Reviews
I saw that it was out of print, so I suppressed it.
Manufacturer OEMOption Parts.
I bought it because it is out of print and I thought I would hold on to it.
Yeah, failure.
White on Gun meta as per image (over Paint or Seal) [Color] (Clear?) It was.
The one up in the product image looked Black.
In any case, Out for Mat silver bodywork.
It would have been better if it were black instead of the shiny gun meta.
Two bright, flashy colors that are not on the body of the car.
Parts that would look good on a Black SV from Gun meta.
I tried Silver as a trial, but the Fit feeling is not so good.
Paint was returned and sealed to the Stock shelf as a testFit only item.
View detail
Axle Slider removal and installation
I had a nail puncture my rear tire and i needed to remove the rear wheel to have it fix. Initially i thought it was difficult to remove the slider but it is just a direct bolt on to the rear axle. There is no pins or special locks on the slider, its just a regular bolt on both ends of the axle slider. I assume its the same process with the front axle slider. overall its an easy fix. View detail
Fits: SUZUKI , TRIUMPH DAYTONA675, KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ninja, KAWASAKI ZX10R, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI Z250, KAWASAKI Z1000, HONDA , KAWASAKI Ninja 1000SX, DUCATI Late 999, BMW S1000RR, DUCATI 749, BMW S1000R
Replaced from Chinese
I bought it after seeing other people using it at Motegi. Unlike the Chinese Hook, the J-TRIP Hook has a step to prevent the swing arm from hitting the swing arm. What I didn't understand was that the Hook has a double structure with a collar inside, but since the Hook doesn't rotate, I am wondering what the collar is for. I also think the price is a bit high. Well, I am satisfied with it. View detail
Fallen cannibals
I don't want to experience the effects, but I put it on as a precaution against falling.
Installation can be done by anyone.
The previous owner had KFACTORY on the Front, so I looked for it, but I couldn't find one for r1000r, so I went with Speedra for the Rear.
Since the Front Fender was changed to Speed La, the ratio of Speed La is likely to increase in the future.
View detail
Could not be installed.
It is unclear if the shape of the Side Stand differs from lot to lot,
The thin end of the Side Stand was not able to be attached to the Upper Plate.
It looked like it could be installed if the UpperPlate was shaved a few moremm, but I returned it this time.
View detail
Fits: KAWASAKI ZZR1100 C, KAWASAKI ZZR1100 D, KAWASAKI ZEPHYR750 [Zephyr]., KAWASAKI ZX-10, KAWASAKI ZEPHYR400 [Zephyr]., KAWASAKI GPZ900R NINJA [Ninja]., KAWASAKI ZEPHYR1100 [Zephyr]., KAWASAKI GPZ750R NINJA [Ninja]., KAWASAKI GPZ1000RX NINJA [Ninja].
Works for me!
Good product, does exactly what it is supposed to do. I have had times where I put a bike up on my paddock stand with these adapters and left it there for weeks, and never felt any reason to worry. There looks to be a way to semi-permanently install them so you can leave them in while you ride, but I haven't done that. These are just an in-shop install-when-needed tool for me, and for that they work great. View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
I know it's not the same application, but this one helped me!
The other day, when I was in a fender bender with a car and fell, this Hook bolt was deformed but the Swing Arm was unharmed.
I guess the original purpose of this product is to be used as a Hook when raising the product in STAND, but it was helpful to play the role of a Slider.
However, as may have been mentioned in the product description, the clearance may not be sufficient and the STAND may interfere with the Swing Arm if it is used as a Stand Hook as it should be.
I don't want to bother you again, but I am still wearing the same one after the accident.
View detail
Fits: APRILIA RSV1000 Series, DUCATI Panigale 899., APRILIA RS125, APRILIA RS250, DUCATI MONSTER S2821, TRIUMPH DAYTONA675, YAMAHA , APRILIA SL750
Easy to use
I use it for STAND and it is safe to use without gapping. View detail
GB Engine Guard
[How is it used?
24-hour (e.g. observation, operation (of a machine), care (of patient))
Was the one you received as per Image?
high
Was the installation difficult?
Easy
How was your experience with it?
No problem
[Included Parts:were they on?
OK
[Was there anything that disappointed you?
