Reviews
Fits: KAWASAKI Ninja250, KAWASAKI Z250, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZM50R, YAMAHA TZ50, TRIUMPH TIGER1050, SUZUKI BURGMAN400, SUZUKI BURGMAN400, SUZUKI BURGMAN200, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman SS, SUZUKI DR800S, KAWASAKI ELIMINATOR 125, KAWASAKI Z400, KAWASAKI Z400, KAWASAKI Z250SL
Used for city driving
It is used for city driving.
Controllable and good feeling. It is less scary even on rainy days. The price is not too expensive and I like it.
I will report again on durability.
View detail
![Brake Pad - Racing [RC] Compound](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0276/23955303_1_TS.jpg)
Fits: HONDA VFR800F, HONDA VFR800X, HONDA CBR600RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR1000RR, HONDA CBR1000RR
Satisfied with cost-effectiveness as For RacingPad
I installed it on Circuit Running's CBR600RR (PC40 2011).
Speaking of brembo's racing pads, Z04, Z03 for endurance, and Z10 recently released are the standard, but they are expensive...
I chose the far cheaper RacingCompound (RC) since it is not used for Solidly's Race.
Before the replacement, it was a replacement from HRC (Honda's RaceParts) N615.
This was not a complaint, but the Quantity:30,000 yen for 1 Set for 1 Vehicle...
The bremboZ03 is a Quantity:40,000 yen for 1 Set for 1 Vehicle....
I was a bit worried about the price of the racing pad, which is less than half of the price of the racing pad, but brembo claims it is "for Race", so I was a bit nervous and had mixed expectations.
bremboRC is a CarbonCeramic system, which means it is not sintered.
Some people think that it has to be Sintered, but in conclusion, there was no problem.
Since the pad brand was changed, the disc surface was peeled with steel wool (Bonnstar) at the time of replacement.
Of course, when we replaced the pad, we also cleaned the Piston and replaced the DOT 5.1 Fluid. We finished it perfectly.
Here are my personal impressions after using it at Sports LandSUGO.
Control is good from the beginning to the back.
The μ at low temperatures is not extremely low, and there is no need to be conscious of heating to raise the temperature.
Even when the temperature rises, there is little change to BrakeTouch, which is a good impression (although it is also a new pad).
Low thermal strain, good strength of back plate
The surface of the disc becomes black due to the effect of heat and the carbon film.
The braking force of △ Full Brake is milder (less potent) than HRC/N615, and it would be easier if it bites a little more.
The amount of Dust powder on the Wheel is small, so it is expected to be more Life than HRC N615.
So I feel a slight difference in efficacy compared to the high price FOR RacePad, but it is a much higher dimension than OEM, and from the Balance of price and Brand reliability, I am glad I bought it.
Since the BrakeCost per pc driven drops to about half the cost, I can add that floating budget to the Tire cost.
View detail
![BRAKE PAD-DRAG ORGANIC [1720-0197]](https://img.webike-cdn.net/catalogue/images/35311/17200197_TS.jpg)
Accuracy...
The hole where the pin goes in was distorted and needed to be scraped with a file. It is not a large problem with a little work, but if you don't have a file, you cannot install it. This is why the quality rating is so low. View detail
Fits: INDIAN MOTORCYCLE 1130 SCOUT, INDIAN MOTORCYCLE 1130 SCOUT BOBBER, INDIAN MOTORCYCLE 1000 SCOUT SIXTY, HUSQVARNA VITPILEN 401, HUSQVARNA VITPILEN 701, HUSQVARNA TR650 TERRA, HUSQVARNA TR650 STRADA, HUSQVARNA TE250, HUSQVARNA TE 510 CENTENNIAL, HUSQVARNA TC250, HUSQVARNA TC250, HUSQVARNA TC 510, HUSQVARNA SVARTPILEN 701, HUSQVARNA SVARTPILEN 401, HUSQVARNA SM 510R, HUSQVARNA SM 450R, HUSQVARNA SM 510R, HUSQVARNA SM 450R, HUSQVARNA SM 400R, HUSQVARNA NUDA900
I think it is a good, inexpensive product.
