Reviews
High qualities
I tuned z900rs by almostly k-factory parts This product have a high quality and defense dust thing for swing arm hole Good print logo and nice finish I hope to buy silver color too View detail
Does what you hope!
This is really easy to add and gives me a lot of confidence that the area under my seat will stay clean and dry. It's fairly priced too which is nice! View detail
I put it near the Engine! It looks great!
Purchased to put on my PCX125.
It was packed, but it is a little Large strange to give.
I had a hard time opening it and the Sticker was a little bit worn out. This is my only regret, but I think the quality of the Sticker itself is good.
View detail
I like Simple.
Among various manufacturers and colors, we chose a plain and simple one.
I like it because it's NORMAL looking and SIMPLE!
View detail
KatakanaLogo is good for JAPANExhaust System
KFACTORY CSRMegaphone Tail part I bought this sticker to put on my Exhaust System, K-FACLogo sticker was attached to the Exhaust System, but I think KatakanaLogo which is like JAPANExhaust System is better.
The only drawback is that it is an Aluminum heat-resistant sticker, so even if you apply it carefully, the edges tend to get a little wrinkled… This may just be my own clumsiness, but…
View detail
Fits: HONDA CB750, KAWASAKI GPZ900R, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1200S, YAMAHA XJR1300, YAMAHA XJR1300, HONDA CB400Super BOLDOR Revo, HONDA CB1100, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, KAWASAKI ZRX1200, SUZUKI BANDIT1200S, HONDA CB1300SF, SUZUKI GSX-R1100, SUZUKI GS1200SS, YAMAHA XJR1200, KAWASAKI ZZR1100, KAWASAKI ZZR1100
Into the Swamp of Custom
I bought it after I saw it installed in a custom car of Pro shop. I didn't intend to customize BANDIT1200s, but after I put this Parts, I increased the number of popping. I'm going to the swamp. View detail
I installed it on my ZrX1200 DAEG.
It's a pretty fancy Gold. It could be a little thinner. View detail
I installed it on my ZrX1200 DAEG.
I liked the shape.
The product photo shows the shatterproof plate as Carbon Style, but the actual product is Stainless Steel.
View detail
WaterproofSeat for Fender Eliminator
I bought it at the time of the installation of Fender Eliminator of kFACTORY which I acquired. I heard that it can be used for other manufacturers. If you use the Fender Eliminator for your car model, the Large body shape will be the same, but…it came with Instruction Manual, but I don't think it will be a problem. I'm not going to run when it looks like it's going to rain, and so far I haven't been able to feel the effect, but I think it will do the job well. View detail
Fits: KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100, KAWASAKI ZZR1100, KAWASAKI ZZR1100, KAWASAKI GPZ900R, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300 SUPER BOLDOR, HONDA CB1100, HONDA CB750, HONDA CB400Super BOLDOR Revo, HONDA CB400SF VTEC, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1200, SUZUKI GS1200SS, SUZUKI BANDIT1200S
I don't have Fork Guard on my CB1300SF SP.
I've been wanting a Fork Guard for a while now, and I took the plunge!
Installation was a bit difficult, as I opted for the Carbon Plate
I tightened the Screw wrong. [Color] I'm afraid the Clear paint has puffed up in some areas.
It's my mistake and you have to look closely to see it, so I'll call it good.
View detail
K-factory backsplash
My car is a model of z900rs from the kawasaki brand in 2018. I bought a k-factory brand rear mud tile baffle on Webike. The material of this product is PVC plastic, which can perfectly solve the problem of exposed lines on the bottom of the car after the original fender is changed to a short tail. The decoration is very good. I am very satisfied with this shopping experience, thank you Webike! --------------------------------------- ------- My car is kawasaki brands of z900rs model year 2018, I bought a k-factory brand goods on the apron after masonry Webike. This product is made of PVC plastic, can be the perfect solution to the problem changed after the original fender short tail, vehicle line dew, decoration is very good. The shopping experience very satisfied, thank Webike! Powered by Google Translator View detail
Fits: HONDA CB750, KAWASAKI GPZ900R, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1200S, YAMAHA XJR1300, YAMAHA XJR1300, HONDA CB400Super BOLDOR Revo, HONDA CB1100, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, KAWASAKI ZRX1200, SUZUKI BANDIT1200S, HONDA CB1300SF, SUZUKI GSX-R1100, SUZUKI GS1200SS, YAMAHA XJR1200, KAWASAKI ZZR1100, KAWASAKI ZZR1100
Titanium color
Looks Titaniumium color is cool. However, it was difficult to install. I had to use a lot of force to install it, but I am satisfied. View detail
Cool
Heat-resistant Sticker is Material:This sticker is a thin AluminumSeal type while there are many thick Aluminum types. I was worried about the durability, but there is no scorch though I ran more than 1000km. I think that it is a very good product. View detail
It won't burn.