Oil replacement has become a bit more difficult.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Great rigidity.
The pipe is thicker and has more fixed bolts than the OEM, so it is very rigid.:It comes with a Plastic Slider, so it will be cheaper in case of moss.
However, installation was a challenge. Since it is slightly gapped, I managed to install it by fine-tuning while loosening and temporarily fastening.
I thought it would take an hour to finish and started working on it at 15:00 and finished at 19:00. I think it was an individual difference.
The product is good and I am satisfied with the Large change.
View detail
Looks Good
Looks good to me.
It was very difficult to install.
I followed the instruction manual, but the bolt holes do not fit.
I managed to install it by force.
What's wrong with the body of the car lol.
Bad parts?
View detail
**EXCELLENT SERVICE**
About quality and texture of the Honda NC750X Centre Stand was excellent. Difficulty of installation..Not difficult at all. Install went well, easier with two people. Only took about 15 minutes. Cost performance and comparison with other products. Honda product fitted perfectly. About shipping and packaging. The centre stand was packed well and shipping was quick. It took only five days to arrive.Very happy with the new centre stand. The stand makes it a lot easier with maintenance on the bike.. Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
OK for minor falls
Large sturdy to the extent that it is knocked down when standing or parking.
RearBrake pedalBrake lever and clutch lever will bend if it is knocked over even with this attached.
It does not seem to be able to withstand a fall while driving.
View detail
Hmmm...
It has not been used on rough terrain, so it has not shown its full potential.
Screws must be screw locked (loosened after approx. 200 km of driving)
It attaches without rattling, but I am concerned.
I am extra worried because STAND is a few millimeters longer (thicker).
I think the quality and texture are good.
While driving on the highway 'If you fall! I ran with the thought.
I removed it when I got home. Too bad.
I will carry it in my SeatBack.
I believe that the day will come... when I will use it.
View detail
The BEST item for xsr!!!
This item is truly amazing, it works and aesthetically it looks brutal with top-notch finishes, totally recommended. -------------------------------------------------- -------- This item is truly amazing, it works and aesthetically it looks brutal with top-notch finishes, totally recommended. Powered by Google Translator View detail
Bolt
Bolt supplied with Swing Arm does not fit View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
A lowered bike needs this stand.
This stand is better than the aftermarket stand I purchased after lowering my bike. This stand was compatible with the switch that turns off the engine when I deploy the stand. The lean angle gives me comfort that the bike will not fall over in either direction. View detail
It protects the vehicle body.
[How is it used?
We removed and replaced the Y's Gear Engine Guard (steel) that was installed 18 years ago when we purchased the car new.
It is made of steel, so it was rusting, although I never damaged it by falling.
Was the one you received as per Image?
It is a solid product that appears to be rigid.
Was the installation difficult?
I asked Right-arm in Nishi-Tokyo City, and I feel safer asking PRO to do it.
How was your experience with it?
I will know how it feels when I fall down, but I haven't fallen down yet.
I did some research and found out that unlike the steel Engine Guard, the Pad slides and protects the body of the vehicle by shaving it. I also like the fact that it is not flashy.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It would be better to have it installed by a Motorcycle shop with proper Torque management.
View detail
The question is where the preference lies.
Rigidity of the car body as a matter of course (Sensation) The only problem is that you will not have the comfortable twisting feeling of the car body. However, the twisting feeling of the car body that was comfortable will be lost, so I think the point of purchase will be how to take care of that. The Gold price is too high for a trial purchase, so you need to think carefully about what you want to do with a softer chassis. Also, XSR700's suspension is worth the price, so I felt that it would be better to take care of that first. (Although the suspension change will cost much more than this part) View detail
Fallen cannibals
[How is it used?
Purchased considering it as a walking stick before you fall down.
Was the one you received as per Image?
The head part seems to be a bit large, but I guess it is not so when I install it.
Was the installation difficult?
Although a pattern was included when drilling mounting holes in the Sub cowl, it was difficult to align the holes, so it might be better to ask a contractor to drill the holes only.
[Included Parts:were they on?
The metronome was included with the installation instruction manual, pattern paper, etc. I copied the pattern paper in advance and used it.
[Was there anything that disappointed you?
The accuracy of the pattern may not be good enough.
View detail