Reviews
![PREMIUM ZONE Master cylinder tank cap [NISSINΦ59]](https://img.webike-cdn.net/catalogue/images/19870/92728_T01_TS.jpg)
Fits: Others NISSINMaster cylinder tank cap O.D. 59 (some φ61)
For Dress-up
Used for Nisshin's 5/8 Radial master Tank.
It is just a replacement for the OEM plastic Cap, but it looks spectacular.
View detail
Performance remains the same, but
It's really a self-satisfied product.
Changing to this will not change Motorcycle's performance, but it will
RedMONKEY, so we are changing anything that can be changed to Red color.
The product itself shows that it is carefully made.
If you are interested in Tres Up, you must buy it!
View detail
Body color and Match
The CylinderTank cap and the body color match each other very well. View detail
![PREMIUM ZONE Master Cylinder Reserver Cap [NISSINΦ38]](https://img.webike-cdn.net/catalogue/images/19870/92727_T01_TS.jpg)
Fits: KAWASAKI ZZR1400, YAMAHA YZF-R1, KAWASAKI ZX-14R, KAWASAKI ZX-6R, YAMAHA YZF-R1M, Others
Quality is high.
The quality is high, but so is the price. I bought it at Webig for the Point Reduction Sale and used it for the master cylinder of the rear brake of my DAX125. I think the cost is reasonable because of the cut-outs. View detail
bremboFluid cap
Replaced because it had deteriorated and looked bad.
Screw stuck and struggled to remove.
After the replacement, it looks different.
I feel good about the ride.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA
Moriwaki master cylinder cap
I ordered these caps as an upgrade and to add a bit of style, my caps were as ever packaged and boxed to the highest standard,with only four screws holding these on both were fitted within minutes an easy upgrade for your cb13 View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CB1000R, YAMAHA YZF-R1, YAMAHA MT-10, YAMAHA YZF-R6, YAMAHA MT-09, YAMAHA MT-09 TRACER, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA MT-07, YAMAHA XSR700, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-03, SUZUKI GSX-R1000, SUZUKI V-STROM250, SUZUKI GSX-R600, SUZUKI GSX-R750
Master cylinder cap
Changed from Green Light to Gold. View detail
It is conspicuous except for the fact that it is not.
The quality of the product is very high, and the feeling that it has been replaced is very high. Although only the lid is replaced, the anodized color and the product itself is elaborately made, so it is always in view, and it stands out and gives a sense of custom. The price may seem high because it is a lid, but it is effective. View detail
Fits: HONDA ADV150, HONDA ADV160, HONDA CB125R, HONDA CBR150R, HONDA CBR250RR, HONDA CRF250M, HONDA CRF250L, HONDA CRF250Ls, HONDA CRF250 RALLY, HONDA CRF250 RALLYs, HONDA Cross Cub 110, HONDA Dax125, HONDA FORZA, HONDA PCX, HONDA PCX, HONDA PCX eHEV, HONDA PCX HYBRID, HONDA PCX150, HONDA PCX160, HONDA Super Cub C125
Focus on appearance
If you notice, it's full of zeta.
YOSHIMURA is used.
The product is satisfactory but expensive!
Recommended for those who don't mind the price.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA
I am satisfied
Low unit price and ScrewQuantity with Driver:2pc
It is good to be able to exchange easily.
Inexpensive foreign-made products may be poorly processed.
I have a lot of defective products and I don't want them to leak.
We chose MORIWAKI products, even if they are a little more expensive.
The look would have been better if it were made of Plating.
View detail
![AluminumBillet master cylinder cap[DCR]Type-3](https://img.webike-cdn.net/catalogue/images/105539/09080249_5f5672ab55afa_TS.jpg)
Fits: HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA glom, HONDA FORZA250, HONDA CB125R, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA FTR223, HONDA CB223S, HONDA CBR250R, HONDA CB250F, HONDA CBR250RR, HONDA VTR, HONDA VTR-F, HONDA CBR400R, HONDA CB400F, HONDA 400X, HONDA FAZE
Don't leak.
Fluid will smear.
Mr. Manufacturer says there is no problem.
Diaphragm Plate should be present.
When I replaced it with DAYTONA, it didn't leak.
Is it Large sturdy if I get a new Diagram Flum?
But I'm not sure since I can't leak at the moment.
View detail
Fits: SUZUKI 250SB, SUZUKI DJEBEL250XC, KAWASAKI KLX140L, KAWASAKI KLX450R, KAWASAKI KLX300R, KAWASAKI KLX250, KAWASAKI D-TRACKER125, KAWASAKI D-TRACKER, KAWASAKI D-TRACKER X, KAWASAKI VERSYS-X250, KAWASAKI VERSYS-X250 TOURER, KAWASAKI VERSYS-X300, KAWASAKI KFX450R, KAWASAKI KFX700, SUZUKI RMX250S, SUZUKI DR250R, HONDA CRF250L, HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250L(S)
Red is Fashion!
Can be installed with a single screwdriver.
Recommended for dress-up appearance.
Packing was reused.
View detail
Fits: YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ125, YAMAHA XT250X, YAMAHA XT250, YAMAHA WR450F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250F, YAMAHA TRICKER, YAMAHA SEROW250, HONDA CRF300RALLY, HONDA CRF300L, HONDA CRF250RALLY(S), HONDA CRF250RALLY, HONDA CRF250L, HONDA CRF250L(S)
Fashion!
