Reviews
OEM Parts Number is obsolete - -
Since OEM Parts Number is not available due to the obsolete number, it is purchased as a substitute item.
Dimensions are nearly near, comparable in performance.
Large I am satisfied with the change.
Likewise, we recommend to those who do not get the parts.
View detail
Let's exchange hardened Hose
Vehicles whose age has passed have been hardened by the Rubber family. Since my GSX - R 750 is also solid in various places, I am promoting timely replacement. View detail
L-Type
I was looking for an L-Type Fuel filter and found it and bought it. With Magnet it is safe even if foreign matter is mixed in. Since it is a consumable item, I exchange it after using it to some extent. View detail
Early exchange is the Recommendation.
Purchased with expectation of durability and freedom of handling. It was flexible and easy to handle, but curing and shrinkage were observed as a result of using 1 Season with 4 cylinder 1200 cc ~ Motorcycle. Although it was not hardening to break, if the outside diameter 11 mm is 9. It had shrunk to 7 mm.
I think that there are differences depending on the usage environment and Motorcycle, but I think that it was better to check the status periodically.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, Others CRcarburetor, Others FCR Carburetor Bodycarburetor
When Fuel Hose gets harder - - -.
Buy for my GSX-R Restore. Fuel Hose was pretty hardened. Hose purchased is very soft and easy to handle. Moreover, it is inexpensive! View detail
With nothing, it is the difference of muddy.
If you are wearing this and not wearing it, you will really get a difference in serviceability. (In my Motorcycle)
Thanks to this guy it is already a good thing to thrust my hand into a difficult gap under Tank and pull hard so hard if I do not have a hard hose that is not ah..
In fact, those who remove Tank often recommend this Joint and I think that it will also protect Hose!
View detail
Fits: KAWASAKI Z400FX/Z400J, KAWASAKI Z550, KAWASAKI Z550, KAWASAKI Z400FX/Z400J, KAWASAKI Z400FX/Z400J, KAWASAKI Z400FX/Z400J
Out of print parts
I bought it because Gasoline blew up due to deterioration of Packing. The OEM Parts Number is also out-of-print a lot, RiproParts of such expendable goods is saved Large. The price was also reasonable.. I expect the durability after installation. View detail
Used in carburetor exchange
When the carburetor of DR 125s was replaced with PE 24, Fuel hose was deteriorated, so we purchased shipping fee adjustment as well. New Hose has elasticity, Gasoline goes through and there is a sense of security.
It's cheap, and I'd like to exchange regularly.
View detail
Fits: HARLEY-DAVIDSON Various types of Gas tanks with 1/4-NPTSize Cook mounting opening
I did it
Used for 2004 model XL 1200R - - - Size did not fit at all at all. I was not sure beforehand confirming Size, yes, yes. It seems like Size used for NeoFACTORY CustomTank, it is planned to change to 48Tank of the company in the future so I will keep it for Large thing so far.
View detail
DRC Fuel Hose 50cm
Since I changed Carburetor, I bought it without fitting Fuel Hose inner diameter.
Materialetc. I do not know, because the years have not passed yet, I feel good..
View detail
It is a regular replacement part
It becomes harder Hose than Pink hose of the same KITACO.
Pink hose will bend when bent, but because Green Light has more rigidity than Pink, it will not collapse.
I use Green Light and Pink differently with HoseLayout.
I just can not use the attached Clip. It is hard to fit in, and it will dig into Hose over time?
I purchase clip cheaply by Yahoo auction and use it separately and keep it in plane.
View detail
Honda OEM inner diameter 5. Used with 3 mm Fuel Hose
Installation is quite Large strange because it is for 6 mm inner diameter.
If it is not in a hurry, Fuel Filter for Honda OEM 6 mm Hose
I think you may choose 16910-GAH-690.
View detail
It is safe.
I bought it is Hose with inner diameter φ8, I use it for negative pressure Hose of Fuel Cock. Previously I used ordinary Fuel Hose but due to the heat of the Engine, it has become Cha Chi a few years, this time I purchased this item for durability. View detail
used for the VT250 SPADA of a Honda -- since it was an old vehicle type, there is hardening -- a measure -- since it was a Type cut by it although considered and exchanged, it could exchange by required die length and was saved [ who was able to use
used for the VT250 SPADA of a Honda -- since it was an old vehicle type, there is hardening -- a measure -- since it was a Type cut by it although considered and exchanged, it could exchange by required die length and was saved [ who was able to use having felt easy without the leak etc. ]
View detail
Since it is not a harder Hose which is pure, it can use in various places that it is easy to take out a motion.Since it is too soft and sometimes bends [ but on the other hand ], we cannot recommend you use at the place which requires a sudden angle
Since it is not a harder Hose which is pure, it can use in various places that it is easy to take out a motion.Since it is too soft and sometimes bends [
but on the other hand ], we cannot recommend you use at the place which requires a sudden angle and a Tension.
View detail
It has equipped that there is no futility between a Gas tank and a carburetor. There is no effect of filtration once [, such as a clog of a carburetor, ] by use about a Metal fiber. Functionally with [ although there is however discoloration of the C
It has equipped that there is no futility between a Gas tank and a carburetor.
There is no effect of filtration once [, such as a clog of a carburetor, ] by use about a Metal fiber.
Functionally with [ although there is however discoloration of the Case by a Gasoline ] no problem!
View detail
Since RF900 of a bride is out of condition, the Tank rusted a little and rust had accumulated in the carburetor, it equipped with the Filter. Since it is glass, inside may be legible. Since the small neodymium magnet was put into inside by itse
Since RF900 of a bride is out of condition, the Tank rusted a little and rust had accumulated in the carburetor, it equipped with the Filter.
Since it is
glass, inside may be legible.
Since the small neodymium magnet was put into inside by itself if it may be allowed to wish so much although it was good to have entered a magneto, he has no problem.
View detail
An order is placed without often investigating, and it is surprised to see the actual thing. Since it is quite large to the MONKEY, it is cautious of it. Although it can say also to what [ ], let's investigate in advance and grasp a Size.
An order is placed without often investigating, and it is surprised to see the actual thing.
Since it is quite large to the
MONKEY, it is cautious of it.
Although it can say also to what [
], let's investigate in advance and grasp a Size.
View detail
[ -- the Webike Monitor ] -- vomit -- vomit -- although purchased in the measure against a Gasoline leak at the time of a fall with a Course, isn't a Hose hard and isn't a position unsatisfactorily stabilized? After equipping, the leak from a G
[ -- the Webike Monitor ]
-- vomit -- vomit -- although purchased in the measure against a Gasoline leak at the time of a fall with a Course, isn't a Hose hard and isn't a position unsatisfactorily stabilized?
After equipping, the leak from a Gasoline cap was lost, but it is an uncontained leak from a carburetor instead.
.
.
View detail
It is expectation in the thing containing a Metal fiber at the engine performance. I feel that it is likely to work firmly.
It is expectation in the thing containing a Metal fiber at the engine performance.
I feel that it is likely to work firmly.
View detail