Reviews
Fits: HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000D, HONDA CRF1000D
purchasing a spare part
When I changed the Mission oil, I replaced it with a new one and used the spare, so I had to repurchase it.
If the size is right, it doesn't have to be HondaOEM, but similar products are not that cheap, so I bought the same HondaOEM Product.
View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
It does not seem to be semi-permanent. Older bodies are by confirmation.
Flywheel was replaced at the same time when I had the engine overhaul the other day.
The rust was so bad that I thought it could still be used on Flywheel if I polished it, but I was worried about its strength after polishing, so I replaced it.
Flywheel
. bouncing wheel attached to the end of the crankshaft 。 It stores the rotational energy transmitted to the crankshaft, supplies it to the drive wheels, and helps the engine rotate by inertial force.
Not too light ? not too heavy ?.
[Symptoms of a problem with Flywheel
‥
▲Clutch does not disconnect, when Clutch is connected. "Skinny Vibrations and noises with a
▲Idling is not stable and vibration increases.
By the way, in my case, the Idling was going up and down and the vibration was terrible (laughs).
→Rust....
In fact, Flywheels are basically never worn out and can often be used for long periods of time.
*On the other hand, when it becomes unusable, it is rusted, corroded or chipped. In some cases, it can be reused by polishing. However, be careful not to polish it too much because it may lose its balance.
Replacement Procedure] Large body all car models are the same. For reference.
(1) Remove the Flywheel Cover and Sprocket Cover.
↓
Screw in the head of the MagnetFly Wheel Puller.
Prepare for the MagnetFly Wheel Puller because it cannot be removed without it.
↓
(3) Since it is an Opposite Thread Screw, it is tightened by turning it counterclockwise.
↓
Screw in the puller screw. 。 Normal Thread Screw.
↓
(5) Put the Spanner between the Head and the bar, and push the bar down to easily pull it out.
↓
(6) By turning the Shaft of the Puller and pushing in the head of the Crankshaft, the Flywheel comes out in front.
↓
(7) Flywheel is replaced and assembled in reverse order.
[After exchange]
◎Vibration reduction and Idling stabilized.
◎I am also worried about the durability of the Body itself if there is rust, and I am glad that I replaced it.
Idling is unstable due to the weight change caused by the rust and the Flywheel is not rotating and timing its rotation properly.
It is rare to replace a flywheel, but if you feel something is wrong or have an opportunity to open the crankcase, you should check it.
Incidentally, the Lightweight Fly Wheel improves the engine's response when the Axel is turned, and the change in rotation is quicker when the Axel is loosened. 。 RacerSpec. and so on.
In addition, Lightweight Fly Wheel seems to have better acceleration and deceleration performance because less Energy is required to change the Engine speed.
On the other hand, it seems that some people make it heavier in order to increase the sense of pulse...
If the Flywheel is made too light or too heavy, it will not be able to control the Rose Tsuki of the Engine combustion and the Idling will become unstable.
I think the safest thing to do is to replace the OEM.
OEM is 3HT-81450-10 is the part number.
View detail
Genuine Suzuki Generator Cover Gasket
The third and final gasket I wanted to replace on the old GSX1400 2003. This is a generator cover gasket. I already had in my basket the magneto and clutch cover gaskets anyway. The part number for this generator cover gasket was found using the help pages that Webike supply and then for my own peace of mind, cross referenced with Suzuki schematics. I found the price of these was really good and better than I could source locally here in the UK, just like the other gaskets. As this was part of a larger order with many other Suzuki parts, the shipping worked out to be brilliant. Everything was very well packed and arrived via EMS in 5 days of being shipped from Webike warehouse. The packing Webike used on this was exceptional and each of the gaskets were kept together and inside a nice fat bubble wrap envelope and kept nice and flat in transit. No one wants a bent gasket for their new install, this would have been disasterous. Not how Webike pack them, so I was very happy with that. All of the gaskets were true to fitment, there was a slight wiggle room in case of wear from the existing covers etc but still fit perfectly. I always use a little gasket sealer for my own bikes so I did with this one too. Usually not needed but it does not have any adverse effect on the fitment. Now I know this bilke has gotten new gaskets on the casings I am very pleased. Onto the next service. Thanks Webike, great job guys. View detail
Fits: HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D2, HONDA CRF1000D2, HONDA CRF150R
CB250F
I am happy to work with the webike team.Actually this item i could not found in my country (Kyatsup 14MM 90084-MN8-010). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. It has not been installed yet.good for the genuine buyers.highly recomended. View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600
Fit exactly as the original part
Like the title says, it fits exactly and work just as the original part, also very quick delivery and accurate estimates from Webike, highly recommended for OEM parts. View detail
Fits: HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100N, HONDA CB1100N, HONDA CB1100N, HONDA CB1100N, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR
ปลองกันสั่นขนาดพอดีที่ต้องการเลยส่งไวมากๆ View detail
Fits: HONDA CB1100, HONDA CB1100N, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100S, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CBR1100XX, HONDA CBR1100XX
Genuine Honda part
Purchased a project bike and many parts needed. A lot of different bolt and this is one of them. The part weas easy to find using the tools that Webike provide. As this was part of a larger order with many parts, the shipping worked out to be briliiant. Fedex Express and delivered within a week from order. Everything packed neatly inside the sealed box. The threads are perfect on this bolt as you would expect. Great service and will be back View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CRF150R, HONDA CRF150R, HONDA CRF150R, HONDA CRF150R, HONDA CRF150R, HONDA CRF150R, HONDA CRF150R, HONDA CRF150R, HONDA CRF150RB, HONDA CRF150RB, HONDA CRF150RB, HONDA CRF150RB, HONDA CRF150RB, HONDA CRF150RB, HONDA CRF150RB, HONDA CRF150RB
exchange
The bolt used for installation was old, so it was replaced with a new one at the time of maintenance.
