Reviews
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI ST250, SUZUKI katana, SUZUKI GSX-R1000
Optimal solution for the most hassle-free power extraction
Used on a SUZUKI/GSX-R750K9. Although it was not listed in the compatibility chart, I checked the shape of the 6PWaterproofCoupler under the MainSeat for diagnostics and bought it with a bad idea. I checked the shape of the 6PWaterproofCoupler under the MainSeat for diagnostics, and purchased it on a good chance. As a result, I was able to install it without any modification and use it as an ACC power source. There seems to be no problem with the Plus and Earth being reversed, as has often been reported. (Is there a defective lot?) Bullet TerminalFemale, which is the destination of the branch from 6PCoupler, is a slightly smaller type used in the Honda series, so be careful when creating wiring.
If all you need is to get 1 pc of ACC power, there is no other product that is easier than this. It is very nice that the price is almost complete except for the wiring.
View detail
Fits: BMW C400GT, BMW C400X, BMW C600 Sport, BMW C650 Sport, BMW C650GT, BMW C650GT, BMW F700GS, BMW F700GS, BMW F750GS, BMW F800GS Adventure, BMW F800GT, BMW F800R, BMW F800R, BMW F800S, BMW F800ST, BMW F850GS, BMW F850GS Adventure, BMW F900R, BMW F900XR, BMW G310GS
Used in S1000RR 2023.
We came across this product because we were told that if we took out the power supply poorly, an error would occur in the CAN BUSSystem.
It was easy to install as it simply slots into the USB power supply located under the Tandem seat.
Cowl removal is also easy.
Although the price is high, it is a good product because it can take out the power supply without the need for any modification.
View detail
Refreshing Good for summarizing
Pre-installed with ACC linked outputs for 3 terminals, Fuse for each system, and a constant power terminal. Relay." It is
This product is easy and good to put together with Refreshing, although it can be substituted with a general 4-wire Relay.
Please be careful when purchasing the same D-UNIT as part number 98830 is a Type that does not have a constant power supply.
BodySize is almost the same, and the line extending to the battery is thicker in this product (Part No. 16075).
Texture 4 is given as -1 because this product can be attached and detached with claws, and these claws are easily broken.
(98830 has a hinged lid)
Each terminal is equipped with a fuse for safe distribution, which is recommended when installing electrical components.
View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CRF250L, HONDA CRF250M, HONDA CT125CT110 HUNTER CUB
It's very useful.
This is my second purchase. Monkey's headlight space is pretty small, but if you're looking for a clean job that doesn't refresh the wiring, this is the best. View detail
simple and easy to install
I installed Daytona Power Cable USB Type-C L-shaped connector on my Ducati StreetFighter 1098S and action camera DJI, installation is very simple and takes about 30 minutes with the included power cables, the camera is woking fine. View detail
very good
Cable set fits perfectly and is secured by a fuse. Powerless when the ignition is switched off. Suitable for connecting navigation or chain oiler. -------------------------------------------------- -------- Cable set fits perfectly and is covered by a fuse. Empty when the ignition is switched off. Suitable for connecting navigation or chain oilers. Powered by Google Translator View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA DAX125
Wiring is easy.
The color of the coupler is easy to recognize, and the 2-wire wiring makes it easier to install the Attachment. View detail
Installation
The Attachment power supply is an interruptible kit that is readily available for recent motorcycles,
I think it's good
NSR250R is easy because you can get an ACC power extraction Harness from Yahoo!
USB power supply will be installed.
View detail
Convenient
This is useful to get Attachment power. You can easily do this by looking at the YouTube post. View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CRF250L, HONDA CRF250M, HONDA CT125CT110 HUNTER CUB
no doubt
It can be connected to a standard spare Coupler for easy power removal. View detail
WR250X requires processing
2016 WR250X, but the Coupler shape and lines are Quantitative.:I bought 2pcs, same Yamaha, thinking this would work.
As a result, the Coupler shape is the same, but the placement of the lines is different, so it could not be ponned.
I was able to use it by changing the placement of the Power Outlet Port Harness line and the License Plate Light line.
The Power Outlet Port Harness line was luckily spotted at Pliers and replaced.
