Reviews
My mistake.
I had posted before that it could not be installed without modification, but this is because I installed the bracket backwards and forwards, so there is no problem at all except that it is difficult to attach the mounting screws. It is a good product. View detail
That's DAYTONA!
I guess it means that DAYTONA is the distributor of MAGGI, but the same size on Amazon is DAYTONA and Webike is MAGGI, then I should buy from Webike. So, I'll buy it from Webike.
I thought it was DAYTONA. Absolutely not." I was not saying that I wanted to buy DAYTONA products, but I wanted to avoid them because I have been making a lot of mistakes buying DAYTONA products recently, emotionally.
View detail
Processing required
The guide on the body side of the mounting bracket was not attached as it was because the body attachment part of the mounting bracket and the guide on the body side were in contact with each other. The screw fastener of the mounting bracket also interfered with the box part of the air filter when the length of the wrench was too long, so I wondered whether I should cut the wrench or not, but I loosened the box side and shifted it to close. View detail
Good feeling on Design
I was feeling uncomfortable with the lock on the SIDE of the helmet, so I bought it because I thought it was an ideal place to lock the helmet. The lock looks great on the helmet, but since I have a box on my V-SX Cali, I can't hang it on the DRing because there is not enough space to operate it, so I hang it on the band. View detail
Installed on current YZF-R25
Adding a Helmet lock would add another 1 pc of keys, so I added a Tanax Wire lock, which I have been curious about for a while.
The brake lever side is slightly adjusted and lowered, but even when fully locked, it could be installed without interfering with the LimitCowl.
I chose the Coil type, but it was harder to stretch than I expected, so I thought I should have chosen the Straight Type.
View detail
It's convenient
Installation is as simple as replacing the OEMBolt with the supplied Bolt, Washer, and Collar.
If a Smartphone Holder etc. is attached near the with Handle, the wire length may not be sufficient, so this should be considered.
View detail
Helmet is now easier to lock.
I was having a hard time using the helmet holder that I moved when I replaced the rear suspension made by Y's Gear, and when I locked the helmet, it was close to the engine, so I had to be careful about the mounting angle, etc. I saw this product on SNS and thought it looked good, so I bought it.
Tandem Footpeg and Bracket are attached by co-tightening, but our car is equipped with SSB GymkhanaBumper and Quantity:Since the Slider in the set is attached in place of the Tandem Footpeg, the Spacer included in the product was not used.
I was able to install it without hitting the frame.
The OEM lock part was available as is, so the part used in this product was Bracket Only, but I am still satisfied with the ease of locking.
View detail
Fit as per Image
I had avoided helmet locks on the SIDE because of the possibility of scratches on the part where the motorcycle and helmet come in contact with each other or with the adjacent parking lot.
This is an excellent form of locking on top of the Seat or Carrier, as it is somewhat less likely to get wet inside in the event of sudden rain, and it does not fall off, eliminating the above concerns.
The key position is fixed on the Left Side, so it would have been better if I could have chosen both. The key position is fixed on the Left Side, so there is a possibility that it interferes with the Income mounting position.
View detail
The only conforming product
It can be installed safely, and it is sent in such a way that it can be attached without Instruction Manual, and I wonder if it is conscientious. (´-) View detail
Fits: HARLEY-DAVIDSON XL1200C SPORTSTER 1200S, HARLEY-DAVIDSON NIGHTSTER
Absolute peace of mind.
No problems at all with installation as it is a dedicated product. The quality is perfect. View detail
easy to wear
I used KIJIMAHelmet Lock Assist on my Honda TACTA-AF09 and it is very easy to use! The color of the lock assist is beautiful even when installed on a motorcycle. View detail
Hard to use.
My helmet is SHOEI's X-Fourteen and it is hard to wear. The warning also says "…" for SHOEI's Small D Ring, but I am not sure how long it will last. Smaller than a small lion." It is not stated whether it is possible to install the "A" or "B", but it is difficult to do so. This is also due to a lack of confirmation on my part. There is no problem with installation on the body side.
And this product itself has no Lock Function. It is just a hook. I think this should be mentioned in the product description.
View detail
Easy to use
It is useful when you want to stop something else together with the helmet.
The quality is better than the price.
View detail
Helmet holder
[How is it used?
Simultaneous installation with Endurance Carrier
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
It was easy because the Carrier originally has a hole to install this.
How was your experience with it?
