement, deterioration of Clutch operation is hardly felt.
【Was it difficult to install? (Hard parts case)】
M8, M10 Spanner available for installation. The person who removed the installation can work and adjust exactly.
[Is there anything I was disappointed about?]
I was concerned about 2-pieces Structure, but again the play and looseness of this part is a concern.
To the end it is my personal opinion but I think that the price setting is high with respect to the contents of the product.
【Hope for Manufacturer - Please let me know if you have any improvement points]
It is described in the Instruction Manual to periodically check loosening, but I want you to clear it with design and structure.
【Have you compared items?】
We compared it with ClutchArm of GOOSE. Bar GOOSE's are excellent in machining accuracy and finish themselves is easy and will be completed in 5 minutes.
In addition to the tool, we need Grease to be applied to Thailand part and medium strength Screw lock agent.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Although it was attractive that the Handlebar side Wire and the One piece structure were attractive without troubles, the attachment on the vehicle body was not locked through the Bolt to the concave portion of Shaft as well as the OEM, but it was fixed by tightening the Bolt It was the Minus point of the largest Large.
I also felt that my flashy Logo was printed.
[Others]
It seems that it can be extended up to the maximum Large 7 mm, but WireLine is adjusted to about 5 mm so that it becomes a straight line.
Because the Handlebar side uses the Achosat 's Clutch Assi, I was worried that the Clutch Wire' s Outer was too long to fit well, but there was no feeling that the bellows part of the Rubber was clogged like the attached photo.
View detail
Fits: SUZUKI BANDIT1200S, SUZUKI BANDIT1200S, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI GSX1400, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSF1200, SUZUKI INAZUMA1200, SUZUKI GS1200SS, SUZUKI GSX-R1100, SUZUKI GSX-R1100
There was much long-distance touring, and since it was left grip mitigation, it purchased. Although surely it became light, it is not thought at about 10% that it changed a lot as a manufacturer says. I think that surely this will feel them common
There was much long-distance touring, and since it was left grip mitigation, it purchased.
Although surely it became light, it is not thought at about 10% that it changed a lot as a manufacturer says.
I think that surely this will feel them common if it gets used although the comment used about 250 km had less left fatigue than former, and think that the case where a clutch is used abundantly all over a town, and how to be tired with touring also change.
However, since the banjo adapter contacted the convex part of the clutch release hole outer circumference by the side of a sprocket cover when a banjo adapter was used as it was, the pure banjo bolt of a bandit 1200, and, a little cover side needed to be deleted.
Since it being a little expensive in price and the work which shaves a cover were required, it is three stars evaluation.
View detail
This product of the announcement that the mitigation (theoretical value) of the clutch operation can be carried out 15%. Some this price is felt as kana in slight height to this component. Attachment was very easy. It comes out and is a degree
This product of the announcement that the mitigation (theoretical value) of the clutch operation can be carried out 15%.
Some this price is felt as kana in slight height to this component.
Attachment was very easy.
It comes out and is a degree of an effect.... They are honesty and the grade whether it became light.
However, an effect may come out in a long ride.
View detail