This is a Rear Brake Pads replacement for a 2022 Gixxer 150, note that the pad numbers are different until the 2019 model year!
https://imp.webike.net/article/636864/
To replace it, remove the pin, remove the shaft, and replace it.
The worn out pad has a pod sticking out, so a new pad will not fit in the gap, so a push-back tool is used to put it back in.
If this work is not done well, the pad will not fit, so the skill in this area depends on the person, and it is an important part, so if you don't have an earthquake, have it done at a store.
The Pad is neither good nor bad, and I continue to use SBS, which is cheap like DAYTONA's RedPad, so I guess it's a matter of preference.
View detail
Fits: HONDA VALKYRIE1500 TOURER, KAWASAKI VERSYS 650, SUZUKI GEMMA250, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI GSR250S, SUZUKI GSX250R, SUZUKI INAZUMA250, SUZUKI V-STROM 250, SUZUKI IMPULSE400, SUZUKI IMPULSE400 TYPE-S, SUZUKI RF400R, SUZUKI RF400RV, SUZUKI SKYWAVE650, SUZUKI SKYWAVE650, SUZUKI GSF750, TRIUMPH STREET TRPLE675, TRIUMPH BONNEVILE800, TRIUMPH BONNEVILE865, YAMAHA CYGNUS X
It stops better than NORMAL.
It stops more than NORMALPad.
It's about half as thick.
It is easy to control and suitable for touring and winding. Considering the cost performance, it is about half the thickness, so I think it is not the most expensive one.
I'm not sure it is suitable for Circuit or Sports driving applications.
View detail
Fits: HONDA CMX/REBEL 450, HONDA CB125TD, HONDA CB125T, HONDA XL600V Transalp, HONDA XL600V Transalp, HONDA VT500FT Ascot, HONDA VP750CH Custom, HONDA VL750R, HONDA VFR400Z, HONDA VF750S, HONDA VF750F, HONDA VF750C V45 Magna, HONDA VF750C V45 Magna, HONDA VF700S Sabre, HONDA VF700F Interceptor, HONDA VF700C Magna, HONDA VF700C Magna, HONDA VF500F, HONDA VF500C V30 Magna, HONDA VF400F
Brake Pads Replacement
I used VesrahResin pad for the first time and it worked well enough for city driving and touring. Although the mileage is still low, the brake squeal has stopped. I would like to check the effectiveness and the aggressiveness to the rotor in the future.
If the results are good, we would like to continue using it.
View detail
Fits: YAMAHA YZ250, YAMAHA YZ125, YAMAHA TT250R, YAMAHA TT250R Raid, YAMAHA DT230 Lanza, YAMAHA DT200WR, TRIUMPH T955 DAYTONA, TRIUMPH BONNEVILE, TRIUMPH SPEED TRIPLE S, SUZUKI Bergman 400, SUZUKI Sky Wave 400, SUZUKI Jebel 250, SUZUKI TS200R, SUZUKI TS125R, SUZUKI RMX250, SUZUKI RMX250 S, SUZUKI RM250, SUZUKI RM125, SUZUKI DR250SHE, SUZUKI DR250S
I've only driven about 100km ….
I replaced Red Pad with this one.
I drove about 100 km for now and it works normally.
No wonder.
This may be more suitable than Red Pad, which is more aggressive because it is an off-road vehicle.
It was before, so I don't know much about it. (Sweat)
View detail
Fits: KAWASAKI ER-4N, KAWASAKI ER-4N ABS, KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI ER-6N, KAWASAKI GPZ1100, KAWASAKI GPZ1100 ABS, KAWASAKI NINJA 400R (NINJA), KAWASAKI NINJA 400R ABS (NINJA), KAWASAKI NINJA ZX-10R (NINJA), KAWASAKI NINJA ZX-10R (NINJA), KAWASAKI NINJA ZX-10R (NINJA), KAWASAKI NINJA ZX-10R (NINJA), KAWASAKI NINJA ZX-6R (NINJA), KAWASAKI NINJA ZX-6R (NINJA), KAWASAKI NINJA ZX-6R (NINJA), KAWASAKI NINJA ZX-6R (NINJA), KAWASAKI NINJA ZX-6R (NINJA), KAWASAKI NINJA ZX-6R (NINJA), KAWASAKI NINJA ZX-6RR (NINJA)
Impressions after 100 km of use
The Rear Disc had reached the end of its useful life and was to be replaced with a new one, so the Pad was also replaced accordingly.
