Reviews
Let's put it on.
It is very effective Large. First of all, however, the smallest turning radius becomes large due to the body contact stopper, and it is necessary to turn around when turning in narrow parking lots, etc. There is no problem in driving itself.
Single-cylinder vibrations transmitted to the handlebar are reduced, making driving easier.
It is now safe to enter a rough Curve with a Gap.
It looks like a body on a top ranking.
The construction is beautiful and satisfactory for a cut-out plate.
If the price is acceptable, we recommend that it be installed.
View detail
Longed-for OHLINS
I installed OHLINS, which I had longed for.
All in all, I am satisfied!
It said that the Speedometer Cable needed to be extended, but since it is Frame Mounting, it was Large sturdy with Normal cable.
I will be working on various settings in the future.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Highly satisfying just by the look of it.
The instruction manual is not clear enough. I recommend you to watch YouTube to see the image before you start the work. The ride quality is so different that anyone can tell the difference! View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
Bolt does not fit
Processing essential
It's a manufacturer famous for its price tag that only comes off when it's not processed.
View detail
Fits: SUZUKI GSX-S1000GT
Increased stability
I was wondering if it is supposed to be run with luggage in the Pannier or in daily use without the Pannier.
We replaced the OEMSuspension because we were concerned about the firmness and rebound of the OEMSuspension, especially when going over bumps.
After replacing the ring, the shock when going over bumps is reduced and the stability at the corner ring is increased.
It also has a lowdown effect of about 15m when riding, which improves the footing. (We are 171cm tall and have a long torso, Japan human body type)
I am satisfied with the performance of the Large, but the cost of the product and labor (Red Baron) was less than 100,000 yen, so I have given it a low cost-performance rating.
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90 CM, HONDA SUPER CUB 90 DX, HONDA SUPER CUB 90 STD, HONDA SUPER CUB70 CM, HONDA SUPER CUB70 DX, HONDA SUPER CUB70 STD, HONDA CUB PRESS, HONDA SUPER CUB 50 CM, HONDA SUPER CUB 50 DX, HONDA SUPER CUB 50 STD
It will improve the ride and appearance.
[How is it used?
SUPER CUB I got used and cheap.
The SUPER CUB that we purchased was inexpensive, and the exterior of the SUPER CUB was sadly deteriorating over time...
A reliable Shop for such SUPER CUB Refresh! Tokyo Do. This time, we refresh the Rear shock, which had been in a soggy Rust condition.
The distributor is Tokyo-Do, but the manufacturer is YSS, which has become a MAJOR suspension manufacturer in Japan.
How was your experience with it?
The vehicle we acquired was a wrecked vehicle with a lot of mileage, so it was a simple matter to get a new one. Compare with OEM Product." The body of the car was squishy, but the movement of the body was crisp.
The included adjustment tool allows for 5 levels of pre-road adjustment, but in my case, the lowest factory setting was sufficient (I think the lowest setting is a little stiffer than OEMRear shock).
Another good point is that since the entire product is made of plating, it can be installed without any discomfort regardless of the color of the car body.
How did it compare to other products?
Several companies sell shocks in the same price range, but since this is the first time I have replaced the rear shock of my SUPER CUB with an Other Brand Product, I am not familiar with the MeritDemerit of each.
I wonder if there is no problem in coordinating with the car body color. I think so.
If you are interested in the behavior of the car when you drive on the circuit or push it to the limit, you may be more satisfied with the more expensive Rear shock.
[Points to note]
Not so much as a precaution, but to ensure safety during installation, to grease up moving parts, and to install with the proper torque, etc.?
This product is Ironware. The product is a plated product, so it can be enjoyed in a beautiful condition for a long time if you continue to take measures against rust, such as wax & coating, dehydration after driving in the rain or washing the car, etc.
Other items that would be helpful
The deciding factor in the purchase
A friend of mine who is a CUB friend was using this product (BodyPlating/SpringBlack) and gave it to me for a test ride because it looked good.
[How is it used?
I'm a city rider Main, and I'd like to take a slow touring to the north Large land by CUB someday, but it would be tiring........
【Included Parts:presence or absence】.
Rear shock absorberQuantity:Pair (for Left and Right) and a tool for pre-road adjustment are included in the package.
Also included was a YSS Decal and a brief instruction manual?
[ITEMS TO BUY TOGETHER
If you have a budget to spare, you can also use the Tokyo-Do handled Front Reinforced Sport Shock Original YSS and refresh both the front and rear for a more stable driving experience.
The Front is hidden and barely visible from the outside, but it is performance oriented.
Opinions and requests to Manufacturer.
The price is relatively affordable, and the product is easy to understand as a first step in Custom & Restore, so please continue the lineup.
View detail
Fits: YAMAHA SR250, SUZUKI 250SB, HONDA 250T LACustom, HONDA AX-1, HONDA CL135, HONDA CL350, HONDA CL72, HONDA CL77, HONDA CM250T, HONDA CM400T, HONDA CRM250AR, HONDA CRM250R, HONDA FTR223D, HONDA FTR250, HONDA GB250 CLUBMAN, HONDA GB400TT, HONDA GB500TT, HONDA MT250ELSINORE, HONDA MTX125R, HONDA MTX200R
It doesn't fit.
I bought it because it was supposed to fit the XL-DEGREE, but it didn't fit the Size. I was too busy with work and I didn't know where Caliper had put it, so I made the mistake of buying it on trust. View detail
Fits: KAWASAKI Old Z series, KAWASAKI ZEPHYR1100, KAWASAKI Z900 GP ALL, KAWASAKI Z1000R, KAWASAKI Z750GP, KAWASAKI Z1-R/Z1-RII
Longed-for OHLINS
You have to buy it here at Timing.
