Reviews
GOOD GOOD Glass Wool Acoustafil
Cutting is accurate and no cutetc. is required.
The Glass fibers are braided and compressed thinly, so there is virtually no scuffing of the Glass fibers.
(but protective equipment is still required)
The compressed Seat is temporarily fixed with Tape and expands with heat after assembly.
The work of putting it in the tube is easy.
The purchase cost is usually a problem instead of the difficulty of the work being reduced compared to Glass Wool.
Silencer parts removal & disassembly, Rivet removal by Drill,
Rivet re-fixing, hole alignment, and removal of remaining gasketetc. using special tools,
Parts matching checks and other su-kills are necessary.
One 1100mm-long Seat is equivalent to one Silencer.
Two Silencers would require two pairs.
View detail
I like this one.
I use this one every time.
In this case, it is used for yz85 Silencer.
It is a moderately sized product, but it is Large sturdy without wrapping all the way around.
View detail
Fits: HARLEY-DAVIDSON Universal
TE250i for Silencer.
I purchased this Glass Wool because the Exhaust System sound of my TE250i was getting DrumstickDrumstickDrumstickDrumstick noisy.
Silencer removal
↓
Remove 4 Bolt and pull out the contents.
↓
Wrap new Glass Wool and temporarily fix with masking tape
↓
Assemble in reverse order to complete.
(Gloves, Mask and Glasses are required)
After the replacement, the volume became quieter with a thump-thump-thump.
If you are looking for Silencer for KTM/Husk/GasGas system, this productQuantity:The large size can be replaced twice in 1 pc! (I think it costs about 5,000 yen if you buy OEM product)
Now I'm hoping for durability.
View detail
Used for Overhaul
It was used for Overhaul in conjunction with the disassembly of Silencer, which was suspect.
As described in the product description, the stinging when wrapping was kept to a minimum, and the work proceeded smoothly.
However, it is just hard to stick, but not totally impenetrable, so I think working quickly is HANG.
However, the work efficiency is a world of difference, so although it is a bit expensive, it is recommended.
View detail
The volume and sound quality is about what I imagined.
Used for SpenserMODEL by Mizuno Motor.
I used this product to take care of warming up first thing in the morning, but to be honest, I wanted it to be a little quieter.
There is some resignation because it is unavoidable due to the structure (^-^;)
Construction is at Beginner Level, Band for fixing (Needle Gold) The product also comes with a "M" and I think it is safe to buy it.
View detail
Used to replace Exhaust System Glass Wool in RZ.
Due to the accumulation of unburned oil in the exhaust system of RZ250, the exhaust sound has become loud, so we decided to replace the glass wool wrapped around the silencer.
DAYTONA's Glass Wool is a repeat because of its excellent cost performance in terms of price, texture, and quantity.
The OEM exhaust system for RZ is not needed in such large quantities, so if you buy DAYTONA's Wool, you won't have any problems for the time being.
The included Wire to secure the Wool around the perimeter is helpful. The quantity is also sufficient.
View detail
Toshi TECSilencer.
It fits Toshi TEC's Carbon silencer. The bore fits perfectly without any problem and without any need for fixing. I was able to restore the original quiet and light sound of the Titanium without any trouble since I could easily finish the prickling work just by trimming the length. Bean-jam-filled wafers in two pieces vertically (Monaka) The time and work required to push the material into the mold was reduced. The structure and material shape make it virtually impossible to push in the material. View detail
Used to replace Wool on external Silencer on KSR2
I replaced the external Silencer on the KSR2 as the exhaust noise was getting too loud.
We used mostly Wool here because we needed an unexpected amount.
The effect has been perfect, and I think I have become a little kinder to my neighbors.
Repeat if it becomes noisy again.
Caution
As expected of Glass Wool, bare hands are strictly prohibited for work.
It is always safer to work in long sleeves, gloves, masks, and protective glasses.
View detail
Glass Wool Replacement Challenge
The Silencer of HUSQVARNA's TE250, which I always use for forest road touring, was getting noisy, so I bought this Glass Wool and replaced it. I thought I needed a Riveter for HUSQVARNA's TE250 because the Silencer can be disassembled with Bolt, but I didn't need it.
Also, Wire is included, so there is no need to purchase it separately.
Glass Wool is very easy to work with, just wrap it around and secure it with Wire.
I listened to the sound after installation, and my impression was that there was honestly not that much difference.
However, I am feeling Large satisfied to be able to change it to a new one because it was Glass Wool that I had neglected for many years.
View detail
KSR80 PROs KillSilencerGlass Wool Replacement
I bought a used KSR80 with an external (PRO's Kill) Silencer, not OEM, but the volume has become LARGER and it is disturbing my neighbors.
We decided to replace Silencer's Glass Wool for sound deadening.
We selected DAYTONA's products because they are the most plentiful and inexpensive, although several companies offer Wool.
Silencer for PROs Kill is ScrewQuantity:The work itself is very easy as it can be disassembled with 2pcs.