Dress-up!
Installation is easy with a 7mm Spanner or MONKEY.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, TRIUMPH STREET TRIPLE 765 S, TRIUMPH STREET TRIPLE 765 R, TRIUMPH STREET TRIPLE 765 RS, TRIUMPH STREET TRIPLE S 660, YAMAHA MT-07, APRILIA DORSODURO 750, APRILIA DORSODURO 900, APRILIA SHIVER 750, HONDA CBR1000RR, KAWASAKI NINJA 1000, KAWASAKI VERSYS 1000, KAWASAKI Z800, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ZX-10R SE, KAWASAKI ZX-10RR
Beautiful product
Lightech product is very beautiful with high quality product. Perfectly fit to my motorcycle. Good material, will repeat order again. View detail
Fits: YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3
It is good for dress-up.
Good for Dressing,
Note that the screws on the YZF-R25 are easy to lick,
Use the + for #1.
View detail
Fits: HONDA CB250R, HONDA MONKEY125, HONDA CBR250RR, HONDA CB300R
It's more upscale, but it's self-serving.
All the vehicles I've ever owned have been in these Type Caps.
I came to replace it.
I have just purchased a MONKEY125 and I purchased this item.
I chose MORIWAKI because the Exhaust System is also MORIWAKI, and I aimed for a sense of unity.
It's really rated 4.8, but −0.2 is that Screw uses OEM.
If you buy a cap in Black color, you won't mind, but the one I chose is not in Black color, so the Bolt is floating.
I am trying to find a Bolt in Stainless or Titanium.
It is my favorite place to ride and I always see it.
Also, I think the purchase price is an easy price to choose.
View detail
self-satisfaction
Looks Parenthesis better now.
Self-sufficiency.
View detail
Fits: HONDA CBR 1000 RR, KAWASAKI Ninja 400, KAWASAKI Z 1000 SX Tourer, KAWASAKI Z 1000 SX, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI Z900RS, TRIUMPH Speed Triple 1050 ABS, TRIUMPH Speed Triple 1050 R, TRIUMPH Speed Triple 1050 RS, TRIUMPH Speed Triple 1050 S, TRIUMPH Speed Triple 1050 S, TRIUMPH Speed Triple 1200 RS, YAMAHA FJ-09, YAMAHA FZ-07, YAMAHA FZ-09, YAMAHA FZ-09
Genuine Gilles Tooling Brake Fluid Reservoir Cap
I wanted to smarten up the bike with a few Gilles Tooling accessories and this was one I wanted. It is the rear brake fluid reservoir cap. Finding the right one was not hard but I did need to go through Gilles website and search that way. The price Webike had at the time of ordering was really good as they did have a sale on. With a couple more accessories I got all my order shipped together, this saves shipping costs on smaller items. I use EMS these days as they just get my orders delivered as soon as possible. The order was delivered in 5 days from shipping so you can't get much better than that. The order was well packaged and although the Gilles cap was in it's own well protected box, Webike took the time to make sure that there could be no damage to anything. A lot of bubble wrap was used which was great. The cap itself is a very very well machined part. The threaded section is super smooth, there is also a set of coloured rings you can use to put in the cap which might match your bike colour scheme. Very nice touch. A word of warning though, once you home the coloured ring you will not get that out without making a mess so choose wisely. Not a problem if you intend to keep the colour ring in place of course. I chose the red one btw. Anyway, there was not a problem fitting the cap as it literally just screws onto where the OEM one goes, that's it. Very pleased with the purchase so thank you Webike, very happy customer. View detail
Fits: HONDA CR125, HONDA CR250R, HONDA CR80R, HONDA CR85R, HONDA CRF1100L AFRICA TWIN, HONDA CRF1100L AFRICA TWIN, HONDA CRF1100L AFRICA TWIN ADV SPORTS ES, HONDA CRF1100L AFRICA TWIN ADV SPORTS ES, HONDA CRF125F, HONDA CRF150F, HONDA CRF150R, HONDA CRF230F, HONDA CRF250F, HONDA CRF250L, HONDA CRF250M, HONDA CRF250R, HONDA CRF250RX, HONDA CRF250X, HONDA CRF450L, HONDA CRF450R
Custom Black color
[How is it used?
The current NORMAL is Black, so I bought it to make it Colorful!
Was the one you received as per Image?
Yes, the product was exactly as shown in the Image.
Was the installation difficult?
It was easy to remove the Normal cover, remove the Filter inside, and install it on the purchased product.
How was your experience with it?
The Handlebar area is now brighter.
[Included Parts:were they on?
It was originally a Single Item, so there was no need for it to be a Single Item.
[Was there anything that disappointed you?
There is none
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I had to be careful not to get brake fluid on the body of the car when removing the inner filter and installing it on this purchase.
Instruction Manual is also included in the package, so you should be able to install it with a good look.
I don't have any requests.
View detail
Attached to Koken's Clutch holder!
This is attached to a Mechanical Clutch Holder from KOKEN. I tried it because I read in the product description of Koken that this can be attached to a mechanical clutch holder! I tried it because it was written in the product description of Koken.
By allowing for a design that is closer to that of the already installed RCSBrake master, the Quantity:Pair (for Left and Right) I am happy to take Balance in the
It is quite plain, but highly self-satisfying.
View detail