I thought I might not be able to buy anymore.
I bought it at a limited time Sale.
If Spring is Yellow color, the overall balance is….
So, after much deliberation, I decided to go with Black.
You can tell right away that the quality of the product is good.
We are still only installing it,
We will do a test run at a later date to decide on adjustments, etc.
I think
View detail
Come with heavier rated springs, preload adjusting collars, rebound adjusters and the looks
About quality and texture - The twin shocks from YSS are made from machined billet aluminium featuring an all black anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - This rear suspension features a spring rate that is specific for a weight range which makes it simple to choose from the two options available. Obviously way better then the original units with there heavier rated springs, preload adjusting collars, rebound adjusters and the looks when fitted to any of the coloured Monkey 125 give that custom appearance. Products to buy together - The suspension on the Monkey 125 would have to be the worst part of this mini moto, so after the purchasing of this quality rear suspension the essential product to purchase to complete your suspension upgrade would be the YSS fork damper kit that can by purchased via the non-listed item quotation here on Webike. Difficulty of installation - The installation of the twin shocks is a simple task that took 0.5 of an hour to complete. Mechanical aptitude and the use of basic hand tools is what is required to secure the rear suspension between the frame and the swingarm. Cost performance and comparison with other products - I find the cost of all the products YSS sell to be on par when compared to what most other companies sell their products for and the twin shocks are no different. About shipping and packaging - With there being no option for sea freight or EMS for the twin shocks, I had to chose FEDEX which is priced higher then I like to usually spend on shipping. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Lowdown
After much deliberation, I decided to go with EFFEX and it was the right choice.
Thanks to the fact that it is a little more than two centimeters lower, it will stick with sticky feet.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI KATANA
I can work on it myself, but it's more difficult.
Link Plate was replaced while supporting the car body with Panda Jack using only Side Stand.
Both foot tongs are now attached up to the ball of the big toe and feel more secure.
Since the rear was lowered, the front fork also protruded 1.4 cm.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI KATANA
EFFEX Lowdown Kit
Even 2cmDown makes quite a difference in the sense of security.
Quantity:I think Set's STAND is also sturdier and better made than OEM.
View detail
Great product
Fits well View detail
tw200
[How is it used?
Touring
Was the one you received as per Image?
YES
Was the installation difficult?
Easy
How was your experience with it?
Very good
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub].
Formative Lantern CUB
The work is difficult! Special tools are required. If you don't have it, you can't do it! First, you need to remove the front wheel, then the front cushion, and then use a special tool called a spring compressor. I recommend the Straight Coil Spring Compressor for Motorcycle, which can be used on an AXIS light truck and an NVAN. I received this compressor as a prize from a magazine. I have been using it for more than 10 years. I have been using the NTB product Moldy gave me for 1000 yen before, but this time I had a chance to use this product. View detail
MaBirds SpringKit
The Integra front shock was replaced because it was soft and the reduction force was not very effective, causing the Under Cowl to rub all over the place.
It is much better.
View detail
Obviously way better then the original units with there
About quality and texture - The rear shock absorber from Ohlins is made from machined billet aluminium featuring gold and silver anodized surface finishes with yellow painted springs, the quality from the overall fit and finish is perfect. About the feeling of use - Obviously way better then the original units with there heavier rated springs, preload adjusting collars, rebound and compression adjusters. This rear shock absorber offers multiple spring options so everyone is covered for your weight and riding style. Products to buy together - After purchasing this rear shock absorber the next flaw in the rear suspension system is the swing arm pivot bushes that restrict movement. The purchasing of a swing arm with bearings at the pivot points will complete the upgrade. Difficulty of installation - The installation of the rear shock absorber is a simple task that took 0.5 of an hour to complete. Mechanical aptitude and the use of basic hand tools is what is required to secure the rear shock absorber between the frame and the swingarm. Cost performance and comparison with other products - I find the cost of all the products Ohlins sell to be higher then what most other companies sell their products for and the rear shock absorber is no different, but this is due to the high quality materials used and the consistent high quality finish of their products. About shipping and packaging - With there being no option for sea freight or EMS for the rear shock absorber, I had to chose FEDEX which is priced higher then I like to usually spend on shipping. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Good work.
After all, OHLINS goes well with this.
The cut-outs have a great impact on the appearance at this price.
KA739 Strong gold on Z900RS SEOEM
Impact looks awesome!
View detail
Fits: HONDA MSX125SF, HONDA MSX125, HONDA MSX GROM, HONDA GROM
On the Grom JC92.
I feel that the Pre-road only adjustment is not enough.
The price seems to have gone up quite a bit compared to a while ago.
With this quality, you can get about 12,000 out of it.
Oil damper moves too fast by far when assembled and moved.
Orrifice is too Large in both COMP and TEN.
There are higher-end models with full-length adjustment, but as shown in the photo, the NORMAL and
This is fine for JC-92 as it does not change.
I was going to build it in inverted and lighten it under Spring, but Pre-road.
I gave up before I started messing with it.:If you get a Set, it can be the other way around, but it's pretty good.
I guess I don't care about this level of low-cost products anymore because I will remove parts.
When I first built it with Spring free length, it sank 1/2 of the car body with only 1G.
Finally, the Pre-road comes to the photo.
Originally, sagging was a bit of a hassle since the strokes were extremely short.
Tomorrow I will also tinker with the ZX-14R.
View detail
Logo will soon become Brown.
I used it for upright Fork.
I have no complaints about the product itself, such as the Tie WrapGap prevention, easy installation without removing the Tire, etc., but the Logo turns Brown quickly.
Other than that, I really have no complaints, it's just too bad.
View detail