Reviews
Fits: HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily
ส่งเร็วทันใจสินค้าสมบูรณ์แบบไว้ใจ webike อุดหนุนตลอดครับ View detail
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
Good performance product
This is a very good product, after install you can feel better when you driving. good material with good packing nice looking. Thank you webike good customer service View detail
Handsome modification
About quality and texture: Good About the feeling of use: Exellecent About Design: Functionally Aesthetic About Size Chart: Accurate Cost performance and comparison with other products: affordable About shipping and packaging: well and safe. Any concerns, cautions, or advice when purchasing: make sure to know what screw size your mirrors are, these adapters are in M10 View detail
Also effective in reducing microvibration
The Normal handle bar has an integrated Bar End, but we replaced it with a Sansei RACING Handlebar, so we searched and selected a Bar End that would fit it.
Since it is made of steel, it has a certain amount of weight, and this weight has reduced the fine vibrations transmitted to the Handlebar.
Brake lever side guard is Material:Plastic, flexible, and with rounded corners, you won't have to worry about using it on the street.
Plus, if it should break, replacement parts are available at relatively low cost.
View detail
This is good.
The shape of the mirror is designed to avoid the arm holding the handlebar, so the visibility is surprisingly good, and the bracket is thin, so it may be good to be less assertive.
The Mounting Base is a little large, so I adjusted it with a washer so that there would be no wound left on the cowl when tightening it.
View detail
heavy
Heavy.
I felt Fashion had a lot of personality,
It is too heavy, partly thanks to unnecessary design.
The construction is sturdy and easy to see without blurring.
The Handlebar area is too heavy to be operable.
We ended up reverting to OEM.
View detail
I'm sorry.
There is nothing wrong with the functionality, except for the Bolt section Material:Plastic and molded BALI are also available and do not appear to be of very good quality.
There are similar MirrorRepair Parts by TANAX, which are made of Gold genus and have a much better finish. (but it is heavy + has a weird logo mark of Tanax)
View detail
It was not enough.
There is nothing wrong with the functionality, except for the Bolt section Material:Plastic and molded BALI are also available and do not appear to be of very good quality.
There are similar MirrorRepair Parts by TANAX, which are made of Gold genus and have a much better finish. (but it is heavy + has a weird logo mark of Tanax)
View detail
Easier riding posture
Medium. The texture is good, and the riding position is easy,
Wouldn't it be better to have no Seal affixed to the product?
View detail
Handlebar Brace
The length is adjustable, so it can be used even if the position is changed or the Motorcycle is changed. View detail
Fits: KAWASAKI NinjaH2SX, KAWASAKI NinjaH2SX SE, KAWASAKI NinjaH2SX SE+
Not only the phone Mount.
I purchased these parts to reduce the vibration coming from the Handlebar as well as the phone mount. I used to feel numbness in my hand due to the vibration, especially when turning at high RPMs, but this seems to have been slightly reduced after installing these Parts.
Of course, it can also be used as a smartphone mount.
If only the screws securing the handlebar to the bridge can be removed, the rest is bolt-on, so it is not a very large work, but anyway, removing the original screws is large and strange,
View detail
Large satisfaction, I should have changed it earlier.
I have tried various levers from brembo OEM, but this one fits me the best, including one for Clutch SideRCS.
When I inquired about the compatibility with my favorite XR0.11.71, I was told that it was not made by brembo, so I could not get an answer. I checked the description of ASite and found that RMCMASTER is available! I immediately bought it because the delivery date was earlier than this one.
View detail
Easy to use
There were not many options available for the GSX-S1000GT, but I am satisfied with the product. It is easy to adjust.
The shape of the Lever is common, but I personally would have liked the cross section to be more rounded for easier gripping.
View detail
It's not bad.
The lever position adjustment is a mechanism where the screw comes out and hits the base, so it is not possible to adjust without a tool. I would like to have a dial type adjustment like the brake lever.
The shape of the Lever is common, but I personally would have liked the cross section to be more rounded for easier gripping.