License Plate Light is a DaytonaBlinker Connector 040 that was left over from a Fender Eliminator conversion that didn't pull out cleanly. (3-poles) Rebuilt with item number 96197.
Processing was not difficult, but I would have given up if I had not been lucky enough to pull it off.
View detail
Fits: KAWASAKI NINJA 650, KAWASAKI ZrX1200 ZrX1200 DAEG, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI ESTRELLA 250, KAWASAKI VERSYS-X250, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Z125 PRO, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 250SL
Easy to install.
The distribution of the drareco etc.AttachmentWiring was easy. View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB500X, HONDA REBEL250, HONDA REBEL250, HONDA FORZA-Z, HONDA FORZA-X, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA VTR, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125
REBEL 1100 was also OK
Although it is not listed as a compatible model, I was able to install it on my Rebel 1100 without any problems.
When the Left Side Cover is removed, there is an OEM coupler wrapped in Vinyl Tape.
View detail
Fits: YAMAHA XSR700, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA TRACER GT, YAMAHA XSR700, YAMAHA TRACER900, YAMAHA MT-09, YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA NMAX, YAMAHA MT-09, YAMAHA MT-09, YAMAHA GDP150A (NMAX150), YAMAHA MT-07, YAMAHA GDP125 A (NMAX), YAMAHA XMAX
BirdCity155 2023 MODEL for Accessories power extraction
BirdCity155 Purchased for Accessories power extraction for 2023 model.
The products that are compatible with the BirdCity155 vary depending on the model year, such as the Wire Lead Sports 2, Wire lead Big scooter3, and Wire Lead Big Scooter 2, so those who wish to use the BirdCity155 should carefully check their motorcycle's model year and compatible products before purchasing. If you want to use BirdCity155, you should carefully check the model year of your motorcycle and the compatible product before you buy it.
Installation itself is completed by simply removing the Handlebar's Cover and inserting it into the corresponding Coupler.
This product is in addition to Wire Lead Three-necked Branch ( https://www.webike.net/sd/21958169/), the combined purchase is a Recommendation because it allows you to acquire three Accessories power supplies.
View detail
Fits: YAMAHA XSR700, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA TRACER GT, YAMAHA XSR700, YAMAHA TRACER900, YAMAHA MT-09, YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA NMAX, YAMAHA MT-09, YAMAHA MT-09, YAMAHA GDP150A (NMAX150), YAMAHA MT-07, YAMAHA GDP125 A (NMAX), YAMAHA XMAX
Used for NMAX155
I purchased this for my NMAX155 with USB and Wiring from Attachment power supply.
There were no particular difficulties during the actual installation, and the USB was successfully attached and used.
Just by purchasing this, you can easily install electrical components, so there is no loss in purchasing it considering the time and effort required for modification.
View detail
Installation location is not chosen!
Compact and good. Wiring is also easier than expected.
We originally planned to fit it in the space under the Seat, but since it is Waterproof Specification, it can be a candidate in the Front cowl.
It will come in handy in the future as a power source for the Drareco and Fog Lamp.
View detail
Excellent Product
The D-Unit is high quality and well made. It's small size allowed me to install in a very tight battery compartment to provide easy access for future power connections without having to access the battery and removing the cables to connect an accessory. This D-Unit ties into an Acess. power wire which makes power to your added accessories available only when the key is turned on. Great Product! Thank you View detail
good power supply
It is quite small than i expected and that makes easier to find the location for install power supply. I connected heated grip there and work quite well. Highly recommend product. View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB500X, HONDA REBEL250, HONDA REBEL250, HONDA FORZA-Z, HONDA FORZA-X, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA VTR, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125
This is for taking out the power supply.
Used to install DAYTONA Oil Temperature Meter and Voltmeter.
Installation is easy and immediate.
If you plan to install more than one Attachmentetc., you can use ACCWiring
It is convenient to branch out beforehand.
Incidentally, Emon power supply branch Harness (Bullet Type TerminalType) AV1.25sq
You can buy a pack of three for about 350 yen.
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250M, HONDA CRF250L
No doubt.
No doubt about it. The advantage is that the exclusive and adapted products can be used as they are. View detail