Reviews
Normal product quality
Lightech oil cap is a normal quality product. Colour beautiful but craftmanship is normal.Webike provide very good customer service View detail
Fits: HONDA glom, HONDA SUPER CUBC125, HONDA DAX125, HONDA CT110 HUNTER CUB125, HONDA MONKEY125
Oil change
I like that it's all in there so I don't have to worry about replacing it. View detail
Easy to install! I haven't tried it out yet, but I'm expecting a Large lol.
Exhaust System was replaced and After Fire occurred frequently.
Purchased to reduce it!
I am also looking forward to the reduction of embrittlement during blipPingDownshift!
I have not been able to test drive the car after installation for various reasons.
I'm sure it will work and I'll be back for more imprements lol.
View detail
More economical and convenient than buying separately
I purchased this for my Z125PRO.
Filter, Filter coverPacking, Filler capPacking, and DrainGasket are Quantities:The set comes complete with everything you need to replace the Oil Filter, so all you need to do is prepare the Oil of your choice.
I trust the quality of the products because they are made by DAYTONA.
View detail
Fits: HONDA CT125, HONDA DAX125, HONDA SUPER CUB C125
ct125CT110 HUNTER CUB
It looks cool, but it doesn't seem to be very effective. View detail
Fits: HONDA GORILLA, HONDA CHALY 50, HONDA DAX, HONDA BENLY50CD50, HONDA MONKEY
Great Product
This was an amazing product! It fit so well on my gorilla and gave me lots of power, alot more than i thought. It all fitted really well and there were no problems during instalation and quality was great it was not very difficult to install. The item was priced well. Shipping was very fast which was really nice View detail
Look Great!
These fitted really easy and had no problems fitting them to the engine. i was really happy wth how they fitted and they made the bike look really good. View detail
Look Great!
These fitted really easy and had no problems fitting them to the engine. i was really happy wth how they fitted and they made the bike look really good. View detail
Torque raised from 88cc
Used for Torque up 6VGORILLA
The engine was completely loosened, cleaned inside, and started to be installed with a good feeling.
I have removed all the KICK parts from the engine to save weight, so I only push the engine, it just runs toot toot and goes! The carburetor is a Mikuni 26 pie and it is running in very good condition.
It runs easily at 8,000 rpm and even swings up to 10,000 rpm from there, but I'm scared. (I'm afraid of the policeman.) It does not turn for 5 seconds, but it turns well.
The price is moderate and it is just a good product!
View detail
Fits: KAWASAKI 250TR, KAWASAKI CS250, KAWASAKI ESTRELLA, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLA Custom, KAWASAKI ESTRELLARSCustom
Highly reliable product.
It has nothing to do with ride quality, but it is necessary. View detail
Not available
Wire was too short to install in the first place.
I had no choice but to cut OEMWire and rebuild Thailandco and install it.
I would like the base of the Knob to be longer and thicker. When I pull it out, the shaft is not stable and it rattles.
The quality seems very low for the price.
View detail
Fits: YAMAHA WR400 F 5BF, YAMAHA WR400 F 5GS, YAMAHA YZ400 F 5GR, YAMAHA YZ400 F 5BE, YAMAHA YZ426 F 5JG, YAMAHA YZ426 F 5SF, YAMAHA TT250 R RAID 4GY|RR|WA, YAMAHA TT250 R 4GY|RR|WA, YAMAHA WR250F 5PH
It's cosy.
It is replaced once a year, in early spring, and is Repeat.
It is used on a Yamaha TT250R.
It is inexpensive and can be replaced with a single Hexagonal Wrench.
In terms of performance, though, there is not much to experience,
It is safe to use
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS SE
Installation of groundwork
Purchased for Point cover installation.
Since all you have to do is remove and attach it, I think anyone can do it easily.
Only 1 pc of Screw lock agent will be attached, so preparation is necessary.
View detail
Cool
It gives the feeling of an old car. Cool!
The work takes about 5 minutes, including the replacement of KIJIMA's Pulsar Cover.
Screw locker is required.
View detail
Fits: KAWASAKI KX65, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX250F, KAWASAKI KLX250, KAWASAKI D Tracker, KAWASAKI D-TRACKER-X, SUZUKI 250SB
Red purchased as a landmark.
It seems that the dirt does indeed stick to the tip of the Bolt when changing the Oil, but I'm not sure how effective it is. It just makes me feel like the dirt is sticking to me. LOL! View detail
It's a hassle to search and ask for help! For those who want to
In the overhaul of SEROW225, I disassembled the upper waist, so I needed a whole set of Gasket.
I thought that OEM is the best in terms of quality, but if I accumulate a lot of intentions, it will cost a certain amount of gold, and there were some parts that I was not sure whether to change or not, so if I can replace all of them at this price, it is easy.
The quality of the product is absolutely fine. It is totally usable.
View detail
Gasket
Not yet used for SeasonOff View detail
No Color, comparable to OEM Product.
After a while after engine OH, oil seal on Generator side and seal on StatorMount started leaking, so I replaced them.
The OEM oil seals that started leaking have only been used for 6 years and 10,000 km since the last OH, and I've treated them with care, but it happens.
The thing itself could be installed without any problems and the leakage was contained.
At the time of purchase, it was much cheaper than OEM, not to mention cheaper than buying a UniversalOil seal, so I was worried.
Not only for OH, but also for normal use, the leakage will suddenly appear one day, and since it is easy to replace, we recommend Stock as a precaution.
View detail
Regular headRepair Parts
Although the Mukawa Regular head has been discontinued for quite some time, it is helpful that Repair Parts are still available.
I think I can still extend the life of my Regular head. (Lol)
View detail