Reviews
Reliable Manufacturer
Since the parts around the Brake are vital, we chose a reliable Manufacturer.
The fact that there are many different lengths is also helpful, so that when the distance between the BrakeCaliper and the MASTERCylinder changes from the OEM, such as by changing the handlebar, the user can choose just the right length.
View detail
Replacement for Radial masterCylinder change
When we changed from Horizontal Type MasterCylinder to Radial Type MasterCylinder, the Banjo Adapter was installed in a larger position, so we had to install it. View detail
Also effective in reducing microvibration
The Normal handle bar has an integrated Bar End, but we replaced it with a Sansei RACING Handlebar, so we searched and selected a Bar End that would fit it.
Since it is made of steel, it has a certain amount of weight, and this weight has reduced the fine vibrations transmitted to the Handlebar.
Brake lever side guard is Material:Plastic, flexible, and with rounded corners, you won't have to worry about using it on the street.
Plus, if it should break, replacement parts are available at relatively low cost.
View detail
This is good.
The shape of the mirror is designed to avoid the arm holding the handlebar, so the visibility is surprisingly good, and the bracket is thin, so it may be good to be less assertive.
The Mounting Base is a little large, so I adjusted it with a washer so that there would be no wound left on the cowl when tightening it.
View detail
heavy
Heavy.
I felt Fashion had a lot of personality,
It is too heavy, partly thanks to unnecessary design.
The construction is sturdy and easy to see without blurring.
The Handlebar area is too heavy to be operable.
We ended up reverting to OEM.
View detail
I'm sorry.
There is nothing wrong with the functionality, except for the Bolt section Material:Plastic and molded BALI are also available and do not appear to be of very good quality.
There are similar MirrorRepair Parts by TANAX, which are made of Gold genus and have a much better finish. (but it is heavy + has a weird logo mark of Tanax)
View detail
It was not enough.
There is nothing wrong with the functionality, except for the Bolt section Material:Plastic and molded BALI are also available and do not appear to be of very good quality.
There are similar MirrorRepair Parts by TANAX, which are made of Gold genus and have a much better finish. (but it is heavy + has a weird logo mark of Tanax)
View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA MT03
Brake Side
Model YZF-R25
(8BKRG74) 2022 MODEL
Brake Side Image
View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA MT03
Requires ingenuity in installation
Model YZF-R25
(8BKRG74) 2022 MODEL
I have prepared the following items to install the brake pedal side.
KITACOAluminum Bracket
BracketWidth:20mm/Thickness:3mm
Hole Size:φ6
Length:60mm
Spacing:40mm
YamahaOEM
Brake fluidReserverHolder
(2015 1WD-F582E-00)
JointZ type bracket with 3 holes
BoltM6×12、M6×15、M6×20
Flange nutM6
Mounting position is set at 60mm back and 40mm up, which is the position with the least interference.
On the shift pedal side, the included shift rod does not fit well, so it will be replaced at a later date.
After the installation, I think it was better to check the position here than to buy expensive Rear Sets and make a mistake. I learned a lot.
View detail
Fits: HONDA CB1100F, HONDA CB900F, HONDA CB750F
Watch out for small parts.
First of all, when you take it out of the box, there is an E-shaped Snap ring in a small bag, so you might lose it if you open the bag carelessly. I found the Snap ring in the Instruction Manual, and found it lying at my feet.
Next, in the Instruction Manual, the footpeg is removed and the U-shaped plate is fixed with a bolt, but there is a small ball on the footpeg and a spring holding it down, so the ball will fly off with the spring if it is not removed carefully.
When putting the footpeg back in, there is a plate between the U-shaped footpeg and the footpeg, so the footpeg and the plate sandwich the spring and the ball between the footpeg and the ball and hold it down to some extent while inserting the footpeg.
View detail
Fits: SUZUKI SV650X ABS, SUZUKI SV650 ABS, SUZUKI SV650X ABS, SUZUKI SV650 ABS
I saw that it was out of print, so I suppressed it.
Manufacturer OEMOption Parts.
I bought it because it is out of print and I thought I would hold on to it.
Yeah, failure.
White on Gun meta as per image (over Paint or Seal) [Color] (Clear?) It was.
The one up in the product image looked Black.
In any case, Out for Mat silver bodywork.
It would have been better if it were black instead of the shiny gun meta.
Two bright, flashy colors that are not on the body of the car.
Parts that would look good on a Black SV from Gun meta.
I tried Silver as a trial, but the Fit feeling is not so good.
Paint was returned and sealed to the Stock shelf as a testFit only item.
View detail
Fits: HONDA CBR650R, HONDA CBR650R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CB650R
The construction is good.
Installed on a CBR650R.
ExactlySize allows installation without removing the Cowl.
Stainless Steel system with holes (Punching) is also good for Original Shape.
Happy with the SilverPlating on the black car body.
Would be nice if the price was a little lower, though,
View detail
Let's put it on.
It is very effective Large. First of all, however, the smallest turning radius becomes large due to the body contact stopper, and it is necessary to turn around when turning in narrow parking lots, etc. There is no problem in driving itself.
Single-cylinder vibrations transmitted to the handlebar are reduced, making driving easier.
