Reviews
For scratch prevention and protection
I thought it would be better to have heat resistance to prevent scratches on the Exhaust System.
It seems to be good for protection, but heat resistance? It seems to be good for protection, but what about heat resistance?
View detail
Expect heat resistance
I wanted something heat resistant to prevent scratches on the Exhaust System and Cowl, and this one looked good, so I bought it to try it out.
Since it is described as a high heat-resistant Type with a heat resistance temperature of 310°C, we are hopeful that the adhesive will not peel off due to heat.
Since the price is for a product without much width and length, I would like to see how it fares with the expectation that it will have some durability.
View detail
Effective when riding in a way that keeps the rpm high.
Recommended for those who run 70-80km/h Bypass roads at or above the maximum horsepower generating RPM and are using oil cooleretc. to prevent heat buildup. 。 We are installing it on a CUB. 。 The difference is about 1/3 of the change from Oil that has run 1000 km to new Oil. View detail
Because of cheapness?
Mokumoku when running on a pouring day.
A little fun with steam.
The color fading is great, perhaps due to the cheapness of the product.
Large might be sturdy if wrapped in a double layer, but
Space-wise, it's tough.
It would be stupid to rewind it just for the color.
As far as looks go, it will be White in a few months.
Consumables.
Color:Gray, Black, at least not this white.
I'm wondering if anyone knows of a product that says it won't fade.
I'd like to know so much ….
View detail
Exhaust SystemBlack since I purchased it.
I installed a black exhaust system, but the exhaust pipe looked like it was floating, so I bought this. When installing it, you need rubber gloves because it is prickly. View detail
Performance is secondary …
Vantage is installed for appearance first. It just looks cool. If there is a demerit to the wrap, I will consider it, but if it looks good and claims to improve the exhaust efficiency, I will install it. I use Stainless tie wraps for mounting. I prefer the look of it so …
I start to notice fraying after about 3 years of use. I bought it for that routine. The color is good and it is made by DAYTONA, so I will choose this one next time.
View detail
T&F Wrap around Drag pipe
It has 5m compared to other peaches (4.5M is the most common) I can wind it up pretty good!
The fiber is of high quality and I handled it without gloves!
It looks GOOD!
View detail
(There is a slight effect at 6k to 10k rpm.
I bought it a while ago and installed it because of the cooler temperatures.
There is a slight effect at 6k to 10k rpm, but few people may be able to experience it. 。
If the RPMs drop on an uphill climb, the drop will be slightly less.
It is similar to the performance difference of replacing the Plug with a NORMAL??Windshield IRIDIUM, so there is probably only about a 1% difference? The difference is only about 1%.
The specific Merit is when you are on a Corner with a bumpy uphill gradient etc. and you are wondering whether to pull in 3rd gear or 4th gear.
A Stainless Steel Band is included, but when maintenance is a top priority, the Gold Stainless Steel needles are more convenient in some areas.
This is especially recommended for SmallEngine Displacement Volume.
View detail
Wrapping around exhaust pipe
There was a concern about heat when converting to Atech-SPL, so it was installed in the OEM exhaust pipe.
Result 3. Quantity:I used it for 5pcs. It was easy to roll with good color and little fluff.
It is fully baked but still has a sweet aroma.
View detail
For Heat Protection and Fashion
I don't want to touch the exhaust pipe that just ran and get sizzling.
I thought of various reasons why it would be dangerous for children to touch it.
I love the Parenthesis with the cloth wrapped around the Motorcycle!" was wound up with the real story!
While it gives a sense of custom at once, it also gives a sense of raggedness.
I think it looks unbearably tacky to some people.
I think it's cool! I think it's cool, so I'll pass.
When rolled up, the insulation performance is good, and it appears to provide a slight sound insulation.
I'm personally pleased with Large!
Yes, I also diverted this one to repacking sound deadening material inside the Exhaust System.
Ordinary Glass Wool would fly away, so I thought this would be a good choice.
The result was a Large success.
View detail
Fits: HARLEY-DAVIDSON
countermeasures against heat
Exhaust pipe cooks the Right leg to about Medium rare, so I bought it for good measure.
To be honest, 2.5 LE/G is only a little better at this level.
I added a heat shield to the back of the Heat Guard, put a Ceramic washer between the fixed bolt, and put a leg cover on the human side. But it is still very hot.
My favorite to look at.
The process is not difficult, but it is tedious. If you are patient and carefully soak it in water, you can roll it up beautifully.
View detail
It has a higher percentage of glass fibers than Titanium, and the manufacturer knows it, but they sell it as TitaniumVantage. Vinyl gloves are included with the product. View detail
tingle free
It can be rolled without wetting.
