Reviews
Fits: HONDA CB750 Four(CB750K)
cb750FourExhaust SystemConnecting Pipe
Tightening Band and Quantity:The Set is sold by other Shops, but the price is quite high and it is hard to find it because only the tubing is enough, but it is sold by your company and it was a big help! View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000
Cancellation
Slip-on SilencerRight I bought this for a single side and to make ChainMaintenance easier.
Gasket is required for installation 。
I also feel that the throttle response has improved, perhaps due to the one-piece design.
View detail
Fits: DUCATI MULTISTRADA 950 S, DUCATI MULTISTRADA 1260 ENDURO, DUCATI MONSTER 1200 R, DUCATI MONSTER 1200, DUCATI MONSTER 1200 S, DUCATI MULTISTRADA V4 S, DUCATI STREETFIGHTER 1098, DUCATI MULTISTRADA V4, DUCATI MULTISTRADA 950, DUCATI MULTISTRADA 1200 ENDURO, DUCATI MONSTER 937, DUCATI MONSTER 937 PLUS, DUCATI MONSTER 1100 EVO, DUCATI MONSTER 696, DUCATI MONSTER 1100, DUCATI MONSTER 796, DUCATI MULTISTRADA V2 S, DUCATI MULTISTRADA V2, DUCATI MULTISTRADA V4 PIKES PEAK, DUCATI DESERTX
Custom in Red color Bartz
Black color body is being custom made with Red colored parts.
The small screw part of the Exhaust System installation area.
I thought it would be a little less noticeable, but it turned out to be a good color addition.
I am satisfied with the inexpensive and easy installation.
Naturally, there is no change in driving.
View detail
Fits: KAWASAKI ZX-14R
LightExhaust SystemCancellation
Considering my driving style, I wanted to use a LeftSingle Silencer and searched for a similar product, but could not find one, so I bought this product thinking that I could install it with some modification. As a result, I was able to install it easily without any modification. I wonder why they put "LightCancellation" in the product name. Before purchasing this product, I was thinking of welding it from scratch, but the price is high, but I am satisfied with the ease of installation. The only thing I am considering is changing the color. The sound seems to be a little smaller, though I can't really feel the difference since the motorcycle has too much power to begin with. View detail
Rubber Joint
I am repurchasing to fix Chamber.
It seems to be quite hard and seems to absorb vibration.
It is not bad looking.
View detail
Fits: YAMAHA SR400 19, YAMAHA SR400 19, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500
More than you can imagine.
The increase in RPM was immediately felt!
After changing from the OEM exhaust pipe to the external Full Exhaust System, the RPMs were not increasing well, but by installing the TorqueValve, the RPMs improved to a large range and the Stress was eliminated!
View detail
As a can seraer, it works correctly, but, it is not necessary for a normal muffler.
My GSR750 is equipped with a Slip-on Silencer which seems to be a bit noisy as it seems to be able to pull out.
It is said that the Exhaust Device is installed to gain low RPM Torque, and to meet noise regulations. [Color] There was a rumor that it was attached as a supplemental device just for clearing, and I wanted to try it anyway, so I cancelled it with Can Sera-.
In my initial fantasy, I had imagined that the engine would be smoother, the low RPM Torque would not drop, and the mid RPM and above would be more powerful.
The doldrums have decreased, so it depends on the person. "Easy to get on" I think some people may feel that it's not for them, but it didn't suit me and I had to return it.
I guess the impression would be different if a Full Exhaust System is installed and the fuel adjustment is done by ECUTune.
It seems that the GSR750's exhaust Device was an auxiliary device properly installed to earn low RPM Torque.
As a side note, I had a very hard time getting the exhaust Device Wire back and getting the exhaust Device to be recognized correctly (no FI error).
View detail
It works fine on UniversalRiveter!
[How is it used?
I purchased this Rivet to reinforce the Belt of the Motorcycle Cover because it had come undone and fallen off.
How was your experience with it?
It worked fine on UniversalRiveter.
How did it compare to other products?
To be honest, I can't tell the difference from other companies' products.
[Points to note]
The Sizes are finely divided, so you should buy the right one for your application.
▼Quantity:Set products are fine, but I don't use them very often, so I buy them each time I need them.
View detail
Fixed Chamber
Used for vibration control and fixation of Chamber fixing section.
It is a fairly stiff rubber that does not seem to shake that much and can be fixed in place in a good way.
It doesn't look bad.
View detail
Fixed Chamber
I bought this for the Joint of Chamber and Bracket for fixing.
The construction looks good. The fixation also seems to be fine.
I wish it was cheaper.
