Reviews
Baffle replacement for OEM exhaust system with R-EVOTitaniumium silencer from beams
I purchased a new OEM exhaust system from beams R-EVOTitaniumium silencer, but the volume was not enough, so I replaced it with this Semi-racing baffle, and the size fits perfectly!
The sound quality is a little lower than with the Baffle, and it is not too quiet and not too loud, but just right.
View detail
Volume control
[How is it used?
The volume of the external exhaust system that came with the used car when I bought it was too loud,
After Fire was also available at the same time, so it was purchased for exhaust adjustment purposes.
Was the one you received as per Image?
The size error was very small, and it was possible to mount the unit on a pontoon.
However, in our case, it will be installed in the exhaust pipe side of the exhaust system,
Drilling + Rivet fixation.
Was the installation difficult?
In the case of our vehicle, the exhaust system was inserted into the exhaust pipe,
The fact that we could not bolt on was something we could have anticipated,
Also, I had all the necessary tools on hand for processing,
It wasn't a difficult task.
We have an O2 sensor attached to the exhaust pipe on our vehicle,
It was also necessary to machine the contact points with a hole saw.
How was your experience with it?
I was able to reduce the volume from the original explosions,
For starting up (when cold), the volume is still too loud to be noticed in residential areas,
Once the Engine is started, it is ready to go.
[Included Parts:were they on?
Quantity:I bought 2pcs, but one of them had a bolt nut that came off,
It was playing in the bag.
However, it is not visible once it is installed,
I'm not talking about the scratches.
[Was there anything that disappointed you?
none in particular
Other items that would be helpful
At the very least, measure the inside diameter of the piping at the planned installation location before purchasing.
For those who intend to install the product by themselves, some manufacturing errors should also be taken into account,
It is advisable to have some processing tools and liquid gas available.
View detail
for Replacement
I purchased a SS400SMB baffle to make it larger in diameter, but it was the same size as the original baffle.
I will divert it to other Motorcycle
View detail
Exhaust pressure adjustment
cbr250rr mc51 AKRAPOVICExhaust System
cbr250r mc41 WR'sExhaust System
mounted on
AKRAPOVIC can also ensure exhaust pressure, and the volume is lowered just right.
WR's are too subtle with too much exhaust pressure. Volume goes down.
Glass Wool burns quickly, so it is a recommendation to wrap Stain Wool on top of the purchased condition.
Since the exclusive for RepairGlass Wool is expensive at 1,000 yen, commercially available for RepairGlass Wool with Stainless needle Gold is sufficient.
By the way, if you open your fingernail so much that it is too hard to insert it, if you open the Axel all the way, you can….
View detail
having an effect
Used for MV83 470mm.
The bombing sound has been softened and my head no longer hurts.
However, the volume is on the large side compared to Earls Gear's Japanese Vehicle Inspection Correspondence Slip-on Silencer.
It became moderately loud and fun to ride.
Sound quality is good, appearance is not spoiled, and I think the price is a little high.
View detail
Fits: その他
This
I have purchased several items and this is my favorite sound quality volume. View detail
Fits: その他
bike-race (betting) ticket
The volume was louder than expected, but the sound quality is not bad. However, the sound quality is not bad. View detail
To reduce volume
I have an AKRAPOVIC Silencer on my car, but I think it is too loud and I would be stopped by the police if I were to ride on the street.
I was looking for a variety of baffles, but AKRAPOVIC's Silencer has a special outlet shape, so I could not use a common universal baffle at all, and I had to use an OEM baffle. But since I bought AKRAPOVIC for the first time, I didn't know much about models and models, so I looked for a baffle that fits with the shape of the Silencer, and ended up buying a different product.
The appearance is the same, but the exit size is different depending on the car model, so the one for S1000RR cannot be inserted here. This was indeed a lack of confirmation on my part.
Please take note of this if you are considering AKRAPOVIC's Baffle.
There are subtle differences, so if you get it wrong, you won't be able to install it.
View detail
Fits: KAWASAKI Z 650, KAWASAKI Ninja 650, HONDA CBR650 R, HONDA CBR650 F, HONDA CBR500 R, HONDA CB650 R, HONDA CB650 F, HONDA CB500 F
ArrowBaffle
The volume is not too large, not too small, and the sound is thick. View detail
Effectiveness is good, glad I bought it.
[How is it used?
Exhaust System of Z900RS was replaced and Silencer was Bullet Silencer by K-FACTORY.
The kit came with two baffles, one for the outlet and one for the inlet, and the combination of the two was supposed to allow adjustment of volume and exhaust pressure.
When the outlet type was installed, it sounded like a large dump exhaust system and I could not bring myself to use it. The exhaust resistance of the inlet type was too large and the volume went down a little, but at mid-speed or higher, the exhaust clogged and the large width performance went down.
So, I thought there must be a way to lower the volume while maintaining a reasonable exhaust resistance, so I used this product.
Was the one you received as per Image?
As per Image as I had seen the actual product at the store.
Was the installation difficult?
There is no difficulty if you choose a Size that fits within the inside diameter of Silencer.
However, the Silencer exit diameter is 55Φ for use with Bullet Silencer,
The inside of the punching pipe had to be 45Φ so it was necessary to fill the 10mm gap at the exit.
I looked for a gasket that would fit, but could not find one, so I wrapped a heat-resistant aluminum tape around it.
Also, the Silencer fixing bolt that came with the kit was a retro black ordinary Hexagon bolt, so I used a silver cap bolt that I had on hand.
How was your experience with it?
