Reviews
Can be used without problems
This is the first Chain Tool I bought, so I can't compare it with others, but I had no problem using it.
Since the cast surface of the Gold genus is intact, it is likely to rust the next time it is used unless it is treated against rust after use.
View detail
hang is there, but no problem.
Chain to Quantity:There is no problem with the functionality, although a hang is required to align the pins when setting. View detail
Heart breaker!
First and foremost, we must note that the BALI in the cutting process is quite bad, and honestly, it is the Level that causes injury.
If it is a FOR JAPAN MODEL product, I think it is a hesitant Level to ship the product as it is.
And it is not very good as accuracy, and the Center axis is also blurred.
However, it does not mean that it cannot be used at all. If BALI is removed sesse-sese-sese and military gloves are used, it is not impossible to use it.
However, we do not anticipate that the product will be used many times, and we hope that you will consider it as a disposable level for this time.
Personally, I would urge everyone to choose a more solid product when considering it as a tool.
well ♪ Hyakkety-yak ♪ It is possible for people who understand the concept of "Level" to purchase the product.
View detail
Chain cut
Since the installation chain is unknown, I bought a little longer and bought this one for a trial because it was cheaper here to cut it.
Although it will not be used often, it corresponds to chain size, 420 to 530, so it will be useful to have 1 pc.
It seems sturdy for the price, and seems to be fine for use.
View detail
Chain cut easily and conveniently
[How is it used?
Purchased to Cut the Chain purchased with the Restore of the LITTLE CUB that was given to us.
I used to cut the joints of the Piece with an electric sander etc., but by using this product, I can easily chain cut in a short time, which is very convenient.
Was the one you received as per Image?
This product, which is used by our friends and our shop, is reasonably priced and easier to obtain than other products, and can be used for most chains, as it is available in 420, 428, 520, and 525 sizes.
Was the installation difficult?
It may be a little confusing when you are not used to it, but if you read the Instruction Manual carefully before working on it, you will be able to cut it really easily.
It is a safe place to keep in the toolbox of those who like to Restore and those who need Setting, including back and forth Sprocket.
How was your experience with it?
If you read the Instruction Manual carefully before use, the process will be easy.
[Included Parts:were they on?
All the items are shown in the attached picture. I don't know the name of each Parts, so please refer to the picture.
[Was there anything that disappointed you?
I have only used the product a few times, but I have no disappointment or dissatisfaction with the product as expected.
Other items that would be helpful
Point and hang of installation
On the bottom of the Instruction Manual. Cutting the bolt with a cut bolt will damage the tip of the bolt. Use a sander or similar tool to scrape off the crimp. Also, be sure to position the pin so that the tip of the pin is in the center of the crimp. It is stated that
To be honest, even if you use this product out of the blue, you can cut a 420 or 428 size without any problem, but if you want to use the tool for a long time, you should use it according to the Instruction Manual.
If you are still not confident, do not hesitate to ask for a PRO.
[Notes]
With this product. "Disking operations." It is only a tool to Cut Chain.
Please make sure to confirm the number of pieces to be cut in advance to ensure that there are no mistakes.
If you make a mistake and cut too many pieces, the chain will be too short to use.
Also, do not reuse a chain that has been stretched by overuse until it is cut, because the spacing between the pieces has also been stretched, which may lead to wear and tear on the sprocket and damage to the chain even if its strength is within the manufacturer's recommended engine displacement volume. The spacing between the pieces has been elongated, which may cause the Sprocket to wear differently.
[ITEMS TO BUY TOGETHER
A new Chain, each Chemical product needed for its maintenance, and Dustcloth are also useful.
[Opinions and requests to Manufacturer
Please continue to sell this product as long as possible, as it is easy for buyers to afford with Reasonable pricing and a wide range of uses.
View detail
Another long Pin would be perfect.
Normally, I would expect to see a Pin that pushes out the Chain Pin and a longer Pin that pulls out the Chain Pin.