View detail
The flanged style O2 sensor bung allows for an easier and cleaner weld
About quality and texture, I can confirm that the quality is great and that the material used is raw finished cold rolled steel. About the feeling of use, The flanged style O2 sensor bung allows for an easier and cleaner weld. A necessary addition to allow for the installation of an O2 sensor onto the exhaust pipe. Perfectly sized to allow for welding and threaded to accept the DynoJet wideband O2 sensor. Products to buy together, To allow for the sealing of this O2 sensor bung once the tuning has been completed and the wideband O2 sensor removed, it would be ideal to add a O2 sensor plug bolt to your cart. Difficulty of installation, I can say the fitment of the O2 sensor bung was out of my capabilities as I cannot weld. I marked the desired location then removed the exhaust pipe and took it to my local fabricator to have it welded into place.Cost performance and comparison with other products, The pricing of the product is great. You receive a cheap O2 sensor bung made of a suitable material with a smarter design to easily secure it to the exhaust pipe with a clean weld. Other brands offer higher priced options but I am satisfied with my choice. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
A necessary addition to allow for the installation of an O2 sensor onto the exhaust pipe
About quality and texture, I can confirm that the quality is great and that the material used is raw finished cold rolled steel. About the feeling of use, A necessary addition to allow for the installation of an O2 sensor onto the exhaust pipe. Perfectly sized to allow for welding and threaded to accept the DynoJet wideband O2 sensor. Products to buy together, To allow for the sealing of this O2 sensor bung once the tuning has been completed and the wideband O2 sensor removed, it would be ideal to add a O2 sensor plug bolt to your cart. Difficulty of installation, I can say the fitment of the O2 sensor bung was out of my capabilities as I cannot weld. I marked the desired location then removed the exhaust pipe and took it to my local fabricator to have it welded into place.Cost performance and comparison with other products, The pricing of the product is great. You receive a cheap O2 sensor bung made of a suitable material with a simple design to secure to the exhaust pipe. Other brands offer higher priced options but I am satisfied with my choice. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Replace with new one
The bolt was also replaced along with the installation of cushion rubber at the chamber fixation point.
If the shape and Size fit, it could be fixed with a substitute.
View detail
exchange
The bolt was also replaced with a new one along with the installation of the rubber in the chamber section.
Size, if the length fits, it looks like a good substitute.
View detail
Heat Resistant Rubber for Exhaust Silencer
This is attached to the fixed part of the Silencer to prevent vibration and scratches.
It doesn't look bad and the price is not that bad.
I wish they would sell it in a Material with a higher heat resistance temperature.
View detail
Fast delivery and safe packaging
I bought it directly from Korea, but it was packaged neatly and safely, so it arrived quickly and I was able to receive it. I barely bought the last one left in stock and was able to install it perfectly on the variable valve. If other people need it, it would be nice to purchase it. -------------------------------------------------- ------ It was a fastball in Korea, but it was packed neatly and safely, so I could get it quickly and received it. Powered by Google Translator View detail
Glass Wool Replacement
I purchased this Rivet set to replace the Glass Wool on my Striker Bolt on silencer that I bought used about 5 years ago. This Rivet set is the same silencer as the Full Exhaust System, with 11 4mm diameter Rivets to hold the IN and OUT pieces, 4 reinforced Rivets to hold the Boomerang to hang the spring for fixing, and 2 small diameter Rivets to hold the JMCAPlate. There were two small diameter Rivets to hold the JMCAPlate. I did some research beforehand. [Contents] However, the Silencer I have from Bolt On does not need a Rivet to hold the Boomerang, and the shape of the IN side piece seems to be different, so I needed a 4.8mm diameter Rivet to hold it (I bought it used, so it may have been modified). (I bought it used, so it may have been modified.) In the end, we used only 5 Rivets to fasten the OUT piece, and had to buy a new Rivet to fasten the IN piece.
This Rivet is a Material:It seems to be a ShieldType of Stainless Steel, which prevents the ball of the head of the shaft from falling inward, so that no relics can fall inside the Silencer.:The Stainless Steel construction requires a bit of force to fasten, but I was able to fasten it properly with the Hand Riveter.
Quantity:We only used a portion of the Set, but the five we did use stayed in place nicely, so we are satisfied.
View detail
Fits: YAMAHA SR400 19, YAMAHA SR400 19, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500
I had my doubts.
TorqueValve was recommended to us by a friend, and we installed it when we replaced the exhaust pipe. I could feel the increase in RPM and the torque feeling. I am glad I installed it. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI Z900 (KZ900), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z900 (KZ900), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000
Purchased to protect stud bolt of Exhaust System
I purchased this for Stud bolt protection as it was not originally included. I recommend it for its accuracy. View detail
High key DeviceCan Sera- installation by Katana
Installed to prevent Axel don't-kick
I put it on because the posts said it worked.
I think it's only going to get a little better.
Computer is being rewritten, so it may not be as effective as it could be.
Some people seem to be worried about vehicle inspections.
It seems to be fine since it is fully open during Idling.
View detail