I use it whenever I park and have no problem using it.
It is easy to use
[Included Parts:were they on?
It was all there.
[Was there anything that disappointed you?
There is none
Other items that would be helpful
As with Carrier installation, it is a good idea to have Screw Lock agent available.
View detail
Fits: HONDA CRF1100L Africa Twin DCT, HONDA CRF1100L Africa Twin Adventure Sports ES DCT, HONDA CRF1100L Africa Twin Adventure Sports ES, HONDA CRF1100L Africa Twin Adventure Sports DCT, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CRF1100L Africa Twin, HONDA CRF1000L Africa Twin DCT, HONDA CRF1000L Africa Twin, KAWASAKI Ninja 1000SX
Easy to install with the License Plate space on any motorcycle.
It was installed on a CRF1100L with SIDEPannier.
Since the SIDE mounting type is impossible, I decided to use this License Plate mounting type. I still have a dream of Tandem, so I think it is good that I can lock two of them.
I wish the keys were communal to Left/Right. Also, the base plate is too sturdy and a bit heavy, so it would be great if it were aluminum.
View detail
Fits: HONDA ADV150, HONDA glom, KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, YAMAHA MAJESTYS, YAMAHA BWS(BWS), YAMAHA BWS125(BWS), KAWASAKI Z125 (16), HONDA ZOOMERX, HONDA DAX125
Without removing the Seat.
I like that it can be attached to Handlebar.
No need to remove Seat.
View detail
When parking
Easy to attach to a helmet holder when connected to a D-joint View detail
Fits: HONDA CRF1100L Africa Twin DCT, HONDA CRF1100L Africa Twin Adventure Sports ES DCT, HONDA CRF1100L Africa Twin Adventure Sports ES, HONDA CRF1100L Africa Twin Adventure Sports DCT, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CRF1100L Africa Twin, HONDA CRF1000L Africa Twin DCT, HONDA CRF1000L Africa Twin, KAWASAKI Ninja 1000SX
Purchased because I don't have a Helmet holder.
The 2012 ninja 1000 does not have a helmet holder, so I bought one instead.
The License Plate Holder I had before had a helmet holder, but when I used the Luggage Hook, there was a possibility that the number would be slightly hidden, which would be a violation of the Road Traffic Law. Therefore, I changed to KIJIMA's License Plate Holder with Helmet Holder.
After installation, NORMAL will not interfere anywhere.
In my case, I am changing the License PlateMounting Bolt to a Security Bolt.
It is better than the previous License Plate Holder in terms of refreshing, but like your review, I am not satisfied with the need to carry two Keys, so I gave it 4 stars.
I am satisfied with the rest.
View detail
Fits: DUCATI Panigale V4, DUCATI Panigale V4 S, DUCATI Panigale V4R, DUCATI Streetfighter V4, DUCATI Streetfighter V4 S
Helmet can be fixed!
[How is it used?
Because it is used without Tandem Footpeg,
There is no difficulty in attaching the Helmet to the Holder.
Was the one you received as per Image?
It is as per Image, as I used to use it on a CBR I used to own.
Was the installation difficult?
Installation was easy, as there is no Tandem Footpeg.
In order to match the color with the periphery, a separate Hexagon Socket Bolt was prepared instead of the supplied Bolt.
When adding the TankUnder Cover, a collar was added between the Holder and the TankUnder Cover, and the Bolt was also replaced with a longer one, as it interferes with the Holder.
How was your experience with it?
Because the Helmet interferes with the Swing Arm and Rear Fender, a ShopTowel is placed between them.
[Included Parts:were they on?
An installation Bolt was included.
[Was there anything that disappointed you?
I felt that it would be good to have the mounting bolt in black to unify the color with the bracket.
View detail
For those who are concerned about scratches and dirt on the helmet
[How is it used?
I have a helmet holder next to the rear tire,
I am concerned about dirt and scratches on the Helmet, so I used this one.
Was the one you received as per Image?
As per Image, although I was wondering about the Coil type Wire one,
Emphasis on Refreshing when stored.
Was the installation difficult?
Remove the two screws from the lever holder and use the screws provided.
It's easy to reapply.
How was your experience with it?
Just put the Wire through the Helmet and place it on the Tank.
So it is easy to use. No need to carry a key.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not to say I'm disappointed, but when I put away my Wire.
Slightly difficult to wrap around
View detail