The volume did not go down as much as I had hoped, but at the moment of startup without any Absolutely not!" The explosion was so loud that it felt like "I know it's annoying, but can you forgive Limit?" This was the Level that
Unlike the Silencer-attached baffle, the Straight structure is maintained, so exhaust resistance is not increased excessively, and the sound quality is not muddy and high-frequency components seem to be suppressed.
In terms of performance, it is not too much at low speeds, but it is not too much at high rpm, and it is not too much at high rpm.
However, the Bullet Silencer, which I almost gave up using because it was too noisy even though I like the look of Large, is now available, and the Silencer is also black and retractable, so it is unobtrusive and I am glad I purchased it.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
It would have been nice if the volume could have been a little lower, but then it would have been a poof clogging.
Once again, I felt that the OEM Exhaust System is well made.
View detail
Safe & Perfect fit?
CB400SF (2014 model) I have a BEAMS Slip-on Silencer on the
I am 100% satisfied with the Exhaust System, but in the early hours of the morning.
I was curious … this time Semi-racing baffle Purchase
The effect is now ◎Normal muffler (Lol)
Of course, it is SizeSetc.Exactly.
It is safe to use
View detail
You can feel the effect when you replace it.
Standard Equipment's Standard baffle is almost as loud as the OEM exhaust system when starting the engine or idling, and you can hear the engine well. The volume is a little louder than the OEM exhaust system, so I don't feel any inferiority when I use it for work. In fact, it is so easy to use that I can open Axel in town without any stress.
I would like to have this Semi-racing baffle because I think it will increase the volume and I can enjoy it on the mountain pass, etc. However, the SS300Silencer for LITTLE CUB is φ89.1mm and this Semi-racing baffle is for MONKEYφ90mm. I was not sure if I can use this Semi-racing baffle because it is for MONKEY& phi;90mm Spec. "Not installed on LITTLE CUB." I was a little hesitant because the answer was "I don't know.
Well, the price is not too high, so I bought it on a no-brainer, installed it, and it fits EXACTLY. It is Tight enough to pull out and insert, so I can use it with Bolt1 pc and Standard baffle. (This may be an individual difference. Not all products may fit.)
The effect, first of all, is the sound. The sound quality is very good as well as the volume. The sound is so energetic that it is hard to believe it is a moped. It is very pleasant. I think the volume is about the limit of what is acceptable in town.
And the engine rpm is smoother, especially at high rpm. The engine turns more smoothly, especially at high rpm, and the standard baffle feels a little sluggish, but the Semi-racing baffle reduces stress. It is a recommendation.
(Good children should never run without a Baffle.)
View detail
For Touring with Income
I usually run without Baffle, but when I use Income for touring, I sometimes have difficulty hearing the Exhaust System sound, so I use it only when I use Income. View detail
Effective for Torque up (Sound deadening effect?)
AKRAPOVIC's Full Exhaust System&Silencer on MC51 (for Race) The combination of the two was used.
In the Circuit, the inner baffle was too loose without the baffle and the Torque was insufficient at low RPM. (BF50S/M) attached.
Torque recovered, but the exhaust sound was still too loud and bothersome, so I purchased a one size small BF50S/S this time.
The sound deadening effect of the BF50S/M is virtually non-existent.
In addition, all of the sound deadening material burned out after about 20 minutes of Circuit driving.
I would like to check the effect of BF50SS in the next Circuit run.
The results were measured with a sound level meter before and after the replacement of M&arr;S.
(1m away from Silencer)
*Please use it only as a reference, as it varies depending on the measurement conditions.
BF50SM (Sound deadening material burned out)
12000rpm (114.6dB)
4500rpm (Not measured)
BF50SM (Sound deadening material rewound)
12000rpm (113.5dB)
4500rpm (96.4dB)
BF50SS (with sound deadening material (new)) )
12000rpm (110.9dB)
4500rpm (95.3dB)
Idling (82.1dB)
For those who drive on the street, we recommend installing JMCAMODEL's Silencer.
View detail
Too muffled?
I installed MV83 Silencer on my Z900RS and put MVSlit muffler because it was too loud.
I thought it was moderately muffled, but it is definitely muffled.
The volume and sound quality were about the same as the Japan Government Certificated Striker's Silencer because the sound was muffled too much.
If you want to muffle the sound moderately, we recommend that you purchase the Sports Type.
It was a disappointment for me, but it was muffled as the name of the product suggests, so I'll give it 5 stars because it is a solid product.
View detail
Baffle itself is a nice inconspicuous shade.
We chose this shade of product because it is embarrassing if the End Baffle stands out.
When actually mounted on Silencer, it is good that the BaffleBody is almost invisible in the shadows depending on the angle.
In fact, I would like to ride with a straight pipe too.
View detail
Used for SR400
It is effective to reduce exhaust noise, but the sound quality is not to my liking. View detail
When it runs, it's Bigli
I ran it and it was very quiet.
I didn't know that at the time of Idling, sorry.
I installed it on techserfu's Silencer to try it out!
It was very quiet with Silencer's End Baffle removed!
Loud enough to pass inspection (99 decibels)
It was like a Motorcycle for Large people.
After driving 200 km, I checked the White Glass Wool and found it to be pure Black!
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
That was good!
It is quieter than the others. View detail
Subtle Product.
It has been on the market for a long time now, maybe 20 years.
Used on a BuellX1 with a full titanium muffler from Kasuno.
The construction is quirky. The price is very bullish.
As for the effectiveness, there are other inexpensive and effective ways to muffle the sound. If you are looking for a back pressure control, you may be able to find some use for it, but if you are looking for a S size control, you may not be able to find a good solution.
Please buy one and try it.
I sold immediately.
View detail