Reviews
It is functional and improves the appearance
I had it installed at the same time as AKRAPOVIC's Slip-on Silencer using Webbig's Pit-in-Service. The mounting angle is adjustable, so the direction of the heat blockage can be adjusted somewhat. The functionality is good, but the appearance is also different by a large margin. View detail
Fits: SUZUKI GSX-R1000R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000R
YOSHIMURA is the best!
I installed this on my 2019 GSXR1000R. 2017 has a NORMAL Heat Guard, but mine didn't, so I installed it at the same time I bought the Exhaust System. I bought it at the same time as YOSHIMURASlip-on Silencer, but I wish it was included in the Exhaust System. It looks great and Parenthesis is great! View detail
AKRAPOVIC Heat shield
The AKRAPOVIC Racing Line Full Exhaust System is a must have. Of course, the heat shield effect is also perfect. It is a little expensive, but I am very satisfied with it. View detail
countermeasure against standing up
Installation is easy
I expect that Damage at the time of the fall will be limited to the smallest limit.
View detail
Fits: TRIUMPH Speed Triple, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XT660R, YAMAHA Tenere 700 Rally, TRIUMPH Speed Triple S, TRIUMPH Speed Triple R, SUZUKI SV650 Unfaired, SUZUKI SV650 Unfaired, SUZUKI SV650X, SUZUKI SV650 Unfaired, KTM 890 Duke R, KTM 690 Duke R, KTM 690 Duke IIII, KAWASAKI Z1000, KTM 1290 Super Duke R, HONDA Crossrunner, BMW S1000RR, BMW HP4, BMW S1000R
Good r&g Product
R&g product is very good material and perfectly to fit my akrapovic exhaust. Function good will buy r&g product again in the future. View detail
Lighter weight due to carbonization (can also be installed in 24-year model)
The 24 model ZX-6R has no major differences from the 23 model in terms of front face, meter changes, and compliance with gas emission regulations, and even when comparing videos and images, I felt that there were few changes in the others. I asked Kawasaki plaza to install the coating with the car delivered to me for maintenance.
As a result, they were able to install it without any modification.
NORMAL is made of Gold genus, so Material:Carbon will be used to reduce weight.
I thought it was well thought out with the heat shield tape attached to the reverse side of the product.
Fitting is good with no interference with Exhaust System or Cowl.
View detail
Fitted to protect a stock exhaust.
I took a risk & chose the Standard length intermodal model (120mm) to protect my stock exhaust. It seems to offer enough clearance in the event of a tip over. I just hope I never find out for certain. In my opinion this is the best looking out of the silencer sliders available for the z900rs, hence partly why I chose it. View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, SUZUKI GSR750, SUZUKI GSX-S750, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja ZX-25R, HONDA CBR250RR, YAMAHA XMAX
For Dress-up
Slip-on silencers for the CBR250RR often have a long middle pipe, which is not so good when viewed from the side, but this will make it look cool. The same type of silencer can be found at Jungle for about half the price, but I don't want to put a pirate version on my motorcycle. So, I bought YOSHIMURA genuine products. I think it is good for dress-up, but I think it is also universal because it is only tightened with a 1cm wide Gold Belt. View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
Advanced heating guard
I purchased the GP-Magnum and thought it would be better to use a genuine heating guard, so I bought it even though it was a bit expensive. I am satisfied with the sense of unity and quality. However, I installed it as shown in the product photo, but when my calf touched the gap between the muffler and the flue, it was very hot. . So I reinstalled it to prevent the seams from opening up, and it's a little better. It's hotter than I expected, so I'll definitely have to wear a heating guard. View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
It goes well with the carbon colored Magnum muffler.
