Reviews
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
cheap
Cheap and this quality can be scratched with confidence.
It hangs a Y-shaped Hook and gets scratched, but that's the way it was in the first place.
I think cheap is justice, and this price is reasonable for MORIWAKI.
View detail
Fits: KTM 950SUPERMOTO, KTM 990ADVENTURE, KTM 990SUPER DUKE R, KTM 990SUPER DUKE, KTM 990 SUPERMOTO, KTM 690SUPERMOTO, KTM 690SMC R, KTM 690SMC, KTM 690DUKE, KTM 690ENDURO, KTM 200DUKE, KTM 390DUKE
I saw that it was for car models only.
You can't use it, so all you can do is complain! With rising prices, Cup noodles are also increasing in price.
What a waste! I'm going to eat an ear of bread for a while!
View detail
It wasn't necessary.
Purchased to raise the rear wheel when cleaning the chain, etc., as there is only a side stand.
I attached it, but I only needed the L-Type Adapter that came with the Rear stand.
Well, it looks good, and I'll leave it on.
View detail
Fits: SUZUKI GSX-S150, SUZUKI GSX-R150, SUZUKI GSX-S1000, SUZUKI SV650 ABS, SUZUKI GSX-8S, DUCATI 999, DUCATI 999S, KAWASAKI ZX-10R, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI KATANA, SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX1300R HAYABUSA, SUZUKI SV650X, SUZUKI GSR750
Texture Psycho
Purchased for use with Maintenance Stand.
I chose YOSHIMURA because I thought it would be the best choice among various manufacturers.
Installation is not particularly difficult, as all that is required is to tighten the Bolt.
The colored aluminum part is fixed and the black resin part rotates round and round, so it seems to be less prone to scratches, and it may be lighter because it reduces resistance when the STAND is hung or removed.
I am not sure about the durability of the product yet, but as it stands now, I am satisfied with the Large change.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Z250, KAWASAKI Z400, SUZUKI GSX250R, KAWASAKI Ninja650, KAWASAKI Z650RS, SUZUKI V-Strom250, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GSX250R, KAWASAKI Ninja250, KAWASAKI Ninja400
casually YOSHIMURA
I wanted Red but it was out of stock so I bought Gold.
It could have been good with a casual luxury feel.
The price is...
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI NINJA1000 (Z1000SX), BMW S1000RR, DUCATI , HONDA , KAWASAKI Z800, SUZUKI , TRIUMPH DAYTONA675, BMW S1000RR
It protected the body of the car.
It protected the body of the car when it was standing on the ground.
Slider took care of the damage and I repurchased.
View detail
![Swingarm Spool (Stand Hook)[Cotton Reels]](https://img.webike-cdn.net/catalogue/images/50737/3235413_1_TS.jpg)
Fits: APRILIA RSV4 RF, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono, APRILIA Tuono, APRILIA Tuono, APRILIA Tuono, APRILIA Tuono, APRILIA TUONO V4 1100 Factory, APRILIA TUONO V4 1100 Factory, APRILIA TUONO V4 1100 Factory, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR
Is M6 still thin?
Installation 3 min.
If only this would make Maintenance easier!
This is the second time I've bought one of these, or maybe the last time, and one of them got bent.
I put it back and it broke.
Is M6 still too thin?
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Prevention of damage in the event of a fall
Bobbin type was replaced with Plate type because the Swing Arm was damaged when it tipped over.
Plate is thick and rigid, but a little heavy. (about 120~30g) I wish it was under Spring so I could have had it butchered or something.
It also serves as a Sprocket guard, but the distance is too far away to have much of a Guard feel.
The feel is more stable than Bobbin type.
View detail
Genuine Evotech stand hooks, bobbins
A good friend was in the market for some good quality frame and swing arm protection but also wanted a nice set of stand hooks (we call them bobbins or cotton reelshere in the UK). The good thing about most of these stand hooks is that they also double as protectors too. These were the same. They also wanted Evotech to match their existing rear axle sliders. I found the parts via Evotech website. To be honest, I was unsure if Webike would stock this brand but low and behold, they were on here. These do fit a lot of other Yamaha bikes so are pretty popular. The price was good value and around the same as I could source locally. I did however want the rear axle protectors too but I could not source these locally as they were out of stock. Webike actually had them in stock so it was a no brainer to order all the parts from the same place. EMS is the courier I chose for this order. It is fast becoming my go to courier from Japan. It beats Fedex in both cost and by how fast the orders are delivered. This order took around 5 days if I remember correctly. All the parts were well packaged and any space left in the box was filled wiht bubble wrap and air pockets. the outer box was also sealed with tape so nothing, not even the gaskets could escape or fall out during transit. The stand hooks are really good quality and do last a long time. They are even exceptionally good if you do have a small off, the plastic part does its job and stops the axle from hitting the floor and causing damage. These were fitted really quickly as they are just bolt on. Very happy customer and thank you Webike for stock great parts. View detail
rigid
I was worried about whether there would be any deflection since it is fairly meatless, but no problem.
