Reviews
Carbon
Scratches on the Black colored Tank are inevitable, so install it before it gets worse.
It is easy to apply with double-sided tape.
The seam between the Tank and Seat is also rounded off so that it does not look out of place.
However, the part without Tape is creaking" when pressed, so it might be better to add more Tape.
Some edges are not able to follow the subtle curvature of the tank, but I don't mind.
View detail
Circuit support
I bought it to run Circuit with MOTARD.
Gasoline spillage can be prevented in the event of a fall.
The aluminum bubbles are anodized and well designed.
View detail
Grip is good
Grip is good and can be held properly.
Double-sided tape does not have a bad bite, but the resin part tends to peel off easily due to temperature changes, etc., even if the tape is degreased properly.:When applying to Unpainted resin, it is better to use strong Double-sided Tape for Vehicleetc.
The Cut surface is standing up and may catch on the seams of the Pants. I used Cutter to cut off the corners.
View detail
Just right!
For me, it is not too large and not too small, just the right size. The installation can be done by anyone since all you have to do is stick it on, and the price is reasonable, and the change in appearance makes it a good value. View detail
I should have bought this one from the beginning.
I have been using the same manufacturer's vehicle-specific product, but I wanted to put a little more on the cowl to prevent scratches.
Another Quantity of vehicle-specific items previously:I had bought a set and installed it, but I thought it was a waste because I had some left over, and this time I had to replace the cowl because of an accident.:I was about to buy Set when I happened to find this product and bought it.
If I had noticed this last time, I would have bought it because it is less expensive and contains three types of Large size.
View detail
It needs to be shifted a little and put on the 2024 CBR600RR.
2024 CBR600RR compatible products (?) but it hits in the search results as
The shape of the knee side is slightly different, so it needs to be shifted and applied.
The glue was coming off a little bit, but other than that, I'm satisfied!
View detail
It's effective
[How is it used?
I use it every day.
Was the one you received as per Image?
It is a little larger than I expected, and when I put my knee grip on it, it seems to cover the entire underside of the tank.
Was the installation difficult?
All you have to do is put it on and you're done in five minutes.
How was your experience with it?
Eliminator can be recommenedation for those who do not want to scratch the underside of the tank because of the shape of the tank.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
The adhesive strength is quite high, so once the adhesive side touches the Tank, please do not expect it to come off.
View detail
Fits: HONDA CBR650F, HONDA CRF250 R, HONDA VFR800X, HONDA CBR400R, HONDA CRF1000F Africa Twin, HONDA CBR650R, HONDA CBR1000RR, HONDA CB650R, HONDA CB650F, HONDA CB400SF, HONDA CB1300SB, HONDA CB125R, HONDA CB1100RS, HONDA CB1000R, HONDA 400X, HONDA CB1300SF, HONDA VFR800F, HONDA GROM-II, HONDA CRF250L, HONDA CB400SB
Good pad
It's a really good product. Both the finish and the design are excellent. I bought the multiba twice. Thank you for your prompt delivery. I recommend this product to others, too View detail
Used for Tank on Ninja1000sx
[How is it used?
The tank of the Ninja 1000sx is wide, so when touring long distances, the sitting position is inevitably shifted to the front. When I was riding Z650ABS, I used the same manufacturer's standard (black), but I was concerned about the floating of the glue, so I changed to SILICON this time.
Was the one you received as per Image?
Color is Color:It is so close to Gray that when attached to Black Painting, it looks like it is floating. It is not so bad once you get used to it, but I would have preferred a stronger black look.
How was your experience with it?
Functionality is fine. It has a firm knee grip.
[Points to note]
The location of the paste is unknown and must be confirmed on the ManufacturerHP.
How did it compare to other products?
I feel that the texture is not as good as the company's Standard, but it is supple and does not seem to peel easily.
Requests, etc. to Manufacturer
I noticed a lot of White paper dust on the product when I opened the product. Perhaps dust from clothes will also be a concern in the future.
View detail
Fits: DUCATI SCRAMBLERIcon, DUCATI 1299 Panigale., BMW R1200RS, BMW S1000RR, SUZUKI GSX-S1000, SUZUKI GSX-S125, SUZUKI GSX-S750, SUZUKI GSX1000S KATANA, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1400, SUZUKI GSX250R, SUZUKI ST250E Type, TRIUMPH STREETSCRAMBLER, SUZUKI VANVAN200, SUZUKI BANDIT1250, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM250, SUZUKI GRASS TRACKER BIGBOY, SUZUKI DL1000 V-STROM650, SUZUKI Intruder Classic
Cute.