The original muffler had a guard, so there was no need to worry about burns. However, after installing the carbon-colored Magnum muffler, I couldn't help but worry about getting burned if I just rode it without a carbon heat guard. After purchasing and installing it, it matched very well with the carbon-colored Magnum muffler. It was as if it came as a single product. .The heat blocking function is also excellent. I recommend it. -------------------------------------------------- -------- There was a guard in the genuine muffler, so I didn't have to worry about burns. But when I was equipped with a carbon -colored Magnum muffler, I couldn't worry about burning without a carbon hit guard. The heat breaking function is also excellent. I recommend it. Powered by Google Translator View detail
The best item to protect your muffler
In Korea, full exhaust muffler structure changes are no longer possible.
As a result, the 4-shot muffler of my cb1100ex became rare.
This is the only item that can protect an expensive muffler in case of a fall.
The product photo looks like rubber, but it's made of hard aluminum so it doesn't break easily. -------------------------------------------------- -------- In Korea, it is not possible to change the full exhaust muffler structure. As a result, the four -foot mufflers of my CB1100EX have a scarcity. It is the only item that can protect expensive mufflers in all cities. The product photo came out like a rubber, but it is hard aluminum, so it doesn't break easily. Powered by Google Translator
View detail
Fits: KTM 690 SMC-R, KTM 690 Enduro
Carbon
[How is it used?
Mainly Touring
Was the one you received as per Image?
YES
Was the installation difficult?
Easy!
How was your experience with it?
Better looking.
[Included Parts:were they on?
It is not.
[Was there anything that disappointed you?
No, sir!
View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
Carbon heat guard
I like it very much. It’s clean and you should know about Yoshimura’s quality!! Very satisfied!! I was skeptical because it was delivered from Japan, but the delivery was fast and the packaging was neat. We Bike is the best. It matches perfectly with the Yoshimura muffler I bought together. The fitting is also accurate and I am very satisfied ----------------- ----------------------------------------- I really like it. You have to know the quality of Yoshimura! I was half-hearted because it was shipped in Japan, but the delivery is fast and the packaging is clean. Powered by Google Translator View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
Performance is good
I think it is a necessary product in terms of design, but it also has excellent performance. I think the Magnum muffler is like that. The muffler end body is a bit hot, and the middle connection part is more hot. This is a must-have item if you are thinking about tuning your Magnum. Don't burn your legs ---------------------------------------------- ------------ I think it's a product that I need in terms of design, but it's also excellent. Magnum muffler seems to be like that. The muffler end body is a bit more open and the heat of the intermediate connection area is even greater. It is essential if you are planning to tune Magnum. There is no image of legs Powered by Google Translator View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-03
Outstandingly cool.
Seriously cool ?? texture is good! View detail
Fits: SUZUKI GSX-R1000R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000R
Great Price; Timely Shipping
I ordered this part at a considerably lower price than I would have otherwise paid in New Zealand. I also wanted to get it in time to fit to the bike I was purchasing before taking delivery. The part arrived in around 10 days using the second cheapest shipping option; it would have taken around 4 weeks otherwise. The item was very well packed and arrived in great condition. I am very happy with the heat shield; it completes the look of the bike. Thank you very much. View detail
Good quality and fit
Item arrived in a well seal packaging. Workman ship for carbon fiber is very good. The holes aligned correctly. The mounting clamp has to position correctly to prevent twisting of the final installation. View detail
Exhaust pipe protection
I installed it to protect the exhaust pipe of SEROW250 and to dissipate the heat.
The material is aluminum, so it can be bent and adjusted.
I am a little worried about the durability of the hose band since it is fixed with a hose band, but I will be observing its durability.
The coloring of Aluminum is also very Gun meta-like and austere.
View detail
High satisfaction
It is already just for looks, but the quality is high and I am very satisfied with it.
Look at it and grin.
Installation is also super easy.
View detail
The firing is exquisite!
Expensive, I want to protect my Full Exhaust System! Items that smother the parent's heart.
In the case of MORIWAKIMONSTER S2, I had given up on installing other manufacturers' sliders because they did not have the clearance of the neck. I like the design and the fact that it is reflexing and does not stand out.
View detail