After disassembling and rewinding, it was finished (I didn't get a picture of the finished product because my hands were so dirty). 。
To muffle the sound, wrap the silencer tightly with wool so as not to create a cavity in the silencer, but because the silencer of the PROS Kill is oval in shape, it is used in large quantities.
The DAYTONA Wool we purchased this time was the largest size we could find, but we still used it up almost completely.
After the replacement, the volume has gone down and we are satisfied.
Since the KSR80 is a 2CycleEngine, as the oil permeates the wool over the course of the run, the volume will gradually become louder and the oil will skip pitches, so it is important to change the oil periodically.
View detail
Fits: HARLEY-DAVIDSON Universal
Silencer Inner Replacement
I bought this to replace the Glass Wool on Striker's Bolt on silencer that I purchased used about 5 years ago.
Since there was information that Ceramic coated Glass Wool is more durable, we wanted to use Ceramic coated Glass Wool for all of our Glass Wool if possible, but since it would be over our budget if we had the necessary amount, we initially thought of using a combination of DAYTONA's Ceramic coated Glass Wool and this product. However, the budget for the required quantity was over our budget, so we initially thought of using a combination of DAYTONA's Ceramic coated Glass Wool and this product. However, we saw information that stainless wool wrapped around the punching part improves the inner durability, so we purchased additional stainless wool, and decided to combine stainless wool, DAYTONA's Ceramic coated Glass Wool, and NeoFACTORY's Glas Wool. We decided to use a three-layer structure of stainless wool, DAYTONA's Ceramic coated Glass Wool, and NeoFACTORY's Glass Wool.
For the wrapping method, relying on the information I found on the Net, I wrapped it with moderate strength, made the inner thicker than the silencer outer, pushed it into the outer to compress the glass wool, wrapped two rounds of stainless steel wool around the punching part, wrapped the needle gold around it and fixed it in place. Then, I wrapped the punching part with Stainless wool twice and fixed it by wrapping the needle with Gold, wrapped the Ceramic coated Glass Wool from DAYTONA on top of it, and finally wrapped the Glass Wool from NeoFACTORY and fixed it by wrapping the needle with Gold to complete the Silencer. The sound was not so different from before the Silencer was replaced, partly because the condition of the inner was not so bad before the replacement.
The Glass Wool is large enough, so we decided to use 3 layers of Glass Wool, which resulted in a small amount of remaining material. I am not sure how durable it will be in the future since it has just been assembled, but I am very satisfied with the low cost of the project.
View detail
Silencer Inner Replacement
I bought this to replace the Glass Wool on Striker's Bolt on silencer that I purchased used about 5 years ago.
At first, I was thinking of using this Ceramic coated Glass Wool in combination with NeoFACTORY's Reasonable Glass Wool, but then I saw information that the durability of the inner lining would be improved by wrapping the punching part with Stainless wool. However, we decided to purchase additional stainless wool, and to use a three-layer structure of stainless wool, DAYTONA's Ceramic coated glass wool, and NeoFACTORY's glass wool. For the work, we wrapped two rounds of Stainless wool around the Punching part, wrapped and fixed the needle Gold, wrapped this Ceramic coating Glass Wool on top of it, and finally wrapped NeoFACTORY Glass Wool, wrapped and fixed the needle Gold, and fixed the Punching part. The Silencer is now completely filled. I relied on the information I found on the Net about how to wrap the Silencer, but I read that too loose or too tight would damage the muffling effect, so I decided to wrap the Silencer with moderate strength and then make the inner thicker than the outer Silencer to compress the Glass Wool by pushing it into the outer Silencer. I made the Inner thicker than the Silencer Outer and pushed it into the Outer to compress the Glass Wool. The sound was not so different from before the replacement, partly because the condition of the inner was not so bad before the replacement. The Glass Wool is coated with Ceramic Coating, which is said to be highly durable, so I have high expectations for it.
View detail
Replace Silencer's Glass Wool
I bought this to replace the Glass Wool on Striker's Bolt on silencer that I purchased used about 5 years ago.
At first, we were thinking of a two-layer structure of Ceramic coated Glass Wool and Reasonable NeoFACTORY Glass Wool, but then we decided that it would be better to use Stainless wool for the punching from the standpoint of durability, and we purchased additional Stainless wool. However, we decided that it would be better to wrap the punching with Stainless wool for durability, so we ended up with a three-layer structure consisting of Stainless wool, Ceramic coated Glass Wool, and regular Glass Wool.
It would have been nice if we could have used only DAYTONA's Glass Wool, but the Cost would have gone up if we tried to have the necessary quantity, so we decided to use it in combination with Reasonable Glass Wool.
I wrapped the Stainless wool around the Punching, then wrapped this Glass Wool around the Punching, and wrapped the third layer of NeoFACTORY Glass Wool around the Punching. I found it difficult to find information on how tightly or loosely to wrap the NeoFACTORY Glass Wool, so I decided to wrap it moderately tightly, make it thicker against the outer layer, and compress the Glass Wool by forcing it into the outer layer when I put it back into the outer layer. When I played the engine, I felt that the volume was not so different after the replacement, partly because the condition of the Glass Wool before the replacement was not so bad.
