Reviews
Headlight guard for CROSS CUB
Headlight guards for CROSS CUB are available from other manufacturers, but we purchased this one because it is the most stylish and does not interfere with the function of the Light.
The installation must be done in accordance with the Instruction Manual by loosening the bolt securing the headlight one side at a time, otherwise the angle of the headlight will change and it will be difficult to readjust the angle.
Attach the Acrylic plate to the GuardBody yourself, but be careful not to tighten it too tightly as it may break.
The other item in the photo is MORIWAKI HornGuard B TypeSilver 03810-20Z01-00
View detail
Fits: BMW R1200GS LC Water Cooling, BMW R1250GS Adventure, BMW R1250GS, BMW R1250GS Adventure, BMW R1250GS
?-? Cleaning is easy.?-?
The GS Headlight is a foldable, easy-to-clean headlight. View detail
Fits: HONDA TRAIL125, HONDA CT125, HONDA CT125, HONDA MONKEY125, HONDA MONKEY125
Only full cover headlight guard available
As aslways Zeta hit it out of the park, the only light guard that actually covers the entire headlight with a piece of arcylic bolted to a nice alloy frame that enables unobstructed view of the headlight, but 100% protected. The others are just a bit of thin steel wire/tube that will not stop rocks or similar to hit the headlight. Installation was super easy !, also works with all the other Zeta/DRC accesories. In my pics you can see it with the Zeta ADV windsheild View detail
The accuracy of the OEM Product and the atmosphere of the Parts themselves are good!
Compared to other brand products made in China, this is an OEM product, so the accuracy is number one! If a small rock hits the surface, it will not prevent damage to the light surface because the gap is too large. And the price may be high. Still, it is self-satisfaction to put OEM on the product. View detail
Unusable Item for European manufactured Zoomer
The Item TOKYO PARTS Headlight Guard [TPZM-OP001] HONDA doesn’t fit on the light (lens) frame of my HONDA ZOOMER (NPS50, AF66) produced in Europe. The diameter of one of the light (lens) of my ZOOMER motorbike is about 13 cm. The diameter of one of the Headlight Guard item is about 12.5 cm. Considering the two light (lens) of the complete frame, the difference in diameter sums up to over 1 cm. That difference in diameter’s size between the Item that you are selling and my ZOOMER model’s light (lens) make this product unusable. The size difference needs to be advertised in the product detail section of this item at least for European customers, probably also for the Ruckus model i.e. American customers. If not, the product detail information is actually misleading. View detail
SP TAKEGAWA Headlight Guard Review
Suitable for CT125 model. I like it because it’s not clunky. Installation is not difficult.
You can think of it as having no guard role. Just think of it as investing in tuning.
Since it is not thick, I don't think it will be significantly involved when installing the front carrier and windscreen.
The price is a bit expensive, but it's well worth it. -------------------------------------------------- -------- Suitable for the CT125 model. It is good because it is not clunky. It is not difficult to install. There is no guard role. You can just think about investing in tuning. It's not thick, so I don't think it's not much involved when installing front carriers and windscreens. The price is expensive, but it's worth it. Powered by Google Translator
View detail
Fits: HONDA MONKEY125, HONDA CT125, HONDA MONKEY125, HONDA DAX125, HONDA MONKEY125, HONDA CT125
Takegawa Headlight Guard
[About quality and texture] SP Takegawa's products are always of good quality. [Difficulty of installation] If you refer to the manual, you can install it in 10 minutes [About shipping and packaging] The delivery was fast, and the packaging came safely. [Any concerns, cautions, or advice when purchasing] The appearance changes as you install it, so buy it according to your preference. View detail
This styled headlight guard compliments modern additions
About quality and texture, I can confirm that the quality is great and that the material used is aluminum with a mixture of silver and black anodised finishes. About the feeling of use, Some people may not like the modern style of this headlight guard but I was happy to take some of the original looks away from this bike with the key changes like the fender eliminator and exhaust system, so this styled headlight guard compliments those modern additions. Products to buy together, A part that goes a long way to tidy up the rear end is a fender eliminator and while adding a modern looking headlight guard a modern looking fender would be ideal to also add to your cart. Difficulty of installation, I can say the fitment of the headlight guard was very easy due to the simple nature of the install and easy access to the three mounting points to secure the guard with the included hardware. Cost performance and comparison with other products, The pricing of the product is good. You receive a headlight guard made from quality and light weight materials. There are cheaper options from other brands but non with this modern type of styling. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Recommended for those who don't want to do too much tuning.
In the case of CT125, there are many accessories that need to be installed on the front, such as windscreen, handguard, handlebar, front carrier, etc.
Then, you should also take into account that it becomes heavier overall.
Recommended for those who want to do simple tuning. However, the price is expensive.
I don't know if it will be of much help to those who drive off-road as the headlight guard area is very exposed, but it is very good for exterior decoration. -------------------------------------------------- -------- In the case of CT125, there are many accessories to be attached, including windscreen, Hendguard handlebar front carrier, etc. in the front section. Then you should consider that it will be heavy as a whole. Recommended for those who want to tune simply. However, the price is expensive. If you are off-road, you may be exposed to the headlight guard, but it may be very helpful, but it is very good for exterior. Powered by Google Translator
View detail
Installation is easy, but ….