I tried using the pad without pad grease and without beveling the pad surface to get an idea of the pad's performance, but it did not squeal.
It did not work well until it hit, but once it hit, it worked well.
When the hit is applied, it works in proportion to the force of the step, so it is very easy to control the Brake.
I don't know about durability as I just started using it, so I will give it 3 stars.
View detail
Fits: SUZUKI WOLF125, SUZUKI WOLF200, SUZUKI Bandit 250, SUZUKI Bandit 250 Limited, SUZUKI GSX1100G, SUZUKI GSX250S Katana, SUZUKI SW-1, SUZUKI VX800, SUZUKI GS400E, SUZUKI DR800S, KAWASAKI barios, SUZUKI ACROSS, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 400, KAWASAKI Zephyr 400, KAWASAKI Zephyr 1100RS, KAWASAKI Eliminator 400, KAWASAKI Zephyr 1100, KAWASAKI ZZR400
Looks good.
I chose it for its durability, but the durability is yet to be determined. View detail
Fits: YAMAHA TRACER9 GT, HONDA CB1100EX, HONDA CB1100EX E Package, HONDA CB1100BLACK STYLE, HONDA CB1100, HONDA CB400SF, HONDA CB400SB, HONDA VTR1000SP-1, YAMAHA FAZER8, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CB1100, HONDA CB1100 typeII, HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA CB1100 typeI, HONDA CB1000SF, HONDA CB1000SF-T2, SUZUKI BANDIT1200 S, SUZUKI V-STROM1000, SUZUKI SV1000
Replace Red with Golden Pad
I have not been able to drive yet because of the rain, but I changed the pad as well as the Caliper OH!
I'm looking forward to running it. ('∀ `)
View detail
Fits: HONDA CB400SF HYPER VTEC SpecIII, HONDA CB400SF HYPER VTEC SpecII, HONDA CB400SF HYPER VTEC Revo, HONDA CB400SF, HONDA CB400SB, HONDA CB400SB, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER FOUR, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SB, HONDA CB1300SB, HONDA CB1100EX, HONDA CB1100EX, HONDA CB1100EX E Package, HONDA CB1100EX BLACK STYLE, HONDA CB1100BLACK STYLE
Nice...
I replaced it with a Sintered pad because the Brake squeal would not go away and it was less expensive and seemed more durable.
The pad before replacement came with an unknown manufacturer, so there is no comparison, but it works and does not squeal as usual. 。
Control is much better than I expected, and the effectiveness changes with the amount of force.
It seems to be a bit aggressive to Rotor, which is a concern, but it was a good decision to replace it.
View detail
Fits: HONDA CBF1000, HONDA NC700X, HONDA NC700SXL TYPE LD, HONDA NC700S, HONDA CBR250R, HONDA CBR250R, HONDA CBR1000F, HONDA CB650F, HONDA CB500 F, HONDA CB400X, HONDA CB400SF Ver R, HONDA CB400FA, HONDA CB400F, YAMAHA WR250X, TRIUMPH Tiger 800XC, TRIUMPH Tiger 800, TRIUMPH Thruxton 900, TRIUMPH Thruxton 865, TRIUMPH Street Twin 900, TRIUMPH Scrambler 865
Brake to JackKnife if you apply it strongly ".
This was the first time for me to use the Metal pad, but I have the impression that it works harder than the previous Golden pad.
I grabbed Lever with my usual BrakePoint and it worked so well that I JackKnife'd it unexpectedly.
We are still waiting to confirm the durability of the product, but as for the effectiveness, we are satisfied with it.
