Reviews
Fits: YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith)
Easy to install
I had been interested in these Parts for a long time, but I wish I had bought them earlier because they are easy to replace and functionally the best in terms of cost performance.
I don't ride much, but I hope that Spring won't be damaged and that it won't affect Seat and the body of the car.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
Exchange from OEM
I am satisfied with the cleanliness!
I like the replacement from OEM and the various Parts that are available!
View detail
It won't be as good as you think, but it will be cool.
I bought a used DR-Z400SM seat with a low seat and a cutout, so I installed this OEM high seat.
I don't know about other Seats as I have never sat in them, but they seem a bit expensive for the effect.
When it arrived, the first thing I thought was that it was incredibly thick and the meat was quite firm to the touch.
I thought this would improve my bowels in a big way, but when I actually sat down, the flesh was surprisingly hard and I didn't feel much change.
It's probably a little better, but it's still a triangle.
It's been about 2 years since I installed it and there is no softening after sitting on it or anything like that.
Also, the raised seat raises the visibility considerably, so a lower car can see deeper into the car, [Color] If it is a van without Smoke attached, it is quite easy to use because you can see the back of the van at the window Glass waist.
However, the footing is naturally worse, and if you are not careful, you may fall down more often, so it is better to ride with care.
And most importantly, the high seat will look much better and more photogenic, just like a MOTARD.
It's not an improvement over what I expected, but it's cool, so let's call it good.
Maybe it's just the one I bought, but I had quite a bit of trouble with it even though it was OEM because the screw holes didn't line up, whether the product was out of alignment or the body was bent.
View detail
Grip force is increased and can be felt even in city driving.
[How is it used?
I bought this seat as a for re-covering because the normal seat for WR250R that I bought used was not in good condition.
The vehicle itself was also purchased used, but the Seat is a SPIRAL Complete Seat, the same as the Seat cover I purchased this time. With Stages Seat I found it difficult to use, so I bought a second-hand Normal seat.
I had already heard that someone I know uses this product and had heard reviews that the grip of the Seat Cover is good and easy to use, so I had no hesitation in purchasing it.
How did you like it?
As Mr. Manufacturer claims.
The original non-slip material is used, which is more grippy and durable than the existing Seat cover in a larger width.
Different materials are used for the top and sides of the cover, allowing for excellent machine control. As it says, it grips firmly when riding and improves the hold of the vehicle body.
My personal driving skills are low and I only play with low specifications for walking on forest roads and playing in the mountains, but the Seat's grippy feel is dependable, and I expect the Seat fabric is thicker and more durable than the OEMSeat Cover.
How did it compare to other products?
I can only make subtle comments because the only comparison is SPIRAL's with Stages Complete Seat, which was replaced in a short period of time, and the Normal Seat, which has a hardened Seat Cover. The Seat Cover itself is soft and elastic, so it is very good for a few hours of riding without getting tired. (Seat shape is NORMAL, so the surface of the buttocks will be sore after a long run.) 。
In my personal opinion. Seat CoverSingle Body price is a little high?" I think it's a good idea, but I'm not sure if this performance is enough to convince me. I think it is acceptable for this kind of performance.
[Points to note]
The seat cover itself is sewn three-dimensionally, so it is easy to put up, but the reverse side of the seat base of the WR has a rather complicated shape, so there are many parts where it is difficult to put up the tucker.
As I mentioned above, when reupholstered with STD Shape's Seat, the Siri will be sore after a long ride! (Due to the nature of OEMSeat) If you want to avoid this, you can make the seat wider or install shock-absorbing materials.
Purchasing a Complete Seat may be an effective way to do this.
Other items that would be helpful
The deciding factor in the purchase
Performance of the Seat fabric itself.
The Large was inspired by an acquaintance of mine who was using the same product.
[How is it used?
We use it for mountain play and Flat forest walks.
