Reviews
There is no grief if it is prepared
I bought it as an insurance policy in case of emergency.
The deciding factor in my purchase was. Comes with auxiliary rope and additional Hook." It is
View detail
Camping touring essentials
I use it to hold my camping seat bag securely in place. It is very useful and easy to release. View detail
To increase capacity when the need arises
The mesh is so fine that I don't think the luggage will fall out.
I was not sure about the large size, but it can be adjusted by attaching hooks in the middle without hooks on all four sides, so I think a slightly larger size is fine.
The rubber part is also firm and does not seem to deteriorate over time, so I think it can be used for a long time.
The Hook itself is also covered, so it is not likely to cause any damage to the motorcycle.
View detail
Is good
I bought this for fixing the Rear bag when doing RonTwo.
This is a Type that is co-tightened with the License Plate.
Easy to install and use with no problems.
View detail
![Grip Heater 115 [Grip Heater: Repair Parts]](https://img.webike-cdn.net/catalogue/images/31601/08t50hane01_01_TS.jpg)
I'm ashamed to admit...
I'm ashamed to admit that I put the Grip on before I put the Controller on, and now it's too late.
It is impossible to remove it again with reusable Level, so I had to buy a new one at Repair Parts.
The result was expensive, but the Quantity:I'm glad it's still better than buying 2 Set. (;^ω^)
View detail
Change of Mood.
The exchange was smooth and simple. The color is black, unobtrusive and simple, and the Rubber Packing (Nut blindfold) is also included.
It's good
View detail
a net for small luggage
Products that clearly knot quality and texture information Feeling 125 is not easy to fix to Monkey 125 The design information is elastic because it is made of rubber Size Chart Information 40x40 Cost performance and comparative prices with other products are well structured WeBike packaging is always great. Arrives in a week for delivery and packaging Please consider the size of your concerns, precautions, and advice when purchasing. It consists of six hooks and is made of rubber, so the bike is running and the luggage is moving little by little View detail
Use as a cargo hook Size is also unobtrusive and fashionable dress-up!
Quantity attached to the Main pipeCover of CROSS CUB110 (JA60):Pair (for Left and Right) Remove the screws at three locations each,
I changed to License bolt to use it for Carco Hook.
The size is just right for hooking Cargo Net or Elastic band.
I am concerned that the Center cover may be damaged, but I would like to find something to protect it.
Main pipeCover Screws are available in M5 and M6.
M5 screws have a gap of about 10mm, while M6 screws have a gap of about 5mm,
NylonSpacer and NylonBush are available.
This will hold it firmly in place without any rattling.
View detail
perfect
excellent purchase,easy installation, original accessories are always a guarantee, congratulations to Webike for their availability and precision. Fabio. View detail
Used as anchor bolt for REBEL250
It was used as an anchor bolt for REBEL250.
Recent Motorcycle has no Loading Hook because of CostCut.
It will be installed as a retrofit, but the car-specific products are quite expensive,
We think it is a good idea to use such a Universal Product.
This product comes with a 30mm Bolt, but with a slightly shorter exit allowance,
A separate 35mm Bolt will provide the same amount of output as the OEMBolt.
(Even Bolt with "Included Parts:" can be used as long as it is firmly tightened.)
One note on installation.
For OEMBolt, after removing one part, temporarily fasten this product and then remove the next part.
If you remove the Bolt holes in two places at the same time, the Bolt holes will shift, making it difficult to install and licking the Screw holes.
Also, the OEMBolt is tightened at a ridiculously high Torque, so it is hard to loosen the Bolt.
If you find it difficult, you should honestly ask Shop for help.
View detail
Fits: HONDA PCX HYBRID, HONDA PCX e HEV, HONDA PCX160, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX
Unity in Endurance
Purchased at the same time as Endurance Custom seat. The specs are the same as in the product picture. I am satisfied with the Large size. I am satisfied with the design and functionality. View detail
Durable, long-lasting and fully functional!
[How is it used?
I purchased the cord from longtime seller TANAX because I needed it to secure large luggage for touring etc.
Was the one you received as per Image?
It is more solid and sturdy than Image.
How was your experience with it?