The same HondaOEM ProductBolt, sold at a reasonable price, is also helpful.
View detail
Fits: HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000D, HONDA CRF1000D
Replace with new one
The installed product was deteriorated, cracked, and about to break, so it was replaced with a new one.
It is sold by OEM Product, so it is helpful to be able to replace it with a new one.
View detail
Fits: KAWASAKI NINJA H2, KAWASAKI NINJA H2, KAWASAKI NINJA H2, KAWASAKI NINJA H2, KAWASAKI NINJA H2 CARBON, KAWASAKI NINJA H2 CARBON, KAWASAKI NINJA H2 CARBON, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2 SX SE, KAWASAKI NINJA H2 SX SE, KAWASAKI NINJA H2 SX SE, KAWASAKI NINJA H2 SX SE+, KAWASAKI NINJA H2 SX SE+, KAWASAKI NINJA H2R, KAWASAKI NINJA H2R, KAWASAKI NINJA H2R, KAWASAKI Z H2, KAWASAKI Z H2, KAWASAKI Z H2
sairista style
It is properly controlled by the latest Sa Irista system. View detail
Fits: KAWASAKI NINJA H2, KAWASAKI NINJA H2, KAWASAKI NINJA H2, KAWASAKI NINJA H2, KAWASAKI NINJA H2 CARBON, KAWASAKI NINJA H2 CARBON, KAWASAKI NINJA H2 CARBON, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2 SX SE, KAWASAKI NINJA H2 SX SE, KAWASAKI NINJA H2 SX SE, KAWASAKI NINJA H2 SX SE+, KAWASAKI NINJA H2 SX SE+, KAWASAKI NINJA H2R, KAWASAKI NINJA H2R, KAWASAKI NINJA H2R, KAWASAKI Z H2, KAWASAKI Z H2, KAWASAKI Z H2
sairista style
It's a newer, more stable control system. View detail
Fits: YAMAHA V-MAX 1200, YAMAHA V-MAX 1200, YAMAHA V-MAX 1200, YAMAHA V-MAX 1200, YAMAHA V-MAX 1200, YAMAHA V-MAX 1200, YAMAHA V-MAX 1200, YAMAHA V-MAX 1200, YAMAHA V-MAX 1200, YAMAHA V-MAX 1200, YAMAHA V-MAX 1200, YAMAHA V-MAX 1200, YAMAHA V-MAX 1200, YAMAHA V-MAX 1200, YAMAHA V-MAX 1200, YAMAHA V-MAX 1200, YAMAHA V-MAX 1200, YAMAHA V-MAX 1200, YAMAHA V-MAX 1200, YAMAHA V-MAX 1200
Exactly what I ordered
For OEM Yamaha parts, I have not found a better supplier in Australia or USA for price, or timeliness. Items arrived quickly and well packaged. Very happy. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1 Limited Edition, YAMAHA R1 Limited Edition, YAMAHA R1 50th Anniversary, YAMAHA R1 50th Anniversary, YAMAHA R1, YAMAHA R1, YAMAHA YFZ-R1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1, YAMAHA R1, YAMAHA R1, YAMAHA FZ1
Yamaha OEM Rotor Assy
The original rotor assembly for YAMAHA YZF R1 RN12 05. I bought a new rotor assembly from you. Because in my old rotor assembly, magnets spilled out directly into the motor. I had to flush the engine. The new rotor assembly is slightly different from the old version. He's so much better. View detail