It is a little too heavy for me, so I don't use it for difficult Attacks, but I really enjoy Flat forest roads.
【Included Parts:presence or absence】.
SeatBody and a simplified Instruction Manual are included.
[ITEMS TO BUY TOGETHER
Tucker& needle with short legs to stop Seat if this is your first time reupholstering. (core? ball?) If you want to make it waterproof, use Vinyl sheet. (Garbage bags are also acceptable) The Coking agent may not be necessary since the sewing is done by Crimp Type.
Opinions and requests to Manufacturer.
I think it would be great if the slightly older Minor car models etc. could also be expanded into a lineup.
View detail
Change the look
The best part that change the look of bike, sporty and cafe racer style, easy install by your self. Everyone stop me in road to ask about motorcycle model and the beauty look View detail
A strong ally for those who are concerned about footing.
[How is it used?
The VSTROM1000 is not very well known in Japan, but it is popular overseas, so it is inevitably a body for a popular country (although it is also an Adventure type).
As I was born in the Showa period and do not have long typical legs, I find it quite difficult to keep my feet on the ground. Low seat. They have prepared a
'Soft front and rear suspension would make it a little easier to sink into the ride.' I had naively thought that I would be able to get a low seat for VSTROM, but I ran into a wall of reality and purchased a low seat for VSTROM using my hanghang and points I had saved up at Webike.
How was your experience with it?
"Sticky to the heel." The stability when stopping has improved dramatically as 70% of the bottom of the Riding shoes are now installed (only about 20% are installed in the standard Seat, which is a toe-up state).
When you feel a sense of security when stopping, you can relax your mind and concentrate on driving without worrying about standing in traffic jams or when driving at low speeds when you get lost, which ultimately leads to safer driving.
Prior to purchase, low Pride was in the way. Let's just try to get by with the standard Seat." I had a feeling that the low seat would be a good idea, but after the low seat was installed "The ridiculousness of increasing the RISK of a fall by being too skinny." I am keenly aware of the dangers of
How did it compare to other products?
This is a comparison with the standard Seat, but according to the Manufacturer's announcement, the seat surface will be 30mm lower.
The SIDE portion where the thighs meet the low seat has also been shaved, so you can actually feel the effect of more than 30mm when you straddle the seat.
The seat cover is the same as that of OEMSeat, so there is no improvement in texture, but there is no sense of discomfort.
[Points to note]
As mentioned above, it is the same Quality as the standard Seat. Poor installation." What a surprise!
If you are tall enough to put both feet on the ground even in the standard seat, the low seat may make you feel a little cramped around the knees (not so extreme).
Other items that would be helpful
The deciding factor in the purchase
The OEMOption is a variety of products with improved footing, the same level of quality as standard Seat, and a lower price compared to other brand products.
[How is it used?
The ease of city driving, day trips, long tours, and long-distance high-speed travel can only be achieved with a LargeEngine Displacement Volume vehicle.
【Included Parts:presence or absence】.
This is for one low seat.
VSTROM1000 does not have a Tandem belt because the Rear Carrier (with Side grip) is Standard Equipment.
[ITEMS TO BUY TOGETHER
Still, if you have a footed government proposal... Lowdown Link." Let's also consider
Opinions and requests to Manufacturer.
Strong ally of User OEMOption." Please continue the lineup as long as you can.
View detail
SEA BASS parts are cheap and helpful.
[How is it used?
I ordered a low seat for my long-time favorite DJEBEL250XC because it was available at Webike (this was around 2015).
I have a 2006 DJEBEL, so originally the tank was gun metallic and the Seat was red on the seat and black on the side, but I got a used blue metallic tank from around 2000 and the color scheme of the Seat didn't match. I got a used Blue metallic tank around 2000. Buy a SEA BASSOEMLow seat anyway." I ordered it because I thought it would be a good idea.
How was your experience with it?