This one comes with only one type of Pin.
Therefore, it is necessary to push out two Pins, remove the Plate, pull it out and push the ThailandPin to the end.
That is a bit of a hassle, but for the price, this is what you get.
However, the fact that the tool is Compact is a Large change Good.
View detail
Chain cut is ready!
I purchased this product because it can cut a 530 chain from a 420. I tried several times because I did not know how to use it well, but I was able to cut the chain successfully. If there is an instruction manual, I think I can use it without hesitation. If you press the tip of the Pin against the Pin of the Chain Piece without tightening the Guide, the tip of the Pin will be distorted by the force. Pin tip was distorted by the force. Although the Pin tip is a little distorted, it is working fine so far. If you are a first time user, please work with caution.
The low price made the BALI and Screw parts sore from the beginning, but it was acceptable.
View detail
cheap
It is not a high-end product, so this is sufficient unless you use it to do everything.
If you can't seem to get the Pin out when you pull it out.
You can use it after shaving it with a grinder and it is up to you to devise a way to use it.
It is useful if you have it.
View detail
Easy to use
I think it is a good cosmetic tool.
The handle made it easy to apply force.
View detail
Necessary for Chain's Piece stuffing.
This tool is required to pack a piece of Non-Seal Chain.
When you change the number of chain pieces in Sprocket, you will need to change the number of chain pieces as well.
View detail
It is inexpensive, accurate, and safe to work with.
I bought this one after buying other expensive ones to no avail. I am satisfied with it. View detail
How is that?
When using 1 or 2 times Screw - - - Fixed with Tap and Dice after use (sweat) Screw run out after 3 rd use, it was not possible to use (Tears) After examining various things, Mr. Takekawa's Chain Tool was not well received! It was exactly right (Lol) View detail
It can break immediately with the first time
There was a set of Body and a substitute Pick.
First turn turn Screw before Chain cut and you see that Pick is bent.
Since I can not use it, I tried doing it with Cut, but it caught on pulling out and broke.
When I exchanged for a replacement Pick and turned Screw, it was not bent more than the first one.
Chain cut and tried to pull out again.
It is durable due to poor precision.
If so high things are better.
View detail
Part accuracy and durability are bad
It is typical of bad mood.
Whatever versatility is not to choose Size
Part accuracy is too bad and there is no durability.
didNon-seal (The cheapest one)
I used it to cut 525 Size.
The core is slightly bent from the beginning, it is difficult to capture the center
Furthermore, when extruding Pin, the tool side loses
The core cracked vertically, it got broken.
Although it responded with the attached spare parts,
Although it endured work,
I crooked again and I can not use it anymore.
It's almost disposable.
There is no complaint because the price is price ,,,
Conversely I was impressed with the durability of Did.
Parts pushing out the core (?) As
Small Sana Bearing has 1 pcs..
It is a part not included in Instruction Manual,
When exchanging the core, if you disassemble it inadvertently
Be careful as it will definitely lose it.
I do not know what will happen if it's gone.
View detail
Chain exchange is done
I bought it by changing my own Chain.
The texture is not good but there was no problem with the motion.
Moreover, it can be used not only to remove Pin but also for press-fitting Plate after changing Chain
So that is a good tool for that point.
View detail
To Chainfor Replacement
I've been Cut in Grinder so far but it takes time and it is troublesome so I bought it with Chain this time. The Chain Tool that I was planning to purchase was out of stock so I made it the cheapest kore. When opening for the first time I saw it was somewhat uneasy because I was not able to see things that seemed to be of good quality in flattery even though I was worth seeing at the first time. But Chain's Cut was okay as it made it without problems.
However, is the accuracy of the core pushing out Pin poor? It is Large strange to remove from Chain after Cut. I knew that it would be okay if I used it only once a year because it was missing if it was lightly touched with a slotted screwdriver.
If you do not use it frequently in business etc. I think that it is Recommendation.
View detail