Reviews
Defective Reflector
The M6 Screw is bent and the Nut will not fit again. We fixed it by setting up the Tap again. View detail
Is the Reflector Bracket a little long?
The Fender Eliminator Kit itself is of good and stable quality, as it has been used in my previous cars, but this time, the Motorcycle is a MONKEY125 with a License Plate.
I am considering to cut the bracket a little and weld it, but the welded part will pick up vibration.
I'm thinking about it because I'm worried that it might break! If possible, it would be nice if the lineup could include one with a bracket that matches the size of the 125cc Nan Bar.
View detail
Easy installation
Attach with a strong double-sided tape like that used in ActionCam.
This makes it difficult to adjust the position, but there is no danger of losing it while driving.
View detail
![ตัวสะท้อนแสง MINI S 4-RED [CH4R]](https://imgwebikenet-afcc.kxcdn.com/catalogue/images/36685/8F8DAC30-B452-42E8-9848-E7A978CC5B02_TS.jpg)
ナンバープレートなどを夜間に反射する場所に取り付けるために使用されます。そして、それはすべての車に適していると思います。そして簡単な取り付け手を置いてください。可愛い小物です。そしてパッケージも綺麗で気に入りました View detail
Plating section is Material:Plastic and cheap….
[How is it used?
I bought it to put a reflector next to the headlight to make it look like an old car.
Was the one you received as per Image?
The base part of the plating is made of Material:The large size is about 50mm in diameter, which I think is a good size.
Was the installation difficult?
The M6 Screw was long, so we cut 5mm off and used it.
How was your experience with it?
I am glad I purchased it because it gives off a cheap but good atmosphere.
Durability will be verified in the future.
[Included Parts:were they on?
Rubber cushion for fork mounting is included.
[Was there anything that disappointed you?
Plating part is Material:Plastic and cheap point. (It is actually cheap, but …)
Reproduct such as ▼BRC seems to be a little small in large size, but the foundation is Material:It seems to be Aluminum, so it is difficult to obtain the OEM equivalent.
View detail
Probably the Slimmest Reflector
[How is it used?
The Fender Eliminator Kit did not come with a reflector, so I bought this one.
Was the one you received as per Image?
Very good as per Image.
How was your experience with it?
It is very slim and matches SS Motorcycle quite well.
[Points to note]
May interfere with License Plate.
How did it compare to other products?
I think Active's Reflector is probably the most Refreshing of any Manufacturer.
View detail
![Universal LED Light [Reflector Size]](https://img.webike-cdn.net/catalogue/14762/07292206_51f668cc0718a_TS.jpg)
Very bright; good for additional brake light
I am on a mission to increase my visibilty to others while riding, and i want to do it in style. This koso led light (red) is very bright at night and good in daytime as well. This product is mounted with 3m double tape and there is no screws. I used it on posh reflector bracket. View detail
Universal and fit my bike with license plate
I purchased this bracket to use with koso universal led light. Fortunately the light fits perfectly. I also tested other reflectors on it, also fits nicely. The build quality is good and sturdy; i think this product will last forever. The paint is also good quality, i tried to scratch it but the paint wont come off. I installed this together with a daytona fender eliminator. View detail
Satisfied
Simultaneously replaced when ActiveFender Eliminator is installed.
I wanted a Slim Reflector and it turned out exactly as I wanted.
View detail
Moderately
The threaded part is wobbly and not of very good quality.
I can't complain because of the low price, but it is not something I would confidently recommend to others.
View detail
To make it a Japanese Vehicle Inspection Correspondence
This product is required to make Japanese Vehicle Inspection Correspondence when the side number is set. View detail
Small size, so it can be put anywhere.
The reflector for the DAYTONA-made License PlateFrame had somehow flown away, so we have attached this one in its place.
MONKEY has a built-in reflector in the Tail Lamp, so it is not necessary in the first place, but it is nice to have.
It has a cheap feeling, but for those who are not particular about it and want it anyway because it would be illegal without it, it is good because it is small, so it is not difficult to find a place to install it, it can be detached, and it has a Tape.
View detail
Fits: Others Medium size car and over (126cc-)
I was looking for something inconspicuous and well
It does not protrude from the License Plate and the bottom part is held in place by claws with no jiggle. The entire surface is black and the backside reflecting and the angle of the reflector is fine.
However, the price is a bit expensive.
View detail
Better quality than OEM, and of course, more room for inspection.
The foundation bracket is made by Active (adapted from Type -1 Square).
With Bracket Reflector products from various companies. There is no product with a reflector of about 35x90mm." I combined the brackets by myself. As I had hoped, I was able to install this product of 35x90mm with Type -1 Bracket almost Exactly.
Stylish slim type is not bad, but I personally like this one because it is more assertive. OEM-like Size." I like the Red color, which is slightly darker than the OEM, and the Base is solid and highly textured.
Point also has less rounded corners than those made by KITACO.
In the past, when I tried to pass a vehicle inspection with Slim type, they measured the area, but of course, this product does not do that.
It is also quite durable and the Lens has not fallen off after 5 years of exposure to VTWIN vibration.
It is a modest but good Parts.
View detail
Reflector
Easy to install, it is co-mounted on the License Plate.
Size is a little large for Reflector, but balance is good.
View detail
I guess this is the shape I'm personally looking for.
Installation is done by co-tightening with Number. I personally chose the most comfortable shape. It is also cosmetically good, and even if it fails, it will not be a problem. Oh, well. I think the price is good. View detail
Required to make Fender Eliminator
I purchased this because I needed a reflector when converting to Fender Eliminator.
Installation is co-tightened with the License Plate.
Three shapes (Square, Trapezoid, Slim)
Two colors (Black, Silver)
so you can choose the one that fits your Motorcycle.
Also, note that SmallEngine Displacement Volume (125cc or less) reflector kits have different dimensions between the holes, so be careful when buying them.
View detail
Installation complete
I installed it in conjunction with the conversion of 883n to Side number.
I am satisfied with the large size.
I am a little concerned about the durability of double-sided tape.
View detail
For EXC-F public road driving
I bought it at a Dealer, but when I brought it in for inspection, it did not have a License Plate Light and Reflector, so I installed them to avoid being caught.
Since it is a 15 year old model, there are no angle restrictions, but we have a 45 degree one.
Installation is easy, but it is a pity that it interferes with the KTM License Plate, so it can no longer be used.
Now I just hope it doesn't break and lose it due to vibration.
View detail
Easy installation
Just tighten it together with the License Plate.
Easy to install, very nice!
View detail