It does not tingle at all.
However, it might be better to wash the Motorcycle after rolling it up because it gets fluffed up.
Included are Rubber Gloves and AluminumTie Wrap.
The included AluminumTie Wrap is not tight enough, so you should purchase the Home centerAluminumHose Band in advance.
View detail
Used for heat removal measures for STREET TRIPLE.
I used this product as a countermeasure against exhaust heat for my STREET TRIPLE and it was easy to work with, just wrap it around the exhaust pipe! View detail
Fits: HARLEY-DAVIDSON Universal
Easy to use
Looks It will be dressed up.
It is also highly insulated, which improves exhaust efficiency in addition to its appearance.
It takes some ingenuity to wrap it neatly, but it has a custom feel and is satisfying.
View detail
Stainless burning cover
[How is it used?
The Stainless Steel exhaust pipe is burnt and speckled. At first I thought of cleaning it up with burn removal chemical, but it will eventually burn again and return to the same condition after use, so I decided to wrap it with exhaust wrap to hide it. The ...
Was the one you received as per Image?
It is a bit like a thick bandage. 25mm narrow was the right choice because of the tight curvature of the exhaust pipe. 50mm wide would have been difficult to wrap neatly around the tight curvature.
Was the installation difficult?
I put on rubber gloves, soaked the exhaust wrap lightly in the water in the bucket, and wound it without cutting it in advance because I did not know how much length I would use for one pc of the exhaust pipe. At the beginning of winding, I folded the end of the exhaust wrap inward a little to prevent it from unraveling. After about one and a half rolls, I fixed it tightly with Stainless Steel Tie Wrap, and after that, I wound it so that it overlapped by about 10mm while pulling the exhaust wrap lightly. The following is an example of the use of the "M" in the "M". When the wrap has been wound up to the middle, it is good to hold the wrap and turn it as if squeezing it to loosen it. When it is wound to the end, squeeze the exhaust wrap again to remove the looseness. At the last end, fold the end of the exhaust wrap inward slightly to prevent it from unraveling, as you did at the beginning of wrapping, and Tie WrapQuantity:The 2pcs were used to secure it in place.
How was your experience with it?
After starting the engine, white smoke comes out from the exhaust wrap for about 10 minutes, so you need to be careful. Even with the exhaust wrap wrapped around the exhaust pipe, it was very hot even if I touched the exhaust pipe with my bare hand for a moment, and there was a lot of heat transmitted to the heat guard. Surprisingly, the exhaust sound became a little more mild. It sounded a little muddy.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Point or hang of installation:If you just wrap the exhaust wrap while pulling it lightly, it is not loose enough, so be sure to grip the exhaust wrap in the middle and turn it to squeeze it. This procedure will take out the looseness.
Caution:Wear gloves when handling exhaust wrap with bare hands, as it is prickly and painful, and be aware that the ends of the exhaust wrap can easily come undone.
Items to buy together:Stainless Steel Tie Wrap
View detail
A bit sorry
The photo of the product is only for an image. Please use it as a reference. Too bad.
Well, it's usable as a thing, so don't worry, it's me!
View detail
To hide burn marks
I was covering my SR400 with a blanket before putting on the cover, but the other day I accidentally made a scorch mark on the exhaust pipe area…
I bought and installed this Vantage to hide the scorch marks.
The Instruction Manual says that you don't need to put it in water to use it, and I think it's true, the Material was soft and didn't feel sticky.
This is the first time I've seen this kind of product in action. I'm very satisfied.
Included in the package are
ThermoVantage and Instruction Manual
Material:Stainless SteelBand*6pcs
1 pair of thin rubber gloves
View detail
Good quality.
The texture is solid and the look is excellent.
I'm not sure how effective it is.
It's OK because it looks good.
Also, I bought the thicker Vantage because I thought it would be better for parenthesis.
The bent part of the Exhaust pipe was quite difficult to wind.
Next time I will try a narrower one.
Rubber Glove Mask is required.
After the work, I took off the mask and cleaned up, but it seems to have inhaled the glass fiber a little.
I had a sore throat for about two days.
Also, it comes with bands, but I'd like to use 2 bands each for the thicker Vantage, so if it came with 4 bands, I'd be happy.
Even better.
View detail
For heat protection of oil cooler
I purchased this product to install an oil cooler, hoping it would prevent heat damage.
I wrapped it around the exhaust pipe of MORIWAKIMX, but we have two FSprocket up and the start was a little weak. It became a little smoother.
I will install the Meter at a later date to see how effective it is against oil temperature.
View detail