I have been using it for quite a long time, and although there are some fluffed areas, the elasticity is not compromised, it does not break, it is durable, and there are no functional problems at all.
[Points to note]
In terms of baggage, it is suitable for luggage with a capacity of more than 15 liters, so it would be difficult to secure it in a Small Bagetc.
How did it compare to other products?
Inexpensive competitors' products do not last long because the Rubber is stretched out or deteriorates over time, so as a result, this product, which lasts longer, is cheaper.
▼Mesh Type and this code can be used together to add even more breadth to your touring.
View detail
It looks good
Mounting ScrewQuantity clamping Number:Just remove the 2pc.
Therefore, 15 to 20 minutes of your time is all that is needed.
I chose Black because the surroundings are Black, but it is not noticeable.
There is a sense of unity.
The seat shape inevitably gapes in the front.
This position was where we wanted it.
This time, when I opened the box, I found the Package in the upper part of the box.
It was off. It was open.
I was disappointed thinking it was a return product. I also inspected the product when it was shipped.
I wonder how they are doing.
The product was fine, but...
View detail
For Helmet In Box of NC750X!
I bought the Helmet-in Pocket after watching one YouTube video of a NC750X Helmet In Box with the Helmet-in Pocket. The name of the product was carefully posted on the website, so I immediately searched for it on Webig and purchased it. I received the product and immediately started to install it. I purchased the M size, but I think the S size would have been better (the M size is also large and sturdy). I checked the installation location and then tightened it with the enclosed screw. It takes a little bit of strength, but I think it will be no problem for a healthy person. If you are a NC rider, please give it a try because you will have enough room in the box if you put a set of documents such as vehicle inspection certificate. View detail
Screw goes missing.
It is used with Pillion Bar.
Quality as a Holder is perfect!
It is well made and highly satisfactory.
However, the screws for adjusting the Large size may be prone to falling off.
If you don't squeeze it properly and drive with it loose, it will fall off before you know it.
Once it is lost, it is even more likely to fall off with other nut, etc. Therefore, it may be necessary to first apply Screw lock to the tip of the Bolt to prevent it from falling off.
View detail
Good color, good shape!
Gold in Active products is slightly more Orange in color.
Comparison of Babyface products with Gold will be posted. (Rear Sets)
As for me, I think I am MATCHING!
View detail
Standard Plate hook
Standard Plate hook, easy to install, ideal for attaching a back to a RearSeat. View detail
Fits: HONDA CBR125R, YAMAHA MAJESTYS, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA dunk, HONDA FORZA Si, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA PCX150, HONDA glom, HONDA PCX HYBRID, HONDA PCX150, HONDA PCX150, HONDA CBR250R, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA CBR250R
Convenient for hanging a small shopping bag or Helmet.
I purchased Red.
I installed this on my pcx 125 jk05. I like the fact that the limited space around the handlebar is not sacrificed since it is tightened to the master cylinder and does not require any extra mounts.
It is solidly built and has a good texture.
As it is called a "Convenient Hook," it can be used with no problem if it is just a small bag of groceries at Convenience.
Bags purchased in SUPER large quantities can also be hung, but please note that the foot space will be cramped.
It is also convenient to hook the D Ring of the Helmet during Small breaks.
I think it is such a Must-have item that Scooter should make it a Standard Equipment.
View detail
great item
I am a SR400FI user. I have been using it with Henry Begins' touring seat bag in the past, and I was quite satisfied with its versatility. It's not damaged or lost yet, but I thought it would be nice to have a spare, so I bought an additional one. Recommended for touring. -------------------------------------------------- -------- SR400FI user. Previously, I was using Henry Biggins's touring seat bag, and I was very satisfied with its versatility. I haven't been damaged or lost yet, but I thought it would be good to have extra. Recommended for touring. Powered by Google Translator View detail
Fits: YAMAHA V-MAX 1680, YAMAHA V-MAX 1680, YAMAHA V-MAX 1680, YAMAHA V-MAX 1680, YAMAHA V-MAX 1680, YAMAHA V-MAX 1680, YAMAHA V-MAX 1680, YAMAHA V-MAX 1680
The stuff is nice, but...
Paint is peeling badly.
The packaging was well done, so...
Probably scratched before packing.
View detail