Reviews
Fits: HONDA CB500X, YAMAHA MT-09 To Racer, KAWASAKI ZX-25R, HONDA NC750X, HONDA NC700X, HONDA CRF250 RALLY, HONDA CRF1000L Africa Twin, HONDA 400X
For use with Z400
[How is it used?
ZETA is used for Z400. I could have used another company's product, but I decided to use ZETA because it is a manufacturer that I used to use when I owned MOTARD and Off-road vehicles.
Was the one you received as per Image?
Anodized as per image (Red) coloration.
Was the installation difficult?
Easy to use, even a novice mechanic can do it with a hex wrench of the right size.
Curing tape around the Cowl mounting holes is perfect.
Be careful not to overtighten.
How was your experience with it?
1mm shorter than OEMBolt, but no problem.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
[Makeup Bolt diversion hang
If the Parts List is available online, you may be able to find the dimensions of the OEM Bolt first.
The best way to be sure is to remove the Bolt and measure it, then order it.
View detail
It was good
I bought it to change it while I was changing my Screen.
The texture is good, and I bought Black, but I think my face has tightened up and my parenthesis has improved!
View detail
Fits: HONDA CB500X, YAMAHA MT-09 To Racer, KAWASAKI ZX-25R, HONDA NC750X, HONDA CRF1000L Africa Twin, HONDA NC700X, HONDA CRF250 RALLY, HONDA 400X
Unified in Black
Since Smoke Screen was installed on Black body, Bolt was also changed to Black!
It makes you look more toned!
View detail
Gorgeous
It is easy to install. It is quick and easy to customize. I am riding a BlackGold ZrX1200 DAEG and the Gold Bolt seems to be darker in color. View detail
Used in 2019 Ninja 1000Screen
The price is expensive, but the quality is good.
When I replaced the Screen, I installed it, but the Washer of the scratch prevention
It's also good to have
Anodized clean and good in One point.
View detail
Self-fulfilling 300%.
What made you decide to buy?
Puch:I bought and installed it in order to put color around the Screen by having replaced it with Racing Screen.
How was your experience with it?
It does not improve the performance by installing it. It's just a self-satisfaction (laugh)
I did a lot of research before replacing it and found that the OEM size is 20mm while the Speedra is 16mm, but there was no problem. Also, Speed La's Washer became Polycarbonate and slightly larger than OEM, but it fit nicely in the place where it is installed in the Cowl. The size of the hexagonal tool will also change, OEM will be Size4, Speed La will be Size3.
View detail
Dress-up
I bought this for dress-up and weight saving purposes. View detail
Fits: HONDA CB500X, YAMAHA MT-09 To Racer, KAWASAKI ZX-25R, HONDA NC750X, HONDA NC700X, HONDA CRF250 RALLY, HONDA CRF1000L Africa Twin, HONDA 400X
To Bolt on the exterior of my 16/390 DUKE!
I bought this product because the exterior of my 16/390DUKE has + screws that are not centered and lick easily. I'm happy with it because it makes for better serviceability and most importantly it's cool! View detail
Great style!
[How is it used?
OEM to replacement!
Was the one you received as per Image?
Almost as good as Image, lighter weight than I imagined!
Was the installation difficult?
Just pull it out and plug it in, it's that easy.
How was your experience with it?
The texture is good and the effect is outstanding!
[Included Parts:were they on?
Resin Spacer only
[Was there anything that disappointed you?
I think the price is a little high.
Other items that would be helpful
I like it a lot, but I thought it could come with a well nut. I used the OEM one. I used OEM one of course....
View detail
Good texture but poor cosmetic
The OEM Bolt for Cowl was cheap and the color looked floaty, so I replaced it.
The product name is Screen bolt, but it can be used for Cowl of Kawasaki car.
The size of Hex is different from OEM, so it may be troublesome to use more tools.
The texture is good, and I was able to unify the color with Cowl, which gave the body a sense of luxury.
