Reviews
Fits: KAWASAKI GPz1100, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z1100GP, その他 , KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z1100 R (US), KAWASAKI Z1000 MkII, KAWASAKI Z1000 A1-A2(US), KAWASAKI Z1-R, KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z1100 R (US), KAWASAKI Z1000 MkII, KAWASAKI Z1000 A1-A2(US), KAWASAKI Z1-R
Constructed on Z1
I was using another company's BOOSTER for light intensity measures for car inspections, but it had a large relay near the battery and I had a hard time finding space to install it, The Pams BOOSTER cost less than other companies, but it fits in the headlight case, so I am satisfied with it.
I don't know about durability yet, as I just installed it.
View detail
Fits: HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY)
NTB Flasher relay for 2 wheels 6V
This is a smaller type than the OEM Product, but the performance is almost the same. I removed the battery case, put the bracket over it, and installed the relay when I installed the regulator, so it fits nicely inside the Left SideSide cover. View detail
Where Solder is connected, etc.
It can be used for branching connection with a solder, protection of Cable, etc.
It would be better to shrink them with a heat gun, but they are shrinked by lightly frying them with a lighter.
Be careful not to put the flame too close to it or it will melt.
View detail
For terminals of 4.0sq cord for charge current
I bought a battered 900SS (900SL) and am Restore.
The harnesses are also in bad shape, so we cut and re-created the damaged parts of each section.
The very thick wire for the Starter motor and the carburetorTire wire connecting the Engine and Chassis are also deteriorating over time and are crumbling and falling apart.
The internal core wire was also corroded by moisture that had entered the wire and was spewing GreenBlue, so it was re-created.
After the terminals are crimped with Electric Works Pliers, solder is applied to the terminals for secure wiring, and these terminals are protected with Shrinkable Tubes to prevent shorts.
The tube is coated with an adhesive that melts when heated and shrinks to make it Completely Waterproof, preventing moisture from entering the cord through the terminals.
It also serves as a Cover for the terminals, so using different colors of this Shrinkable Tube (Red and Black) helps to prevent accidental wiring.
It is especially effective when used in the terminal section that conects directly to the Battery terminal.
Φ9.5 is quite thick for Motorcycle wiring, so there are not many uses for it, but it is ideal for terminal protection for Starter and Earth.
Although it is possible to purchase a similar product at a wiring store at a much lower price, considering the time and effort required to go there and the use of multiple mail order sites, I think it is most cost-effective for ordinary people to buy a DAYTONA product at Webike, even if it is a little more expensive.
View detail
To add Ground Cable
I installed a Ground Cable in my gn125h and it worked great, so I decided to be a little greedy and install a total of 3 Ground Cables! View detail
put together in a presentable manner
Recent Small blinker wiring is ultrafine
It's as if it would tear into a thousand pieces if you applied a little too much force.
If you attach it as it is, it will surely break off.
And it looks bad Parenthesis.
So I reinforced it through Tube.
Finished by decorating with an Amigumi Sleeve
Just this much will make it look so much better.
It's definitely better than the BlinkerWiring roundup.
View detail
Trust.
It claims to be weather resistant, so trust it anyway.
I have always been an Emon believer.
… I don't think it's any different than the others, … (laughs)
2sq for Grounding Wire.
View detail
Purchased for the Wiring branch that does not take up Space!
I bought it for the Wiring branch!
It is convenient for Wiring branching that does not require soldering and does not take up space!
View detail
For homebrew
DAYTONA sells Headlight RelayHarness, though,
I wanted to make a Bullet Terminal for Wiring and Honda in OEM colors and a Layout to fit Relay in the Tool Case.
I made my own Harness utilizing this for RepairRelay.
It is well made and Switching works fine.
I gave it three stars because it may not come into play during the optical axis light intensity test for vehicle inspections, and I am not sure of its durability.
View detail
Good quality but too much import taxes
About quality and texture : Very good quality About shipping and packaging : I bought for 31€ of parts and got 31€ more for import taxes : total 62€ for 10 pieces. It doubles the final cost and it must be considered before ordering... View detail
for Replacement
Relay on headlight relay kit suddenly broke
Purchased two Relay replacements because it's not a Wiring problem.
The product is an ordinary product with no negatives or positives.
I replaced the Relay so I can use it safely for the time being.
View detail
DAYTONAIncluded Parts:Connector required as
I have Repeat several times, but the Bracket is soft and difficult to connect firmly even with Crimp.
However, when using DAYTONA-related equipment, including Charger, it has become an indispensable Connector.
View detail
Good quality but...
The parts are good quality ones, but the import tax doubles the price. In my case : about 31€ for the parts + 31 € for the tax. To consider before buying. View detail
Easy to charge
Purchased an additional Motorcycle.
It is convenient to keep Charger connected during the non-riding winter months!
Charger does well these days, just plug it in and it's good to go!
View detail
Effective
I purchased this for a power supply for a Grip heater that is attached by wrapping it around.
In the summer, I remove the Grip heater, so I use this Connector for One-touch power supply.
The waterproof specification is safe and secure.
The terminals are small and can be damaged if you are not careful when crimping through wiring.
View detail
Fits: KAWASAKI GPz1100, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z1100GP, その他 , KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z1100 R (US), KAWASAKI Z1000 MkII, KAWASAKI Z1000 A1-A2(US), KAWASAKI Z1-R, KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z1100 R (US), KAWASAKI Z1000 MkII, KAWASAKI Z1000 A1-A2(US), KAWASAKI Z1-R
Essentials for old cars
It was introduced as a countermeasure for KATANA's vehicle inspection. It has already been installed in NINJA and GOOSE, which I also own. View detail
for storing wires or cables as needed It is chrome color, the material is springy, easy to use. View detail
Constant replenishment
It would be useful to have it at the three-way junction.
Until now, we have cut off the head of the Bullet Terminal and substituted it with the Crimp section.
View detail
About the same thickness as Car's Audio systemWiring
0.5sq, as the Title suggests, is ideal when thicker Wiring is not required!
I'm surprised (and grateful) that Webike also handles it.
View detail
Bigli handled by Web!ke
0.The thickness is 5sq, which is often used for car audio system decks and the like. View detail