When I purchased it, the color scheme Pattern was not the same as the color scheme Pattern in Webike's product introduction image, but the color scheme Pattern was like the attached image.
I don't remember how many centimeters I dropped, but just going back to this product improved the footing quite a bit because the standard Seat is thicker.
It is an OEMOption product. "luxury" It is not related to the Seat Assembly, but the quality is good, and it was an easy and gratifying Seat to purchase at a price that was less than 20,000 LARGE range in spite of the Seat Assembly's price.
SEA BASS is a manufacturer that understands the needs of the common man.
How did it compare to other products?
I can only compare with the OEM standard Seat, but I wonder if the 10mm variant has a lower seat surface?
In the standard Seat A little footing anxiety. If you are a person who has a low seat, the low seat will solve your problem! The low seat improves the footing of the driver.
For those who still feel uneasy even after changing to this Seat, I recommend changing the LINK fixing part of the Rear shock to lower the ride height.
DJEBEL250XC is an Other Brand Product Lowdown Link." Bolt fixing holes without purchasing "Low" When "high" The front fork can also be shortened in overall length without spending gold. It is a very good Motorcycle though it is not so expensive.
[Points to note]
Since it is the same Quality as the standard Seat Holt holes did not line up when installed." What a surprise!
If you are tall enough to put both feet on the ground even with the standard seat, the low seat may make you feel a little cramped around the knees (though not so extreme).
It has been quite a few years since the DJEBEL250XC was discontinued (2007), so it could be discontinued at any time.
If you are considering purchasing, make a decision as soon as possible.
Other items that would be helpful
The deciding factor in the purchase
The improved footing, the quality of being an OEM, and the low price.
[How is it used?
It can be used for various situations from city driving to long touring, and even for playing in the mountains. I find myself riding in these cars all the time." I am on it as much as I can say.
【Included Parts:presence or absence】.
This is for one low seat.
DJEBEL250XC does not have a tandem belt because the Rear Carrier (with handle) is Standard Equipment.
[ITEMS TO BUY TOGETHER
Not particularly
Opinions and requests to Manufacturer.
Please continue the Lineup until the New Model of DJEBEL250XC is introduced.
View detail
It did not suit me.
[How is it used?
It was installed from the beginning on a used WR250R that I bought about 10 years ago.
The premise is that the previous Owner had a short Rear shock ride height adjustment Quantity:I was not sure if it was the Seat or the Shock adjustment that made the footing better (there was no Normal seat when I bought the car).
The car was delivered at Motorcycle shop and on the way home. I want to replace Seat." I sold it after I got a used Normal seat.
How was your experience with it?
Seat surfaceFront is depressed like a road motorcycle, which makes it difficult for the rider to move the front and rear seating positions while driving in a seated position, making it boring to ride in an off-road type vehicle.
Since you have purchased a Dual PurPass vehicle, the front and rear Quantities:Pair (for Left and Right) I am a person who wants to enjoy weight transfer by freely changing the seating posture to Seat not needed at all." It was
I later learned that the Seat has been changed from the Sponge inside, but since I sold it after purchasing the vehicle without examining this product for the reasons mentioned above, I have no idea about the afternoon ride over long distances, etc.
I have no good or bad impression of the Seat Cover. Normal It was
If I'm honest, I'd say it's a Seat for city driving or touring out with an on road motorcycle.
How did it compare to other products?
I would compare it to the OEMSeat that replaced the remains of this Seat, but the OEMSeat was better for me.
I'm sorry that I don't quite understand the advantages of this Seat, but if the Front seat is lower than the OEMSeat... It is suitable for people who are not comfortable with the footing of a normal seat." It may be.
[Points to note]
If you try to move the seating position on the seat while driving, it is caught because the seat surface is not flat, but it is not so much that it interferes with driving, but in my case it spoils the fun of driving, so the normal seat was sufficient.
Other items that would be helpful
The deciding factor in the purchase
As mentioned above, it was already installed when the vehicle was purchased and was delivered as is.