View detail
![Brake Pads [Stock Type]](https://img.webike-cdn.net/catalogue/images/29487/E441_01_TS.jpg)
Fits: KAWASAKI Z1100R, KAWASAKI Z250FT, KAWASAKI Z750LTD, KAWASAKI Z750FXII/III, KAWASAKI Z1100GP, KAWASAKI Z1000R, KAWASAKI Z1000P (POLICE), KAWASAKI Z1000 (air-cooled), KAWASAKI Z750FX, KAWASAKI Z750 (air-cooled), KAWASAKI Z400LTD, KAWASAKI Z550, KAWASAKI Z400GP, KAWASAKI Z400LTD, KAWASAKI Z400FX/Z400J, KAWASAKI Z250LTD, KAWASAKI Z750FXII/III
just a minute
I am a little concerned about the weight of the car. View detail
Fits: HONDA DIO110, HONDA LEAD125, HONDA PCX150, HONDA PCX, HONDA ZOOMER X, HONDA ZOOMER, HONDA Lead EX, HONDA DIO110, HONDA PCX, HONDA PCX150, HONDA ZOOMER・X, HONDA LEAD 125, HONDA LEAD EX 110
Highly Control
OEM comparison,
Braking power obviously changes.
Touch on Brake lever is surprisingly Mild.
Wear and tear is a little fast.
Aggressiveness of disc is normal. disc replaced at 60,000 km.
The Red Pad is almost identical to the OEM and ends up being about half as durable as the OEM, so the Golden Pad is better as a result.
Braking power should be the first priority because it is more problematic not to stop at a dangerous SCENE.
If you want to replace it at a store, you will have to pay a labor charge. If you buy a Red Pad, which has only about half the life span of a Golden Pad, because it is cheaper, the resulting two-time labor charge will be the same as for a Golden Pad.
In conclusion, Golden Pad has high braking power and good cost performance.
View detail
Fits: HONDA CMX/REBEL250(ABS), YAMAHA XV1700, YAMAHA XV1700, YAMAHA MT-01, YAMAHA MT-01, YAMAHA MT-01, YAMAHA MT-01, VICTORY Vision Tour, VICTORY Vegas, VICTORY Vegas Ness Signature, VICTORY Vegas Jackpot, VICTORY Vegas 8-Ball, VICTORY Vegas 8 Ball, VICTORY Ness Cross Country, VICTORY Magnum, VICTORY Kingpin, VICTORY Kingpin 8 Ball, VICTORY Judge, VICTORY Jackpot, VICTORY HighBall
Switching from NORMAL
The effect was definitely stronger.
Nevertheless, the Grip force of Tire also has a Quantity:Pair (for Left and Right) The current Pirelli Sport Damon is inferior to the IRC RX-02 when it was the NORMAL Pad.
In other words, I imagine that the combination of RX-02 and this pad works very well.
Other reviewers have written about Fee Rings when reverting Levers, but for someone like me with little skill and experience, I have no idea.
Also, when I apply Brake, I hear a jiggle or some kind of electronic sound.
View detail
![Brake Pad - ROAD [SA] Compound](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0320/25641042_20221221134746979_TS.jpg)
Fits: SUZUKI GF250, SUZUKI GSX-R1100, SUZUKI GSX250 SP, SUZUKI GSX250R, SUZUKI GSX250R, SUZUKI GSX400R, SUZUKI GSX400X Impulse, SUZUKI GSX750R, SUZUKI GSX750RR, SUZUKI RG400 γ, SUZUKI RG500γ, SUZUKI VS1400INTRUDER, SUZUKI VS1400INTRUDER, SUZUKI VS750INTRUDER, SUZUKI VS800INTRUDER, SUZUKI INTRUDER400, SUZUKI INTRUDER LC, SUZUKI INTRUDER LC, SUZUKI DESPELADO800
Sintered and Pad as OEM
The OEM pad for RG400/500Γ is out of stock and we are looking for a Sintered pad similar to the OEM one. The Sintered Pad is considered to be valuable because there are almost no Sintered Pad made by other companies. View detail
![Brake Pad - ROAD [CC] Compound](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0321/25641066_20221226140428878_TS.jpg)
Fits: YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3
Used for MT-25 for Rear
[How is it used?
I replaced the Brake Pads on my MT-25, which I use for commuting and touring, because they were running low on remaining capacity before I knew it.
Although DAYTONA's Red Pad is the iron plate as an external pad, I was curious what brembo's CCCompound was like, so I purchased it.