It's a Cut-out and elaborate process, so it can't be helped, but I felt the cosmetics were bad.
View detail
Good texture but poor cosmetic
I replaced the OEM Screen bolt because it was cheap and the color was too bright.
The size of Hex is different from OEM, so it may be troublesome to use more tools.
The texture is good, and although it is SmallParts, the Image around the Screen has become good.
It's a Cut-out and elaborate process, so it can't be helped, but I felt the cosmetics were bad.
View detail
Fits: HONDA CB500X, YAMAHA MT-09 To Racer, KAWASAKI ZX-25R, HONDA NC750X, HONDA CRF1000L Africa Twin, HONDA NC700X, HONDA CRF250 RALLY, HONDA 400X
It's self-fulfilling.
Previously.
I used ZETA Parts a lot on my WR250X, so I thought I would use them on my ZX-25R.
One point self-satisfaction Fashion, I say …lol
View detail
Fits: HONDA CB500X, YAMAHA MT-09 To Racer, KAWASAKI ZX-25R, HONDA NC750X, HONDA NC700X, HONDA CRF250 RALLY, HONDA CRF1000L Africa Twin, HONDA 400X
The OEM broke, so I went with this.
I was wiping the ScreenReverse side and suddenly Material:All four PlasticOEMBolts broke off at the base of the head.The Motorcycle is a 2015, so it only lasted about 6 years.
I was actually going to replace the OEM Bolt, but since this product is made by Gold, I thought it would be better than the OEM. There were some comments about accuracy, but in my case, it went in smoothly without any problems. I think it looks better, but I thought this price was a little high for 4 bolts.
View detail
Fits: HONDA CB500X, YAMAHA MT-09 To Racer, KAWASAKI ZX-25R, HONDA NC750X, HONDA NC700X, HONDA CRF250 RALLY, HONDA CRF1000L Africa Twin, HONDA 400X
Diameter is Small
I bought this for my CRF250RallyScreen Bolt.
I managed to get it installed.
I felt that the diameter of Bolt was a little too small.
The external diameter was about 1?Smaller than the existing one.
In terms of tightening to the Screen, the pressure seems to be applied to one point and I am worried about cracking.
I use a Plastic Washer with a slightly larger size to distribute the pressure.
View detail
Fits: HONDA CB500X, YAMAHA MT-09 To Racer, KAWASAKI ZX-25R, HONDA NC750X, HONDA NC700X, HONDA CRF250 RALLY, HONDA CRF1000L Africa Twin, HONDA 400X
Screen bolts
Ordered the item for CRF250Rally. Colour RED. Quality is fantastic. Fitment is perfect. Installation work is easy. Highly recommended item. View detail
The tastelessness of the place has become fashionable.
I've been looking for a new model of aluminum cut-out screen bolt, which I purchased the other day, YOSHIMURA YOSHIMURA:Indoor Roller NK. The color is not flashy, but Titaniumium color. It's a self-satisfied world. View detail
It's beautiful.
The screen is changed, but I bought Bolt because the color difference was conspicuous in the same way as OEM.
Installation is simply a matter of replacing it with a hexagon.
It's more expensive, but it's better looking.
It's well built and beautiful.
View detail
It changes dramatically.
The color of the screen bolts changes the look and feel of the product. I would like to change the color of the bolts when I get bored. View detail
Fits: その他
Easy to replace
The combination of Screen's Black and Gold makes it look custom and high-class, and the paint of the Bolt is also beautiful. View detail
Fits: KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-10R, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI ZX-6R
Looks Parenthesis well!
Screen [Color] I'm switching to Smoke's stuff, so it's floating around with the OEM SilverBolt I replaced it with a Black Bolt
I like the fact that the included Washer is not visible from the Bolt
A 4mm hexagon is required for removal and a 3mm hexagon is required for installation
I honestly think $4,000 for 6 bolts is a lot of money, but it's not a consumable product and looks much better It's better, so that's good
View detail