I found out the price of the product from Webike. High! I thought.
[How is it used?
We use it for mountain play and Flat forest walks.
【Included Parts:presence or absence】.
It was attached to a used car, so I don't know much about it, but it looks like SeatBody only.
[ITEMS TO BUY TOGETHER
Not particularly
Opinions and requests to Manufacturer.
I think it is wonderful that there is a wide variety of lineups to meet various needs.
View detail
Easy to reupholster.
[How is it used?
We received an XR250 in a very dilapidated state and are in the process of restoring the functional parts and exterior.
It has been a long time since the production ended, and there were not many choices of Seat fabrics for different car models, but ALBA had a lineup for XR, which was a big help.
The purpose of use of the vehicle was unclear because it was given to me unexpectedly, but I was told that a junior friend of mine who enjoys playing in the mountains might be able to ride it, so I decided to use it for both daily riding in the city and playing in the mountains. A normal passenger vehicle." I tried to keep the following in mind.
How was your experience with it?
Even though it is a car model specific Seat Cover, is the price slightly higher than ALBA's other Seat Covers? I thought so, but there are not so many choices...
The construction was solid and we were able to finish the seat upholstery without any problems.
The thickness of the fabric seems to be as thick as OEMSeat, so durability can be expected as long as there are no protrusions or blades to cut into the fabric.
Perhaps because the fabric is too new, the surface was slippery during the test ride after the work was completed, but we believe it will settle down as we ride it.
How did it compare to other products?
Nothing of note, good or bad. OEMSeat Cover parallel." It's like
I have no complaints as this is exactly what we were aiming for with this Seat reupholstery job.
[Points to note]
This is an easy task compared to Universal Product's Seat upholstery since the product is three-dimensionally sewn for the car model. In fact, it may be more troublesome to remove the old Seat Cover.
As a personal tensioning method, I first fasten the front and back of the Seat with Tucker, loosening the tension a bit.:Pair (for Left and Right) Quantity at the time of the stakeout of the:Pair (for Left and Right) The tip of the sponge should be stretched evenly so that there are no gaps in the sponge, and the tip of the sponge should be stretched along the seat sponge without wrinkles to obtain a satisfactory result.
Other items that would be helpful
The deciding factor in the purchase
As inexpensive as possible. It just feels normal." We chose the Seat Cover of
It is also important to be able to use the points you have accumulated at Webike.
[How is it used?
We consider that it can be used without any problem from playing in the mountains with friends to day-touring.
【Included Parts:presence or absence】.
A piece of skin for SeatBody, a tandem belt, and an instruction manual with simple tensioning instructions are included in the quantity.:Set
In this case, the Rear Carrier has a handle, so the Tandem belt is not attached.
[ITEMS TO BUY TOGETHER
Tucker (Stapler's slightly larger size) to hold the Seat fabric in place on the Reverse side of the Seat Base, and a shorter core for the legs (because the longer legs would poke through to the surface at the SIDE of the thin Sponge).
If you want to emphasize waterproof performance, you may want to cover the area between the SeatMaterial and the outer skin with Vinyl before applying it. If you do not want the skin to gap while running, it may be better to apply directly to the sponge without using Vinyl, and you should prepare a SiliconCoking agent to apply to the reverse side seam of the SeatMaterial.
Opinions and requests to Manufacturer.
If possible, several color variations would make it easier to match the car body color.
We would appreciate just having a set up for each car model, so please continue to sell as much as possible.
View detail
Fits: HONDA CT125CT110 HUNTER CUB
A satisfying, if pricey, product.
Installation is easy and very effective.
It is very useful when using the Helmet holder and when refueling.
It's not cosmetically expensive, but it's one of my top 3 custom parts!
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE
I don't know who to complain to!
Only one point of dissatisfaction.
I've got a bad one - I've got a bad one.