It is easy to install but … I drove it at night and it is Lighter and darker than expected.
Therefore, it may be better to install it only when going on forest roads or the like, rather than putting it on at any time.
View detail
This headlight Guard is half the size of my zoomer/ruckus headlights and too small.
The guards do NOT fit zoomer/ruckus and are way too small! I am incredibly disappointed that these in no way fit or cover the stock headlights for my Zoomer/Ruckus. Very misleading pictures. View detail
It prevents stone splashing when off-roading and is fine as a dress-up.
It prevents stone splashing when off-roading and is fine as a dress-up.
Kijima products have perfect finishing details.
I hope you use it well for a long time haha
But the parts are all too expensive.
Still, there is a reason to only use Kijima.
I need to go with a full set of my Hunter Curve to Kijima ---------------------------------------- ------------------ It prevents stone fried during off -road and is fine with a dress -up. Kijima products are perfect for finishing I want to use it for a long time But the price of parts is too expensive Still, there is a reason to use only Kijima I have to go to the full set of my hunter curve too. Powered by Google Translator
View detail
good buy
I'm glad because I wanted a little bit of martial arts, although the round eyes of SEROW are also good. View detail
Fits: HONDA CL250, HONDA CL500, HONDA REBEL250, HONDA REBEL500, HONDA REBEL1100
SP Takegawa SPTakegawa Headlight guard
appearance
The Wilde feeling was up and the texture was nice.
View detail
Dirt-style Custom
It is easy to install. It is easy to install. It is the perfect item to distinguish yourself from others. View detail
Fits: HONDA CL250, HONDA CL500, HONDA REBEL250, HONDA REBEL500, HONDA REBEL1100
Parenthesis is good. Good texture.
I bought this product not to protect the headlight lens, but to eliminate the rebel feeling around the headlight area. (Personal opinion) I have installed several SP Mukawa products in other parts, but SP Mukawa products are of high quality. View detail
Looks good
The Headlight Grill frpm Hepco&Becker I purchased arrived a bit deformed, squashed (happened during shipping to my destination?) Before installing it, i had to straighten it out to fit the headlight accordingly. All in all a solid piece and it looks good. View detail
Satisfactory in appearance and function, but price is a little high
[How is it used?
It attaches to the Stack pipe and guards the Headlight. I do not often drive on forest roads, but I installed it to prevent insect Attack from getting dirty and insect carcasses from getting caught in the gap between the headlight and the Attack. I think it also has a dress-up effect, although it is not to my taste.
Was the one you received as per Image?
The Polycarbonate Guard is also not too bad, but not too bad. For this gold price, I felt the quality was not so good. For this price, I would like to see a better Bracket.
Was the installation difficult?
If installed according to the Instruction Manual, even beginners should be able to install it without problems.
However, it says that no one without a mechanic's license should perform the installation...
I think it is good that it can be installed on the Stack pipe, but it can be moved back and forth a little and installed in the desired position.
The Instruction Manual warns that over-tightening of the Bolt may lead to cracking, "Too tight." It would be nice if the Torque of tightening was listed, but why isn't it? It would be nice if the Torque of tightening was stated, but why isn't it?
How was your experience with it?
It is good to see that insects are hardly getting into the gaps in the Headlight anymore.
I am glad that wiping off the bugs is easier, but of course it is harder to do when cleaning the Headlight itself.
I have never seen anyone else wearing it, so I think it is good for those who are looking for something different and for those who are looking for a dress-up effect.
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
Pad looks good and functions well, but the texture was not so good.
I thought it would be more solid at this price.
It could be that they are cheapening the product for lightness, but if that is the case, why not make it cheaper?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Instruction Manual states the following
Do not attempt installation unless you are a qualified mechanic."
"Any inquiries regarding installation should be directed to the mechanic who performed the installation, not to the purchaser."
From Manufacturer's point of view, I think it is listed to avoid responsibility, but how many of the people who buy these are qualified mechanics?
I think that the probability of accidents due to installation defects is almost nil for this product, but not at all, so it may be inevitable to write this, but I don't feel good when I see the Instruction Manual after purchasing the product without stating this in the product description section. I guess. What about knowing about it after you buy it?
The functions and appearance are good, but I can't give a good rating overall because of the texture, price, and the way the Instruction Manual is written, but I can't help but recommend it. I think it is a good buy for those who go touring in Hokkaido or are concerned about insects.
View detail
Fits: KAWASAKI zrx1200daeg [daeg]., KAWASAKI zrx1200daeg [daeg].
Novel, Style
I think it looks good on ZrX1200 DAEG. The tapping screw is not included, but it is removable. The drilling work is a little bit strange.
The installation was a Large oddity, but the end result was satisfactory.
View detail
Dress-up purpose.
Fixing is done by removing the OEMBolt from the Blinker Bracket and fixing in two places with the supplied bolt.
The headlight lens is in close contact with the headlight lens, so it will not gap up and down, but be careful if you are concerned about scratches.
View detail