Reviews
Reliable Filter
I bought it two years ago and this is the second time. It was not badly stained,
Replaced to prevent carburetor clogging.
It has magnets on it so it will remove rust, etc.
View detail
Used for preventive replacement
I replaced it before it cracked because the flexibility of the hose was reduced.
Is it not offered in Bulk items like NSR or is it expensive for a short Hose?
View detail
Tank was replaced and used.
Used for APE Tank replacement. [Color] It's not Clear, so it's OEM tone. View detail
A Perfect Replacement
I purchased this as a replacement for the OEM part on my 1990 Kawasaki ZR550 Zephyr. It is, as far as I can tell, the exact same part. It literally is the OEM part, just without the OEM packaging, and for a lot less money. Perfect! View detail
I put it on as a spare.
External Fuel filter attached to ESTRELLA.
It has been immobile for a while, and you can often find a little bit of age-related deterioration in various parts of the car. 。
There does not appear to be any fuel seepage, especially in the Fuel Cock area, but there is no denying that the Fuel Cock has deteriorated over time.
The other day, I was worried about the rust in the fuel tank, and although I have removed rust to prevent impurities from entering Gasoline, I am not sure about it, so I will install an additional external type of fuel filter.
Fuel filter
A filter device used in automobiles to filter fine impurities contained in fuel.
It is used for the purpose of removing water, sand, and dust mixed in during refueling, etc., and maintaining sufficient fuel efficiency.
There seems to be a time for replacement, though not up to the air filter.
■ 50,000 km at Carburetor Vehicles
■Injection car with 100,000 km
■Diesel car with 50,000 km
is the standard.
Continued use of the filter past its replacement time will not only clog the fuel filter element and cause a lack of engine output, but will also cause the filter to lose its original function of capturing foreign matter and separating moisture.
[When the fuel filter clogs.
‥
Idling of ▲Engine is unstable.
Engine seems to stop when driving.
▲ Suddenly, Engine stopped spewing.
Failure to start = Engine will not start.
I haven't experienced the clogging of the Filter yet, but considering the distance and age, it should be replaced. 。
In my 90's ESTRELLA, the fuel filter is integrated with the fuel cock and inserted into the tank. That is not so bad, but I wanted to be sure.
I also added an external Type as a spare.
I chose KIJIMA's because it was inexpensive and I had used it before.
The deciding factor was the transparency, which makes it easy to see dirt.
Replacement procedure.
(1) Fuel Cock is turned off
↓
(2) To be sure, Gasoline in the carburetor should also be removed.
↓
(3) Interrupt the fuel filter between the rubber hose connecting the fuel cock and the carburetor.
It is wise to prepare Oil Resistant Hose separately because OEM Hose is not long enough.
↓
(4) Turn on Cook and apply Engine.
Operation check.
Fuel Cock flows by Engine pressure.
after replacement
No problems
They seem to be getting rid of the impurities for sure.
Durability...? I think Large is durable because it is inexpensive and will be replaced with a con stunt.
It is a good idea to have insurance on older Motorcycles.
Installation is also easy.
View detail
Used for MC19 CBR250R
Same standard as OEM, so no problems with installation or performance. View detail
Looks good. Fit nicely.
Compared to the old hose, this is much more flexible. Fitment is good, don't think there will be any issue. I can recommend this hose for replacement need. View detail
No different than OEMs
Purchased due to leaking oil line. I am glad that the quality is the same as OEM and the price is lower. I will buy again when it breaks. View detail
useless
It is useless unless you use a filter. Moreover, if you use it for a long time, the fuel will not stop. Stable Chinese quality. View detail
Fits: YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ450FX, YAMAHA WR250F, YAMAHA WR450F
It doesn't fit
It is not compatible with YZ250FX2023MODEL, though it is compatible with YZ250FX2023MODEL.
I have removed the NORMAL White Ring as per the instruction manual, but it is not attached.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
There was a Gasoline leak.
Previously, I bought it from another company and it was leaking after about 5 years.
I have been driving MONKEY for about 13 years and this was the third time I had to replace it.
View detail
High Quality Hose
This NTB hose is very high quality. It comes in a sealed package and is cut perfectly. I have used this hose as a tank breather for a GSXR 1000 R after EVAP removal. The hose fits perfectly to the tank breather fitting as can be seen in the picture. You get 1 metre which is more than enough for this type of application The price is also very good, especially for the quality. I will be buying this hose again Recommended View detail
Fits: HONDA Shirley 50.
CHALY s Cook was broken.
CHALY I purchased this product because the Cook of Last time I had another CHALY I purchased this product in the first place and had no problems at all, so I purchased it again. View detail
Brilliant, quick delivery
Fast order quick delivery , top quality product I have made another order already . I've ordered a seat for my bike and currently look to purchase other parts ,very good View detail
Rubber hose is consumable!
[How is it used?
Used for SUZUKI/CHOINORI Fuel Hose and Negative Pressure Hose.
I purchased this product to replace the hose that had been attached to my car because it had deteriorated over time.
How was your experience with it?
It is brand new Rubber so it is very soft.
Does this make it easier to get the fuel down? I think it has become easier.
How did it compare to other products?
We selected KIJIMA because it was the one with the lowest gold price, although other manufacturers also offer similar products.
I am glad to hear that it is working fine.
[Points to note]
You will be handling Gasoline, so be careful not to ignite it.
View detail
Fits: HARLEY-DAVIDSON 1/2-inchesHose compatible
Used for Repair!
I replaced it because it was rusty and shabby; I've been using it for about a year now and I'm happy with it, especially since it hasn't rusted. View detail
It is a must for older Motorcycles.
For older Motorcycles, it is a must.
The easy installation and low price are highly appreciated.
View detail
Filter part is pricey
If you want to put a Filter between the Fuel lines, it is difficult to bend the Hose if it is short, but if it is angled like this product, it will be neat. View detail
Fine items are helpful.
Since rubber packing and grommets like this are consumable items, it would be great if you could have a better selection.
I haven't replaced it yet.
I would like to see Fuel Cap Packing for Z1R made soon.
View detail
BRC BRC Fuel Cock
Gasoline capacity was low, so I switched to Reserve and it started leaking.
Is it the life of the O-ring?
It's a 1994, so it's a no-brainer... I'm relieved to replace it... ♪
View detail