(o^^o)
View detail
Fitting is also good
I used to install the Blinker using the hole in the Seat Bracket for Side Cover because I use Posh's Blinker kit, but I chose this product because it was a type that can be installed on the Side Cover. The Blinker can be re-installed in the same position. The footing is better than the OEM Seat and it does not slip anymore. View detail
Fits: SUZUKI GSX750S1, SUZUKI GSX750SS, SUZUKI GSX750S2, SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX750S1, SUZUKI GSX750SS, SUZUKI GSX750S2, SUZUKI GSX1000S, SUZUKI GSX1100S
KATANARestore
I bought it used and the OEM Parts were badly rusted, so I replaced them with new ones to prevent rust. It looks good. View detail
Fits: YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA XT250X, YAMAHA XT250X
The price is cheap and easy to put up.
[How is it used?
I was looking for a for re-covering skin for my SEROW250 Seat Cover, which I bought used for playing in the mountains, because it had become hard and slippery due to age-related deterioration.
I was searching Webike because I don't want to use expensive Seat fabric since I fall down every time I go out to play in the mountains, and I found a lineup of Seat fabric for SEROW250 at NTB, which sells various compatible products at low prices.
2,482 yen at time of purchase (tax included) I ordered it thinking that at this price I would be able to give up if I went out to play in the mountains and was unlucky enough to tear the Seat after a few falls.
How did you like it?
The product we received was a little thinner than the Yamaha OEM, but the fabric was thick enough. The triangular-shaped front part of the seat was sewn three-dimensionally, and the quality of the product was very good.
Remove the OEM Seat Cover, place the NTB Seat Fabric on the Seat Base, wrinkle it lightly, and secure it with a Tucker. (If you have experience with Seat reupholstery) Seat can be reupholstered in Beauty with relative ease.
It is not an OEM fabric crimp type but a sewing type fabric, Seat reupholstered." It has so much QUALITY that you would not even notice it if you did not say so.
It also seems to be durable, so as long as it is not cut by excessive protrusions or blades, it will be as durable as OEM.
Because the fabric is newer, it is naturally more flexible and less slippery while riding. If you are not sure which one to choose when reupholstering your seat, NTB is a good candidate. Normal Fit to
How did it compare to other products?
SEROW was a popular vehicle and several companies had Seat Covers on the market, but NTB's low price was overwhelmingly competitive.
Universal Product. However, it would be difficult for other manufacturers to sell a 3D sewn product for SEROW250 at this price.
[Points to note]
Since the product is three-dimensionally sewn for the car model, it is an easy job compared to Universal Product's Seat Cover. In fact, it may be more troublesome to remove the old Seat Cover, and that is how easy it was to apply this product.
First, fix the front and rear of the Seat slightly loose, and then set the Quantity:Pair (for Left and Right) When pasting the "One Side", it should be pasted along the "Seat sponge" without wrinkles so that the "One Side" will not be pulled too much.
Other items that would be helpful
The deciding factor in the purchase
As I wrote above in a scattered manner, the shape is three-dimensionally sewn for SEROW250.
On top of that, the price is low.
[How is it used?
I use it in all kinds of situations, from riding around town to playing in the mountains to touring.
Seat grip is good and very comfortable.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. and Instruction Manual for simplified application is available in Quantity:Set
No Tandem belt (because the OEM SEROW does not have Belt) 。
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
It is a very good Seat fabric and I hope to use it again next time.
If possible, even if the price is a little higher, it would be more attractive if the seat surface is black and the SIDE is silver.
View detail
Fits: YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA XT250X, YAMAHA XT250X
The price is cheap and easy to put up.
[How is it used?
I was looking for a for re-covering skin for my SEROW250 Seat Cover, which I bought used for playing in the mountains, because it had become hard and slippery due to age-related deterioration.