It is now safe to enter a rough Curve with a Gap.
It looks like a body on a top ranking.
The construction is beautiful and satisfactory for a cut-out plate.
If the price is acceptable, we recommend that it be installed.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
This is the overall satisfaction level for ass pain measures
Since I bought a z900rs, I have been worried about the ass pain that everyone else is suffering from,
I have been studying all over the Net and watching YouTube.
There were many candidates, but we chose DOREMI for quality, cost performance, and delivery time.
The product was out of stock due to its popularity, but thanks to the power of Large Hand Wafer Big, we were notified that the product would be in stock soon and it was delivered.
The Tandem seatBelt requires a hole to be made by myself, and although I was nervous, I was able to make the hole without difficulty,
Belt could also be attached, although it is a little stiff.
I usually get an ass ache as soon as I go touring,
I felt that it was considerably eased.
Footing is a little worse, but not a problem at all in exchange for butt pain.
I would highly recommend it to anyone who is unsure about Seat from another company.
The quality is as good as OEM is also recommendation.
View detail
Pre-cut and inexpensive
I usually buy rubber mats and cut them, but this product is pre-cut and at this price, so there is no extra hassle.
Grip is also good.
View detail
Fits: HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R
It is definitely better than OEM.
I just took it off and put it back on, and so far it hasn't come loose, but if you're worried about it, you need to get it back on.
It looks good, but the price is too high,
View detail
Fits: SUZUKI SV650 N, SUZUKI DL 650 XT V-Strom, SUZUKI DL 650 V-Strom
The CP is also good.
From the name PyramidPlastic, I was prepared to order some more cheap products.
In fact, the FRPParts arrived with a high degree of precision, which is quite high for exterior Parts from overseas.
The bracket engages the Crankcase Bolt firmly, and the engagement with the FRP part is not bad.
However, the supplied Bolt is a bit short, so you may want to prepare a Bolt of about +5mm.
It is not impossible to stick to FRP, but it does not put a load on FRP, and above all, it increases work efficiency by a large margin.
In fact, a separately purchased DesignBolt was used for installation.
I have the impression that it took quite a long time, but it is because it is an overseas parts.
Considering that the FRP parts are solid and cost only 20,000 yen, the cost performance is also good.
View detail
impossible
When I received the package and checked it immediately, I found that the Package had already been opened and the product itself was not in the package.
Why is this not noticed when packing?
I have used many different mail order services, but this is the first time I have seen such sloppiness and I feel bad.
I don't want to give even one star.
View detail
Carbon
Scratches on the Black colored Tank are inevitable, so install it before it gets worse.
It is easy to apply with double-sided tape.
The seam between the Tank and Seat is also rounded off so that it does not look out of place.
However, the part without Tape is creaking" when pressed, so it might be better to add more Tape.
Some edges are not able to follow the subtle curvature of the tank, but I don't mind.
View detail
Fits: YAMAHA XS400SP, YAMAHA XS1100, YAMAHA SR500, YAMAHA SR400, YAMAHA GX750SP, MOTOGUZZI 1000LE MANS, MOTOGUZZI 850LE MANS, MOTOGUZZI 1000SPII, BMW R80RT, BMW R80ST, BMW R80, BMW R80GS, BMW R7, BMW R65S, BMW R45, BMW R65G, BMW R100RT, BMW R100R, BMW R100RS, BMW R100GS
Replacement recommended before Carburetor setting in SR (1JR)
I am using it on a 1998 late 1JR Carburetor generation SR.
525 modified (certified modified, he also holds a Large type license) and the carburetor has been converted to FCR Carburetor Body41.
Ignition system is iron CDI + OEMCoil of the previous year for the convenience of using Crank of the previous year of 1JR.
Plugs have been replaced about 6 times in 20,000 km due to the following Setting.
In the case of SR, it is not necessary to replace it frequently because the normal RPM is not high, but 1JR does not progress in self-cleaning in town driving due to the weak spark at low RPM of the ignition system (it seems to be intentionally done so to prevent kettling), and FCR Carburetor Body41 is even more incompatible with it. If the carburetor setting is set even a little too thick, the carburetor will turn completely black after about 1000 km and will not return to normal, as shown in the picture of Plug.
Therefore, when you do a carburetor setting that involves a large change, you basically need to replace the plug.
The peripheral creepage is in the vicinity of the Idling, the insulator is in the low open area, and the center electrode is in the MJ area.
To begin with, SR is a 2Valve big single, for better or worse. Large, crude, old car." The complete warming up of the engine takes about 30 minutes in winter, or about 10 km in distance, so if you try to set the setting by focusing on the feeling of the engine after just a short ride, the engine will tend to run in a thicker direction. So, when I try to set the setting with emphasis on the feeling after a short ride, the setting tends to be in the direction of the dark and is not fixed.
I concluded that it is best to put on a new Plug and watch it burn in the end, since it does not go to a perfect fit using the AF.
So, I am replacing it before Setting, thinking that it would be easier to do after Battery ignition, but 1JR is easy to understand...right? There are times when the price fluctuates slightly, but it is helpful because it remains inexpensive as if it is the superior etc. student of prices.
View detail