Reviews
Fits: KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZRX1200, KAWASAKI ZRX1100
Look number one!
Looks are important! The texture is as good as it gets.
Now we just need to figure out how durable the Gold alumite is!
The Axle Shaft is hollow, so it's a good item for plugging holes, and it's a recommendation for people who use the zrx fork.
View detail
Dress-up!
Purchased for a complete dress-up.
As expected, the Gold One point works better than the picture shows.
The price seems to be high, but it is not something to be replaced so often. I can't help it because I can use it for a long time.
View detail
Fits: HONDA CB400SF Revo, HONDA CB400Super BOLDOR Revo, HONDA CB400SF VTEC
ได้รับสินค้าตามรูปแบบครบตามจำนวน แพ๊คมาอย่างดี สมบูรณ์ไม่มีรอยขีดข่วน View detail
Just the right size feeling
I was looking for a small size one for Z900RS, and I bought it because it was just right size. The quality of the product is very good and I am satisfied with it. However, the color of Gold is not Quantity.:Pair (for Left and Right) One star MinusPoint that was subtly different. View detail
talisman
Very easy to install.
Tools used MONKEY Wrench1pc. 2 sets of Hexagonal Wrench
Replace the existing AxleBolt with the supplied AxleBolt and tighten. Assemble the AxleBolt as shown in the drawing and tighten it with Hexagonal Wrench.
Hexagonal Wrench is 5mm.
He said to check the AxleBolt tightening Torque.
6N-m for the Slider (Recommendation) It seems to be
If you're like me and haven't used a Torque wrench yet, do so at your own risk.
View detail
talisman
Installation can be done in about 10 minutes by anyone with the right tools.
Just remove the AxleBolt and then assemble according to the drawing.
The Hexagonal Wrench is 5mm, but if you only have 1 pc, it will not turn together and cannot be retightened.
The mounting effect is unknown because it cannot be proven without falling, but I thought it would be better than wearing a talisman.
Tools used MONKEY Wrench, Hexagonal WrenchQuantity:2pc
Torque is specified, so it is best if you have a torque wrench.
View detail
Before you fall down.
I installed it to prevent damage to the front fork by falling down. I haven't tested it, but I am sure it will protect me. The parts are very well made and could be installed with confidence. View detail
Fits: HONDA CB400SF Revo, HONDA CB400Super BOLDOR Revo, HONDA CB400SF VTEC
Easy to Mount
The Slider look is smaller then picture. But they are very easy to mount on front axle. Just 5 minute for mounting. And items fit to Honda CB400SF 2020 2BL-NC42. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA
One point of Front for easy installation
I bought it along with the DAYTONA Engine protector
The accent of the front undercarriage and a little bit of customization
It's very easy to install, but you'll need two 5mm Hexagonal Wrenches
Quantity:Pair (for Left and Right) (For co-tightening)
I don't know how effective it is If possible, even if you don't want to be a part of it
There is
In the image on the ManufacturerHP, the base plate is probably the Champagne Gold?
However, the current version is called StayGold, which is more of a gold color
View detail
Engine slider and Quantity:Set
Purchased at the same time as the Engine slider from the same KFACTORY
As a precautionary measure of insurance, the Engine slider and Quantity:I installed it in the set, so it looks better and I like the appearance of Parenthesis
View detail
Preparedness in case of emergency
The engine slider is also from K-FACTORY, and the Axle Slider as well I installed K-FACTORY, and I am satisfied with Large change There was another person's impresario, but I feel that I should not have it, but it is a preparation for emergencies Isn't it?
Also, I was able to successfully install it on the '20s, even with the '13 and up counterparts
Unfortunately, there was a scratch on the part that supports the DURACON Please improve the details
I reduced the quality and texture by two stars in that area 。
View detail
Fits: HONDA CB1300 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA X-4
Five stars!
It's easy to install, looks great, cosy, Total 5 stars In fact, I haven't pedaled yet, but it's a precaution before I fall But it's Front, so how does it look? View detail
That seems a bit high to me
I put it on in case it happens, but I'm not sure how useful it will be I'm hoping that I'll be able to remain unaware of this The price is a little too high for what it is, but the appearance is not so luxurious It doesn't look very expensive View detail
Fits: HONDA CB400SF Revo, HONDA CB400Super BOLDOR Revo, HONDA CB400SF VTEC
It bothers me
2014, 400 BOLDOR (NC42) It is
If you have a 24mm Wrench prepared in advance, it can be installed in no time
I decided that the gold insert color would go with the disc Well … it's fine, but I guess I want to yabby! (Lol)
I guess you can think of it as insurance
View detail
Fits: HONDA CB1300 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA X-4
front axle sliders
the installation is very simple and very fast. The product is very light and does not bear a large load on the total mass of the motorcycle. After installation, the external appearance has become more elegant, the front fork looks like a whole and finished product. I believe that for this product the price from the manufacturer could be a little lower. the installation is very simple and very fast. The product is very light and does not carry a heavy load for the total mass of the motorcycle. After installation, the appearance has become more elegant, the front fork looks like a single and complete product. I believe that the price from the manufacturer could be a little lower. translated by Google Translator View detail
Fits: KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZRX1200, KAWASAKI ZRX1100
Large, weird
Cost was inexpensive and the packaging was good!
At one point, Large is the odd one out satisfaction!
The quick response was good
I still want more detailed parts
View detail
Fits: YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA XSR900
sounding good
I installed it for the Circuit run I installed it on my TRACER 900GT with no problem It's not as per the Instruction Manual, but the installation has no rattling and is secure We could have installed it View detail
Fits: SUZUKI BANDIT1200, SUZUKI BANDIT1200S, SUZUKI GS1200SS
Casual Accent
I think it's a moderate Accent
I thought about painting the base plate in silver, but I didn't
Rotor was also gold
I think the color was just right
View detail
it's beautiful
As a matter of fact, there is a problem with the Product Contents when installing
When I contacted the manufacturer, they responded in a large and courteous manner
I had the missing parts sent to me the same day
It's completely different from the response of some Manufacturer, and it understands the User's feelings Manufacturer!
The makers are great, the sellers are great, the people are great!
I wish you could learn from them, Fatty
View detail
Become OHLINS!
Gold on the base plate suits the OHLINS Fork and luxury up.
Normal fork, it can also be mounted on SPL OHLINS.
View detail