I was searching Webike because I don't want to use expensive Seat fabric since I fall down every time I go out to play in the mountains, and I found a lineup of Seat fabric for SEROW250 at NTB, which sells various compatible products at low prices.
2,482 yen at time of purchase (tax included) I ordered it thinking that at this price I would be able to give up if I went out to play in the mountains and was unlucky enough to tear the Seat after a few falls.
How did you like it?
The product we received was a little thinner than the Yamaha OEM, but the fabric was thick enough. The triangular-shaped front part of the seat was sewn three-dimensionally, and the quality of the product was very good.
Remove the OEM Seat Cover, place the NTB Seat Fabric on the Seat Base, wrinkle it lightly, and secure it with a Tucker. (If you have experience with Seat reupholstery) Seat can be reupholstered in Beauty with relative ease.
It is not an OEM fabric crimp type but a sewing type fabric, Seat reupholstered." It has so much QUALITY that you would not even notice it if you did not say so.
It also seems to be durable, so as long as it is not cut by excessive protrusions or blades, it will be as durable as OEM.
Because the fabric is newer, it is naturally more flexible and less slippery while riding. If you are not sure which one to choose when reupholstering your seat, NTB is a good candidate. Normal Fit to
How did it compare to other products?
SEROW was a popular vehicle and several companies had Seat Covers on the market, but NTB's low price was overwhelmingly competitive.
Universal Product. However, it would be difficult for other manufacturers to sell a 3D sewn product for SEROW250 at this price.
[Points to note]
Since the product is three-dimensionally sewn for the car model, it is an easy job compared to Universal Product's Seat Cover. In fact, it may be more troublesome to remove the old Seat Cover, and that is how easy it was to apply this product.
First, fix the front and rear of the Seat slightly loose, and then set the Quantity:Pair (for Left and Right) When pasting the "One Side", it should be pasted along the "Seat sponge" without wrinkles so that the "One Side" will not be pulled too much.
Other items that would be helpful
The deciding factor in the purchase
As I wrote above in a scattered manner, the shape is three-dimensionally sewn for SEROW250.
On top of that, the price is low.
[How is it used?
I use it in all kinds of situations, from riding around town to playing in the mountains to touring.
Seat grip is good and very comfortable.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. and Instruction Manual for simplified application is available in Quantity:Set
No Tandem belt (because the OEM SEROW does not have Belt) 。
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
It is a very good Seat fabric and I hope to use it again next time.
If possible, even if the price is a little higher, it would be more attractive if the seat surface is black and the SIDE is silver.
View detail
Fits: KAWASAKI KSR-1, KAWASAKI KSR-2
Securely sewn even for small motorcycles
[How is it used?
I got a used spare Seat for a KSR-II that I have owned for many years, but I was looking for a replacement fabric because the Seat Cover had cracks, probably due to poor storage conditions.
I was unable to find Seat fabric in the same color scheme as the last model, so I searched Webike and found it for sale at GRONDEMENT, so I purchased it.
How did you like it?
It is probably a higher quality fabric than OEM Product.
Color as a seat:Gray outer skin part is Dimple processed and gripped firmlyQuantity:Seat fabric is very easy to stretch, not a flimsy article of 1pc. fabric, but firmly Draping in front and back.
The price at the time of purchase was 6,820 yen, which was relatively expensive compared to NTB's Seat for SEROW250. Convincing Prices or perhaps I should say This is a low price for this quality." The product was so good that we could feel that it was a good product.
The fabric is thicker yet softer and may be more durable than the OEM Seat Cover.
How did it compare to other products?
To be honest, the only other product on the lineup other than GRONDEMENT's was a black fabric surface, and at this point, GRONDEMENT was the only choice for me.
[Points to note]
Since this product is three-dimensionally sewn for KSR, it is an easy job compared to Universal Product's Seat Cover. In fact, it may be more troublesome to remove the old Seat Cover, which is how easy it was to apply this product.