Pad thickness is just right and cute.
It would be better if it were cheaper.
View detail
The design and shape are good, but the gap for the tank pad is unavoidable.
The design and shape are good, but the gap for the tank pad is unavoidable. Although I purchased the product with an understanding of this gap, it bothers me a little. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Tank Cover (GSX1300R HAYABUSAI type) Twill Weave Carbon
The product is aesthetically pleasing as a twill weave carbon and is well finished. The area of the cover is larger than that of a general stick-on cover, and the appearance of the custom parts is eye-catching, and the practicality of the cover is also reassuring, as it frees the user from the worry of damaging the tank with Belt Bracket etc. On the other hand
Urethane for surface protection [Color] The drawback is that Clear painting must be done by itself. A small amount of liquid Sauce still occurred.
View detail
The texture of Carbon is beautiful!
I bought the NINJA2 Helmet 50R for Gymkhana from a friend to cover up the scratches on my tank, but I was pleasantly surprised! The carbon texture is so beautiful that I can't help but look at it when I'm waiting at a traffic light …! It is hang to degrease properly in order to fix it! The carbon texture at such a low price! It is the best! View detail
Parenthesis good in standard
At first, I thought about using a pad without a pad, and I also thought about a design I found in Jungle, but I decided on this one because of its quality and standard design. When I put it on, I found that the adhesion was weak at the curled part and it started to peel off, so I temporarily held it in place with tape. If I had cured it right after applying it, it might not have been so bad. View detail
It's a Universal Product, so there's no choice.
I would like to see a little more length, but the minimum area is covered, so that's good.
Even if applied properly, Air is hard to remain and has sufficient adhesive strength, but the color is not colorless, so Black may be less stressful.
View detail
Fits: TRIUMPH SPEED TRIPLE 1200 RR
Cheap ????.
The color may be translucent or Quantity:Pair (for Left and Right) The quality was disappointing for the difference in size and delivery time.
If you can afford it, buy it at a special price, it is a good one to prevent slipping.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S
It's faded, but I think it tastes good.
BlackI purchased it (2012) and it faded before I knew it.
I am using it on a ZrX1200R, so it is a Bronze color, and this is better suited for it.
View detail
Purchased as a spare
The last one I purchased was quite scratched and worn, so I repurchased it as a spare. This time it is twill weave.
We initially waited 8 months but received it in 6 months.
After all, delivery time for carbon parts is usually around 6 months...,
View detail
Genuine Yamaha Tank Pad (3 piece) for YZF-R1 2021
I have said this before and this is something every fuel tank should have on them from factory. Fortunately, no scratches to cover on this beautiful tank. No need to tempt fate so I just thought it best bet for now to get a tank pad. This will help stop any scratces and abrasions from the jacket etc. The correct tank pad was not hard to find, I just filtered the manufacturer and then model of bike and there were a couple to choose from. I deceided on the genuine Yamaha one as it will fit as it should do with it being made for this bike. The cost was not too bad actually and better than I had seen for sale locally. With a couple of other tank pads for other bikes, I had them all shipped together via EMS. EMS just do what they say and get your order to you quickly. Mine arrived 5 days after the shipping date which is perfect. The entire order was neatly packed in the box, the tank pads were all kept nice and flat so there was no distortion which could have been a problem when fitting. The tank pad came in a Yamaha packet and was neatly presented. The pad itself feels very nice and smooth but does have a bit of friction due to the materials used. Fitting was straight forward and went on without issue. As this is a 3 piece tank pad, you should really mock up the fitting beforehand so you know where it will sit once you remove the backing. Easy if you take your time. No one wants to have a constant reminder that they messed up with a wonky set. Pleased with the purchase and hopefully, this stops any future scuffs from happening with my jacket zip. Thanks Webike View detail
In my opinion, it's Psycho!
It was not for YAMAHA's XSR155. (For SEA BASS GSX) I was looking for a new product, but the red letter "R" had a good parenthesis, so I bought it and put it on the wall. I bought it and put it on the wall because it was red and the letter "R" had a good parenthesis. I'm glad I bought it! View detail