Was the one you received as per Image?
It was just like the picture.
They are the same shape as the probably OEM Brake Pads that came with the vehicle when it was purchased, and naturally had no problem installing them.
Was the installation difficult?
If you have some maintenance skills, it is easy because all you have to do is remove the rear tire and replace the pad.
The Pad pin of MT-25 is just a pin that prevents it from falling out, so there is no need to worry about Bolt sticking.
Although no particular chamfering was performed, the braking power was sufficient from the start.
How was your experience with it?
The CCCompound is designed for city driving, so it is more mild than the previous pad.
The more the Rear locked up until then, the more it stays rotated without locking up when Brake is stepped on.
Although it is not capable of a heavy brake, it seems to be mild enough for normal driving in town.
I drove on a rainy day, but I did feel that the braking power itself was almost the same even with Large rain.
I have driven about a hundred kilometers since the replacement and there is already a little Brake dust.
This means that it is decreasing, so I think Life is not that long.
Brake Discs seem to be less aggressive, so it may be possible to improve the life of the Disc Side.
[Included Parts:were they on?
Brake Pads only.
Don't forget to Grease as well, as Caliper will also need to be maintained when the pad is removed.
[Was there anything that disappointed you?
It is not a disappointment, but I noticed after installation that the pad is quite conspicuous because of its blue color.
This is even more so with the MT-25, which has almost only Black around the rear.
【Review】
This pad is for street use, even in the rain.
It is not suitable for hard breaking, but it may be sufficient for 250cc for rear.
View detail
Fits: HONDA CBR125R, HONDA Monkey 125, HONDA hunter turnip, HONDA GROM, HONDA CT125, HONDA APE50 TypeD, HONDA APE50 TypeD, HONDA CBR125R, HONDA DAX125, HONDA GROM, HONDA CT110 HUNTER CUB(CT125), HONDA MONKEY125, HONDA MONKEY125
Stable.
I have been using Red Pad for about 10 years. Stable and reliable. View detail
![Brake Pad MSC [MAXI SCOOTER]](https://img.webike-cdn.net/catalogue/10524/msc_TS.jpg)
Fits: DAELIM S2 125 Free Wing, DAELIM S2 250 Free Wing, HONDA FJS 400 Silver wing 02-08, HONDA FJS600 Silver wing GT ABS, HONDA FJS600 Silver wing GT ABS, HONDA FJS600 Silver wing, HONDA FJS600 Silver wing, HONDA FSC600 Silver wing GT ABS, HONDA FSC600 Silver wing
Abrahams chirp when they get used to it.
I bought this for my SILVER WING600for Front, and while the OEM Product is not necessarily sweet, it certainly feels sweet at the speeds I use it at. Especially at the beginning of the grip, I sometimes felt a slight twinge, so I decided to purchase the external product.
At first, I was looking for DAYTONA's GoldenPad, but it was not available due to the fact that the vehicle was old, so I looked elsewhere, but the brake was very special and there was an on-parade of incompatibilities, and eventually I settled on this brake.
I have to say that after the break-in period, I started to hear a jiggle sound every time I held it. At first I thought it was ABS noise, but it is not. I don't mind it in noisy places, but when I am touring on a mountain pass, the noise is just too much. Also, it seems to be very disc aggressive. I am wondering if I should replace the pad and disc at the same time next time.
View detail
Fits: YAMAHA NMAX, YAMAHA NMAX, YAMAHA NMAX155, YAMAHA NMAX(125), YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX155
Reliable Braking Power
[How is it used?
It is installed on a NMAX 155.
I bought a used car and replaced it with a Timing with a total mileage of over 10,000 km.
Since this is my first Pad replacement, I have not been able to compare it with other Other Brand Products.
How was your experience with it?
The Pad at the time of purchase of the vehicle is probably from Standard Equipment, but it is a more stable braking force than that.
It is very important to be able to stop safely as it is a commuter vehicle that we ride every day.
However, there is no sense that it is dangerous to stop too much, but only that it is safe to stop strongly, which is very good for Fee Rings.
The other part is how much Life is, but that will be discussed later, as it hasn't been that long since the replacement.
View detail