First, fix the front and rear of the Seat slightly loose, and then set the Quantity:Pair (for Left and Right) When pasting the "One Side", it should be pasted along the "Seat sponge" without wrinkles so that the "One Side" will not be pulled too much.
Other items that would be helpful
The deciding factor in the purchase
The shape is three-dimensionally sewn for KSR and the color scheme Pattern is the same as the final KSR-II model.
The price is never too high. High The price is exquisite, which cannot be said to be the case.
[How is it used?
The city driving is Main, but it has almost become Display these days as it is getting old and is stored in a Large cutout.
I would like to own it as long as possible.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. and Instruction Manual for simplified application is available in Quantity:Set
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
Please continue Lineup as long as GRONDEMENT continues.
View detail
Fits: HONDA XLX250, HONDA XR200, HONDA XR250, KAWASAKI KL250, KAWASAKI KLX150, SUZUKI DF200, SUZUKI SX200, SCORPA T-RIDE 250F, HONDA CRF150R, HONDA CRM250AR, HONDA CRM250R, HONDA FMX650, HONDA SL230, HONDA XR250 BAJA, HONDA XLR250, HONDA XL-DEGREE, HONDA XR230, KAWASAKI KL250, KAWASAKI D Tracker, HONDA XR250
I appreciate the affordable price.
[How is it used?
The KDX220 I purchased used was not in bad condition for an old vehicle from the 1990s, but the seat cover was in a slippery condition because the surface had begun to harden, probably because it was from that era.
On the way home after taking delivery of the car at Motorcycle shop, my buttocks moved back and forth every time I accelerated or decelerated, making it very difficult to enjoy the ride, and as soon as I started driving. The first custom was to reupholster the Seat Cover. It was like that.
Originally, I was going to bLOOVE it, including a look at the vehicle, but I went home right away and looked at Webike's product introduction section. KDX220 Seat I've been searching for...
Since it is an old vehicle, there are not many choices, but I-Net's Off-road Vehicle UniversalSeat Cover was a hit, and the price is low! If by some chance I fail, I'm ready to give up." So I bought it
How did you like it?
As a universal product, it is not as good as the Seat fabric made by a three-dimensional manufacturing process for each car model, but I personally think that the KDX Seat itself is not a complicated shape, so I was able to stretch it well.
The new fabric is highly flexible and the dimpled finish gives it a high grip, so you can enjoy riding without being carried back and forth every time you accelerate or decelerate.
To be honest, I wanted to stick with the OEMSeat Cover, but after looking at the price, the thickness of the fabric, and the condition of the finished product, I felt this product was sufficient.
How did it compare to other products?
There are few choices in terms of car models to begin with, and other products are expensive and have stopper belts sewn into the seat surface. I mean it!" I couldn't choose one because I had a strong feeling that it would be embarrassing to me, as I have poor driving skills.
What points should I pay attention to?
Patience and ingenuity are required because the products are not three-dimensionally sewn for car models.
If the tucker is driven in too shallow, there is a risk that the fabric will break from the tucker.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
The only Seat fabric that was safe for normal use was sold only by iNet.
We were not able to confirm that the products were made by KawasakiOEM, so we did not consider them in this case.
[How is it used?
Basically, it's Main for city driving. I can't even use SEROW, so it was too Hurdle for me to play in the mountains with a 2CycleEngine equipped car.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. with Instruction Manual and Vinyl for waterproof.:Set
Tandem belt is not included, so those who need it must purchase it separately or reuse the OEMBelt.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
Although it may not be a problem for popular cars, it is a product that older cars and minors cannot do without, so we hope you will continue to sell Lineup for a long time.
View detail
Fits: Others , Others , Others , Others , HONDA CROSS CUB, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA monkey, HONDA Super Cub 50, HONDA Super Cub 50, HONDA little cub, HONDA little cub, HONDA 12VMONKEY, HONDA CT125, HONDA SUPER CUBC125
With this 4, I can also think of bean paste as a sweaty person!