More stable and easier to hang than Bobbin type.
It is also good to not have to worry about pushing and damaging the Swing Arm in the event of a fall.
View detail
PetitCustom
I considered AELLA products, but I didn't like the protruding ones, so I decided to go with this one. The operation was good without damaging the boots. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S150, SUZUKI GSX-R150, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI KATANA, SUZUKI GSX-R1000, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI SV650, SUZUKI V-Strom250, SUZUKI SV650X ABS, SUZUKI SV650 ABS, SUZUKI SV650X, KAWASAKI ZX-10R, DUCATI 999, DUCATI 999S, SUZUKI GSX-8S, SUZUKI GSX-S1000GT
It is a 22 HAYABUSA, but it is narrow.
The quality of the product itself is good, and unlike other Hooks, the black part inside turns, so it is hard to scratch when raising it with the V-shaped Hook. However, the distance between the Swing Arm and the Rear Stand is so close that the tip of the V-shaped Hook on the Rear Stand might hit the Swing Arm if it were left as is, so I put a collar between the Swing Arm and the Rear Stand (2nd photo). The attached Stainless Color Bolt is thinner than the Universal Product Bolt, so if I use the Universal Product Bolt, the head will stick out. Therefore, I will give it 3 stars because it is not possible to combine a long bolt with a thicker color. View detail
Simple and good.
I was looking for something simple, but I found one with a large manufacturer's logo, which did not fit my taste.
I purchased the Titaniumium color and I like it because it is simple.
View detail
A-TECH Earplugs
At a quick glance, the texture is no different from TRI*ST*R and this Slider.
The packaging is insanely kind, protecting the Screw part with Tape to prevent Garbage, etc. from sticking to it.
StickerQuantity as a bonus:1 Set of 2pc.
Just in time for earplugs, man! (This product is HookSlider. Good kids don't copy it!)
View detail
Purchased for ApriliaRS660
I bought this for ApriliaRS660, but when I ordered it in M6Size, the boss was very Small and I stopped installing it. Now I am installing the one I bought separately. The quality and color of the product was very good, but I was disappointed. View detail
Fits: KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja ZX-25R, SUZUKI GSX250R, KAWASAKI Z650RS, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, SUZUKI GSX250R, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI V-Strom250
great accessory
The original factory of the motorcycle is not equipped with a parking device. If you need to use the rear wheel parking rack, you need this YOSHIMURA rear rocker column ball set. The workmanship is very delicate. It combines cutting aluminum alloy and resin bushing , The part of the resin bush can be rotated, it can be parked smoothly, and at the same time, it can prevent scratches on the contact surface. The original lightweight design reduces the weight and also has a handsome appearance. -------------------------------------------------- -------- The original motorcycle is not equipped with a parking device. If the rear wheel parking frame needs to be used, this Yoshimura rear rocker column car group is needed. The workmanship is very delicate. tree can be rotated, which can be placed steadily, and at the same time to prevent scratches from the contact surface. The original lightweight design is reduced, which reduces the weight and has a very handsome appearance. Powered by Google Translator View detail
J-TripOEM Product
It hangs well, and the compatibility with J Trip's STAND is as OEM as you would expect. The extension collar reduces the risk of scratching the swing arm. It may not be good for those who wear it all the time because it looks longer, but we chose this one because we remove it every time we use it. The color will fall off if you are not careful when removing it, which is a slight minus point. View detail
Stand hook slider
The gold and plastic parts are not crimped on one side, so it turns round and round, but it is still usable. View detail
Buy for Maintenance
I replaced the Swing Arm with a Swing Arm that allows for the attachment of a Stand Hook, so I installed it.:I was considering DURACON, but it was too expensive.:I purchased Aluminum.
The installation itself does not seem to be difficult, but the Bolt included in the kit was 1.25 pitch and did not fit, so we had to purchase a separate Bolt.
We recommend this product because of its low price, despite being a product of a well-known manufacturer.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS
no problem
I used it on my Z900RS.
I had previously used an anodized swing arm hook on another motorcycle, but it originally interfered with the Jack, so it was scraped off and the substrate showed.
The swing arm hooks here are made of a plastic-like material, so the color did not peel off even after hanging jacks.
I was also satisfied that it was long enough to not interfere with the Swing Arm.
View detail