It is used for Short Officer of MONKEY. It's not the sticker of aluminum that is often used, but the thin ordinary sticker that was there in the past. But it doesn't burn or scorch at all. View detail
unconcerned A sense of change is good
I'm using it on a 1999 Kawasaki ZR-7
Although it is not a Manufacturer's compatible model, the OEMParts List shows the Size and Screw Pitch are identical, and I purchased them after confirming that they are identical
I left the installation to the Pro Shop because I was worried about the tightening torque
Whenever I step on a motorcycle, this is the part that I can see Nut A sense of change There is a
It has a higher element of dress-up parts, but compared to Steel's pure STD nut Very lightweight
The only color choice is Silver anodized, but I like this casualness, so I'm not complaining There is none
View detail
K-FACTORY Front Fork Guard (L Size)
Hello. Today I installed the titanium protection of the front fork feathers from dust and dirt, which I purchased, it also protects the travel of the fork feathers well from insects. Titanium is very light material. Installation is very quick and simple, it took one hexagon and one wrench. on the WEBIKE website, I purchased a set of titanium pads for the radiator and a set of pads for the front fork cups, together all these kits look very elegant and give the motorcycle a special personality. Hello. Today I installed the titanium protection of the front fork feathers that I purchased from dust and dirt, it also protects the working stroke of the feathers of the fork from insects. Titanium is a very lightweight material. Installation is very quick and simple, it took one hexagon and one wrench. Before that on the WEBIKE website, I purchased a set of titanium pads on the radiator and a set of pads on the glasses of the front fork, in the complex all these sets look very elegant and give the motorcycle a special personality. translated by google translate View detail
Quality product
It is a well made quality fender eliminator. On my Australian model Zephyr 1100 the top mount for the tail light was slightly different and required extending the stud to make it mount. Not a big deal. View detail
K-Factory logo decal
Very difficult to find this particular decal. Very pleased with the sticker. Superb quality! Very thigh material. L-size was good detail for my fairing. View detail
Fits: HONDA CB750, KAWASAKI GPZ900R, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1200S, YAMAHA XJR1300, YAMAHA XJR1300, HONDA CB400Super BOLDOR Revo, HONDA CB1100, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, KAWASAKI ZRX1200, SUZUKI BANDIT1200S, HONDA CB1300SF, SUZUKI GSX-R1100, SUZUKI GS1200SS, YAMAHA XJR1200, KAWASAKI ZZR1100, KAWASAKI ZZR1100
K-factory front fork guard
Carefully created product as well as pleasing to the eye, it has an effective function of protecting the fork oil seals. Product created carefully as well as pleasing to the eye, it has an effective function of protecting the fork oils. (Translated by google translation) View detail
Fits: HONDA CB750, KAWASAKI GPZ900R, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1200S, YAMAHA XJR1300, YAMAHA XJR1300, HONDA CB400Super BOLDOR Revo, HONDA CB1100, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, KAWASAKI ZRX1200, SUZUKI BANDIT1200S, HONDA CB1300SF, SUZUKI GSX-R1100, SUZUKI GS1200SS, YAMAHA XJR1200, KAWASAKI ZZR1100, KAWASAKI ZZR1100
Excellent product at the height of the commercial organization that sells. Precise and immediate in shipment.
Your products can only embellish and embellish the bike. You are accurate and quick in shipping. You have a high standard of competence. Your products can only embellish and embellish the bike. You are accurate and quick in shipment. You have a high level of competence. translated by Microsoft Translator View detail