[How is it used?
I have bought and installed it before, and mine is an indispensable Cover!
Was the one you received as per Image?
Yes, it was exactly as shown on the Image.
It's easy to use, no heat, no shift.
How was your experience with it?
I installed it and ran it immediately.
I was afraid that the seat height would be raised since it is to be placed over the normal seat, but I had no problem.
[Points to note]
The size is a little bit limited, or rather Exactly, so I added it while pulling it out.
No movement after installation (no Gap), no problems, and I'm sober.
How did it compare to other products?
I bought only this product without comparing other products.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Grip is amazingly durable!
[How is it used?
This product was stuck on an XR250 Seat that was purchased used by a person at work about 15 years ago from the beginning.
The vehicle had been restored to the best of my ability at that time because the exterior of the vehicle was damaged except for the Seat, and after many years it came to me a few years ago.
The exterior of the car was damaged by ultraviolet rays, and the tires were badly cracked and the brakes were sticking to the car.
Sorry for the long preamble, but even in such a state of exterior rustling, only Seat remained flexible.
The surface had lost its Luster due to water stains and dust, but after washing the car and applying a protective material, it returned to the condition it was in 15 years ago.
It is indeed a product sold by Webike for 10,560 yen, and is definitely more durable than the OEM Seat Cover.
How was your experience with it?
When the car came into my possession, I again did Restore maintenance on each part of the car, but I drove it for a while without reupholstering the Seat (I eventually replaced the Seat Cover with another Manufacture's one to match the repainted exterior).
GripperMaterial that "Demonstrate Exceptional Flexibility and Grip Power" as the manufacturer's slogan says, is used throughout.
Assist Rider's Machine Control. The flexibility and gripping power did not deteriorate even when exposed to ultraviolet rays, rain, wind and dust.
How did it compare to other products?
As I mentioned above, I had replaced it with a Dimple-finished Seat Cover made by another company, but the Seat Cover remained as flexible as a new Seat surface after more than 15 years. I think it is phenomenally Tough.
[Points to note]
Not so much as a warning, but the moat on the Seat Cover named GripperMaterial was deep, and if the Seat was bathed in mud, the dirt would get into the deep moat and be difficult to remove.
The product is three-dimensionally sewn for XR250 (MD30), so it is relatively easy to work with if you have experience in Seat reupholstery in the past.
Other items that would be helpful
The deciding factor in the purchase
As I mentioned at the beginning, it was already stretched at the time of purchase on a used car.
[How is it used?
Basically, it is a city Main, and I am fully aware that it is a high-performance Motorcycle for a 4StDual PurPass car at that time, but I could not handle it because my feet could not reach the ground on rough terrain, and I lacked the skills.
【Included Parts:presence or absence】.
Quantity of 1 Seat Cover and Instruction Manual on how to apply.:Set
I don't think there was a tandem belt attached.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker, a slightly larger version of Stapler. and short-legged core.
The fabric joints are crimp type like OEM, so there is no slippage, I think Coking agent is not necessary.
Opinions and requests to Manufacturer.
An indispensable manufacturer in the off-road motorcycle world.
We look forward to your continued development of a wide variety of lineups.
View detail
Improved ride comfort without sacrificing style
The reason why I bought this seat is because I like the Normal seat for design, but it hurts my buttocks when touring.
The tandem seat is too narrow and the large seatback is not stable, and the tandem can only be used for short distances.
The seat is 4 cm higher, so the footing is worse, but the cushion is thicker and the ride is more comfortable,
Tandem performance was also improved, and I had no complaints even after running about 120 km on the tandem.
Since it is an OEMOption "Pon attachment" Therefore, we only need to replace it.
I was not sure about the price and the Normal seat since it is available, but I am happy with the replacement.
ESTRELLA itself is no longer in production, so those who are considering it will recommend replacement before it is discontinued.
View detail