I was prepared for a lot of glass fibers to scatter when working with this product, but I found it to be very easy to use.
View detail
Silencer Inner Replacement
I bought this to replace the Glass Wool on Striker's Bolt on silencer that I purchased used about 5 years ago.
At first, I was thinking of using DAYTONA's Ceramic coated Glass Wool in combination with NeoFACTORY's Reasonable Glass Wool, but when I rose the Silencer, I found what looked like Stainless wool wrapped around the Punching part. However, when I rose the Silencer, I found what looked like Stainless wool wrapped around the Punching section, so I decided that it would be better to use Stainless wool wrapped around the Punching section.
The product I received was smaller than I expected, but when I spread it out, it was long enough to wrap around the Punching part twice, and it was just right. Then, I wrapped NeoFACTORY's ordinary glass wool on top of it, and wrapped needle gold on top of it to fix the Silencer.
I have tried to play the engine, and the sound was not so different from before I changed the contents.
View detail
I was concerned about the volume and hadn't replaced it in a long time.
Used for Silencer of AfterMarket's Exhaust System that is being replaced.
Silencer Full Length (Cylinder part) Used for 470mm, Silencer outer diameter 110mm, Inner pipe outer diameter 54mm.
Quantity of this item:1 pc. Min (500mm×1100mm) The guideline for the amount to be used in the "Punching pipe 54mm, 120φSilencer" was the same as that for the Wool, but the Wool was able to fit without excess. The total length could also be fit without any problem by lightly pushing it in.
As described in the description, it is in the shape of a seat and easy to wrap around inner pipe. I worked with bare hands, as it says it is non-scattering, and it was easy to work with, with almost no stinging pain characteristic of glass wool.
If durability is not a problem, I would use this product again next time.
View detail
Acoustafil is easy to handle and great!
It doesn't tingle, it doesn't fly around, is it really Glass Wool?
It is so easy to handle that
I used protective Glasses, Mask and Vinyl gloves just in case, but I didn't need them!
However, when cut, fiber ends will come out, and if this happens, it is no different from regular Glass Wool. Be careful to cut as little as possible.
The price is much higher than other products, but the ease of handling is unmatched, so I think the cost performance is high.
I will definitely use Acoustafil again next time!
View detail
Fits: HARLEY-DAVIDSON Universal
It is inexpensive and appreciated when using larger quantities.
[How is it used?
When I restored my Honda XR250, a famous car from a bygone era, I found that the external exhaust system that had been installed since the day I received the car was not working properly in today's environment. Noisy Exhaust System. I purchased this product to muffle the sound as much as possible because it had become a
Was the one you received as per Image?
It was exactly as it looks, Glass Wool (GlassMatte), so it was just like Image.
How was your experience with it?
"twill weave" The fabric is not woven into the fabric like other fabrics, so it is easy to unravel, which is both a merit and a demerit.
The price is low for that reason, and it is a very nice product when you want to use it in Large quantities.
[Points to note]
If the frayed glass fibers get on your skin, they will sting, so it is best to wear disposable rubber gloves and avoid exposing your skin to the elements when working.
It is even safer if you also wear a mask to avoid inhaling through the nose or mouth, as they are easily disintegrated.
How did it compare to other products?
It is a large quantity and inexpensive, and is a great product for use in exhaust systems and other sound deadening measures.
Other items that would be helpful
Point and hang of installation
However, if the coil is left rolled and assembled without being secured, it will be unevenly distributed due to exhaust pressure or will gradually scatter during driving.
After winding the tape strongly, I think it will last a little longer if it is wound GRUGRU with fine needle goldetc. to prevent it from shattering.
[ITEMS TO BUY TOGETHER
However, it is important to prepare tools for disassembling the Silencer part of the Exhaust System (Chamber) (Drill for disassembling the Rivet stop, Riveter for assembling the Rivet stop, and Rivetc. of appropriate size). Riveter & Rivet of appropriate size).
After that, it might be a good idea to have a fine needle Gold as mentioned above.
[Opinions and requests to Manufacturer
I have purchased several times because of the quantity and low price, please continue to offer them at low prices.
View detail
Glass Wool by Inner silencer
The quantity is sufficient. It was also effective. View detail
It was harder to put on than I expected.
I used to use the hand-wrapped type for the replacement Glass Wool, but I bought this one-piece molded type to try it out.
However, it does not fit well in the Silencer I have.
Something like Large.
I managed to attach it by peeling off one roll of the outside.
I guess it was bad luck....
View detail
It was as advertised.
The original was Steel wool and Glass Wool, but only Glass Wool was available for vehicle inspection.
The heat from the exhaust air caused it to expand, so we didn't have to be too careful with the wrapping method to muffle the sound, and there was no stinging after the work was done.
There is also a quantity for two times.
View detail