Reviews
Fits: Others , HONDA MONKEY125, HONDA CL250, YAMAHA XSR125
Fat Type Cable Adjuster
About quality and texture - Excellent quality, went away from the OEM zinc plated one to this lovely black andised one. About the feeling of use - Works really well, nice smooth operation when clutch cable adjustments are required. Products to buy together - If you are looking for more bling the SP Takegawa main switch cover is nice to complement this part, product # 05-09-0046. Difficulty of installation - Easy installation but does also require a clutch cable adjustment afterward. Cost performance and comparison with other products - Good value for money buy here and looks to be priced a little cheaper then the other brands. About shipping and packaging - Cheap and fast, arrived in a week and had plently of protection from the air pillows. Any concerns, cautions, or advice when purchasing - If you can not decide one which colour you prefer buy them all and swap them up ever now and then. View detail
Good quality, perfectly fitted
This multi purpose bar can be perfectly installed in place. The installation if the bar is not complicated, the tricky part is the speed metre has to be loosen in order to make space for loosening and tighten the four bolts of the handlebar. It may take quite some time uninstalling the speed metre, but installing the bar takes less than five minutes. The quality of the bar is excellent, you know it by its weight. Surely, it can carry more than 1.5kg. View detail
There are times when you want to take your hands off Right.
This product can lock Axel.
Since the opening degree of Axel is fixed, the speed will change on a slope.
I think it's a little different to assume Cruise Control-like usage.
It's certainly easy to use on the highway. But you need to adjust it delicately and it doesn't mean that it is fixed for sure.
What really makes these Items useful is that you can take your hands off the Right hand when it gets tired.
How much easier would it be to just do this?
I've always liked and used it because AxelAssist can't do it.
View detail
Fits: YAMAHA TZR50, HONDA NSR250, YAMAHA XJR400, YAMAHA RZ50, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, HONDA NSR50, HONDA CB400SF, HONDA NS-1
Installed on Type 3 Grom
Replaced together with Clutch lever replacement.
It looks like a Large for the Type 3 Grom.
Rubber gap in Riding position
The "Nut" is visible from the left side of the image.
We'll see how the color fades and how durable it is.
At that time, there are many colors to change the combination.
And I thought it was a good Accent.
(I consider it expendable, so I'll take a spare.)
View detail
It's good to have a Replace product.
Isn't it often the case that the Mount part is damaged when you are attacking?
I very often fall over and get crazy with the whole Screw hole.
I have no idea what kind of force is applied to damage such a part, because I am not an expert, but I would like to know why it happens when I go to the forest road, when it does not happen when I fall down.
In some cases, the hand guard itself may be distorted.
I didn't know such a hard thing could be bent…!
I think it's very economical to be able to replace these Parts units.
As a matter of course, make sure to check the fitting before installation.
View detail
SPTakegawa Handlebar Guard
The manufacturing accuracy, packaging, and installation instruction manual are all excellent.
I installed it for the installation of GARMIN HandyGPS, but
It's working as intended.
View detail
EDR-21G for Switch
I used it to install the Switch on my EDR-21G.
It's working fine
View detail
for Repair.
It was a little large, so I had to cut it down. View detail
Tycho.
A must-have for Wire adjustments. It is always prepared for Trouble in the destination. View detail
For Repair on the go.
I keep it on hand in case I run out of Wire on the road. View detail
For Wire Adjustment.
I used Locktite on the screw and filled the hole with Iron Pate. I can use it without any problem. View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA CT125
expansion bar
It is a convenient bar to attach a Smartphone Holder and various items to a Drink holder. View detail
Nice little additions available from SP Takegawa
When I am able to find nice little additions for my Honda Monkey 125 I really enjoy swapping out the OEM Honda parts. Most of these parts perform the same as the OEM Honda parts however the material they are made from and surface finish they receive are always better and give the motorcycle more of a premium feels. Made from aluminium has an anodised finsh and priced just right. When I originally installed this black fat type clutch cable adjuster the Special Parts Takegawa logo was not in a position that could been seen so I had to use a washer to make this adjustment. Very happy with this part and all my other parts from Special Parts Takegawa. View detail
Used for Millibar conversion of XL1200C SPORTSTER 1200
I used it for the Millibar conversion of XL1200C SPORTSTER 1200. Unlike other products, it has a stopper and Handlebar does not move even if I put power into it. View detail
Fits: HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR
Simple and good.
I bought it because I thought it would be easy and simple to put on afterwards.
The edge where it meets the Handlebar is not beveled.
If the Handlebar is attached to a part that has a slight bend in its shape, the painted surface will be scratched.
I think the material is Duralumin, please pay attention to the tightness of the screw.
The mounting holes for the attachment bar are long holes, so you can't expect the rigidity you need for off-road driving.
If you put your weight on the Handlebar while standing, it will move slightly.
I also raised a Review of the Attachment Bar, and it was strong enough to hold up to a windshield.
It's a 125cc, so it will be checked up to 60km.
View detail
Fits: HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR
Note the dimensions
I wanted to add a windshield, so I replaced it with a MINITrail Cross Bar.
The shaft length you select when ordering is the length between the shaft holes.
The product is sturdy and simple, but I would like you to make it easy to understand.
I bought the 200mm, made a mistake, and bought the 250mm again.
In addition, with a nominal length of 250mm, the thickness of the φ22.2 part is 200mm.
I used their Clamp set for Attachment Cross Bar to attach it.
Even with the windshield, there were no strength issues.
It`s a 125 so I`ve only tried it up to 60km/h.
It comes in many colors and is easy to match with Motorcycle.
View detail
It's easier to see.
D I put it on the Tracker 125, Mirror has changed it.
Since Mirror can be moved outward by 5cm, Quantity:Pair (for Left and Right) Both of them became very easy to see.
View detail
It's glossy so it suits you better.
Unlike the Daytona products I've used on my car before, it's glossy, so it feels more suited to my car.
To install, loosen the two top bridge bolts and insert the product above. Long bolts are also included.
I have an sp connect mount. We plan to add an action cam as well. ------------------------------------------------------------ -------- It is a feeling that is better suited to vehicles, which is different from the Datona products that I wrote in the vehicle before, and it is better to fit into the vehicle. Long bolts are also enclosed.
I put SP CONNECT mount. The action cam will also be added. Powered by Google Translator
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
I changed Nut to Lock nut.
Because the part of the half screw becomes the shaft of Clutch holder and Lever, it is not possible to substitute a normal half screw. But Nut is loose. If it is tightened strongly, the Clutch holder becomes narrow and the movement of Lever becomes reluctant, and if it is tightened loosely, Bolt comes out every time of Clutch operation. I changed Nut to Lock nut. View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX
It's working for now.
It is used with Base of Smartphone Holder.
It's been a short time since I installed it, so I don't know about rust or other problems with the Others.
View detail