View detail
Fits: SUZUKI GSX-S1000, YAMAHA YZF-R6, YAMAHA YZF-R1S, YAMAHA YZF-R1, KAWASAKI Ninja ZX-6R, BMW S1000RR, BMW S1000R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000F, YAMAHA YZF-R1M, SUZUKI GSX-R1000R, KAWASAKI Ninja ZX-25R, KAWASAKI Z650RS, SUZUKI GSX-S1000GT, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4R RR, SUZUKI GSX-R1000, SUZUKI KATANA
appearance
It is almost all about looks. Installation is easy, but be sure to follow the tightening Torque. View detail
Fits: HONDA Dio (2 Cycles), HONDA Livudio SR, HONDA Dio (2 Cycles), HONDA Dio (2 Cycles), HONDA Superdio, HONDA Superdio, HONDA Livudio SR, HONDA Livdio ZX, HONDA Livdio ZX, HONDA Livdio ZX, HONDA livudio, HONDA Livdio ZX, HONDA livudio, HONDA DIO [Dio]., HONDA DIO [Dio].
Bearing was subtle.
I have concerns about Bearing.
It is made differently from OEM and the Ball easily comes off RoseRose and falls off.
It is easy to restore a dropped Ball, but I felt it would cause problems after assembly, so Bearing reused the original OEM.
Other than Bearing, I don't think it is much different from OEM.
View detail
LightOnOff switch purchased and installed at Shop
It is also convenient to install a switch with a light ON/OFF function. View detail
ZETA X3 Protector
I installed the AdventureArmor Handguard and purchased the Protector from the same ZETA.
Although I was not sure if I wanted to go with the XC, which is a bit larger, I was happy with the X3 because it was a small motorcycle to which I would install it.
The Size is good for those who are OK as long as they do not get hit on the fingers by flying rocks or hard insects while driving, because it is Small for wind protection.
The Master cylinder guard, removable with Screw, was also a simple but interesting GuiMick.
Four bolts are also included, making it easy to install on vehicles that already have a hand guard installed.
The color White can be Blue-ish or Green-ish. I saw a Review that said
The color of the one I received was what can only be described as White when viewed indoors or in the sun.
Perhaps there is a slight difference depending on the production lot.
View detail
Fits: SUZUKI TL1000R, SUZUKI SV1000S, SUZUKI SV1000, SUZUKI GSX1400, SUZUKI GSX1400Z, SUZUKI GSX1400, SUZUKI GSX1300R Hayabusa, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM1000, SUZUKI BANDIT1250F, SUZUKI BANDIT1250
rumor that appears to be quite true (rumour)
Replacement from FoldingLever in U Canaya.
The Kanaya Lever itself is a good one, but I replaced it because it had a fall damage since I bought the body and I did not like the Straight shape very much.
In comparison to Kanaya Lever,
The gentle bend at the base of the lever allows for more freedom in where you place your fingers.
As sung in the advertisement, the lever is gently curved so that it is soft to the touch when you hold it.
Both Levers are about the same thickness.
It was like that.
As the previous reputation suggests, I think the feature of the Largeest is the gentleness of touch when you hold it.
It is truly a lever for city driving and touring.
Those who want a Solid Touch or Sporty feel will not meet with many people, so the Straight shape is better.
View detail
Fits: APRILIA RSV4, HONDA CBR600RR, KAWASAKI ZX-25R, SUZUKI GSX-R125, SUZUKI GSX-R150, HONDA CBR1000RR-R, KAWASAKI ZX-10R, KAWASAKI ZX-4R, SUZUKI GSX-R150, YAMAHA YZF-R25, HONDA CBR1000RR, HONDA VFR400R, SUZUKI GSX-R125
Just the right height
Close to Type A at first Adjustable Clip On Handlebar (Duca Motorcycle, BSRA50) I had been using a handlebar with a "M" but the position of the handlebar was not quite right and I wanted to raise it another 20mm or so, and then I found this product.
I installed it and it is perfectly positioned and very easy to use.
View detail