Reviews
Used for CRF250L
We used it to fasten X.A.M's Driven Sprocket.
The OEM is M10Bolt, so an M8 conversion Spacer is required to use this one.
The OEM tightening torque is 50 N.m, but when I tried to tighten it with the same torque, it seemed to lick, so I tightened it with a little less torque.
I wonder if you could write the stipulation Torque in the Package.
View detail
DRCRear sprocketBolt nut
Bolt nut for the new Rear sprocket.
It is a dedicated product and fits well.
Since it is a component that can easily come off, inspection before driving is a Large cut.
View detail
Fits: KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP, KAWASAKI GPz400F/F2, KAWASAKI Z400GP, KAWASAKI GPz400F/F2
good-looking
I like the texture.
Nut was also replaced along with sporoke konkan.
View detail
I can't start without it
This is essential when installing an external disc such as PCX on a car model that uses M6 Bolt such as Grom, MONKEY125, CROSS CUB, etc. However, the price is a little bit expensive. View detail
Quantity:1 Set of 6pcs.
Quantity:I purchased 1 Set of 6pcs. and thought the price was normal. View detail
new setup,great look,cheap fuse
Great sprocket bolt kit! The finish is slightly mat than OEM which looks awesome when paired with a new aftermarket sprocket.Great set of fasteners for replacing the stock ones. They are a little longer and the allen head used is a few sizes larger (doesn't round as easily) than the stock ones did however have to tighten them again after my first ride. After that they have stayed tight. I'm glad i bought these as they work great. Much easier to tighten without being worried about stripping the things.webike too fast,Because it is packaged very well, it is subjected to extra inspection at customs.But the shipping fee is high. View detail
Fits: KAWASAKI Z400FX/Z400J, KAWASAKI Z400FX/Z400J, KAWASAKI Z550, KAWASAKI Z550, KAWASAKI Z400FX/Z400J
For Sprocket
Nut so there's nothing special to write about.
The product was satisfactory with no Wound.
View detail
Fits: HONDA XR100 Motard, HONDA XR50 Motard, HONDA XR100 Motard, HONDA XR50 Motard
NSR50 being assembled
Used to install rear sprocket on NSR50. View detail
Not required for all DRCSprocket
I got a DRC Sprocket separately and mistakenly thought this Bolt with Taper was a must and bought it. View detail
Good valued sprocket bolt kit
Sprocket bolts I feel go highly underrated. In fact I feel like wheels and wheel parts in general do...until crap loosens up and your hub blows apart. These sprocket bolts don't come loose on their own but can be pulled off intentionally without a problem..This is my second set i use them because of good price quality is top notch. Made in Netherlands very strong fit is good stay looking new long time plus flanged lock nuts dont back off.Yes i would recommend these to anyone for strength durability & price. The threads on the screws should be about two threads longer to ensure full engagement. I added medium blue loc-title on the end of the screws since the screws had no loc-time until a few threads in. Three of the spokes get in the way of my 12 mm closed end ratcheting wrench so I had to use the open end: not the best. I hope there is a thinner wrench out there somewhere to fit the tight spots. Hope this review was helpful. View detail
It's light!
Light, light, light! I am self-satisfied. View detail
Fits: KAWASAKI ZXR400 R 89 H2, KAWASAKI ZXR400 89 J2
Ninjah2
It was very good. It looks great now. View detail
Fits: YAMAHA YZF-R1M, YAMAHA YZF-R1
While on the subject of Sprocket exchange
While replacing the sprocket, the nut was changed to a Beta titanium lock nut.
We chose the same brown gold color because the Sprocket is goldish and the Front DiscBolt is brown gold to match the floater's Kashima Coat.
An O-ring is embedded at the rear end of the nut to prevent loosening, and it seems that the nut can be reused many times by replacing the O-ring.
The coloring is Brown gold, Moto Salon Oka's original color, which is very beautiful, but looking back at the image, it may have been a bit garish for the color of the Sprocket.
The price is quite expensive for a titanium nutSingle Body, but it is made of Beta titanium, is highly accurate, turns smoothly, and is light enough to worry about.
When I first bought Titaniumium Bolt and Nut, I was concerned about their strength because they were too light, although not as light as aluminum.
The weight of a single nut may not be significant, but since the Chain, Sprocket, etc. have all been changed to be lighter this time, the weight of what is known as the lower part of the Spring should be reduced considerably.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZEPHYR 750, KAWASAKI ZEPHYR 1100, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI ZRX1200 DAEG, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z800, KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI Ninja1000, KAWASAKI Ninja650, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja400
One point
Since you've switched to the more expensive Chain, you might as well splurge a little on Titanium for your Nut!
If it's just Silver, it's Steel and Kawa RAN!
Give me a little more βTitanium Nut and Anodize!
The price was good... I don't regret it.
View detail
I'm sorry, but please change your delivery address. I registered as a member at the new address.
I'm sorry, but please deliver it to the new address.
Your membership registration has already been changed.
View detail
Color play.
It's hard to see, but it's perfect for playing with colors. It's very small, but it's made of titanium, so it's lightweight. View detail
It felt easy to lick.
It is possible that the accuracy of the tools you are using is poor.
I found it easy to lick. I don't think I would purchase again.
View detail
No problem!
When I replaced the Sprocket, one of the Screws came off after a while, so I bought this product, which has the same DRC as the Sprocket.
So far, I have used it without any problems.
View detail
Cost-effectiveness is good enough
The price was low... and the equipment was good enough! The tightness was good. View detail
I use it because it is an exclusive product.
I purchased this as an update to Bolt after changing the number of pins for several times.
Since the recommendation is just to replace it with a new one, we purchased a dedicated product since it is also an important component.
I think reliability is more important than performance for this type of product, so I thought I should spend the cost for my own safety.
View detail