Reviews
Fits: SUZUKI GSR250, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI GLADIUS650400, SUZUKI GSX-S1000F, SUZUKI SV650, SUZUKI V-STROAM250, SUZUKI BURGMAN400, SUZUKI V-STROAM, SUZUKI GSX-S1000S, SUZUKI GSX-S1000, SUZUKI GSX250R, SUZUKI GSX-S1000GT, SUZUKI V-STROAM1050, SUZUKI V-STROAM1050XT, SUZUKI V-STROAM1050DE, SUZUKI V-STROAM650, SUZUKI V-STROAM650XT
First time is tough.
If you are replacing the Bar End for the first time, be careful.
I guess it depends on the type of car, but in my case (2023 KATANA),
First, the Bolt that is included will not be used. Also, most of the included parts will not be used.
I use the OEM Bolt, but sadly it does not fit this Bar End.
I think it is a lack of understanding of the structure of the Bar End itself, but at first I used a part like the Adjuster that came with the Bar End without understanding it, and the Bar End did not come off.
We ended up taking it to a Motorcycle shop and decided to remove this Bar End.
Since the product photo does not show the attached parts, I will buy the actual product at the Shop in the future, even if it is a little more expensive, instead of using Webig.
View detail
Silver insert color is nice.
Installed in conjunction with Grip replacement.
Since the motorcycle has many plating parts on the body, silver was selected as an accent to the handlebar's black.
The color is good and the Silver looks good.
We considered heavier products, but chose this product with less thickness considering the width when parking.
View detail
Satisfied
I am satisfied with the reduced vibration. I think that the operating feel depends on the handlebar, so it is different for each user. View detail
![[Highsider] Bar End Mirror Adapter for YAMAHA 1 Vehicle](https://img.webike-cdn.net/catalogue/images/47841/96702_01_TS.jpg)
Fits: YAMAHA , YAMAHA MT-07
Quality is good, but may be difficult to match.
I bought this to replace the bar end mirror on my xsr900, and although the gap at the bar end is wider than the OEM product, I had no choice but to install their bar end mirror.
That is the only thing that is a little unsatisfactory. Other than that, the construction is satisfactory.
View detail
As expected of a DAYTONA product, Repair Parts are substantial.
The Daytona MultiBar mount end caps that came with the car from the time of delivery were missing from the beginning, and although they were painted, they were slightly rusted inside and I had been thinking for some time that they did not look good.
While buying another product on Webike. Speaking of which..." I remembered that I was looking for an end cap and found this product.
I bought it without any preliminary research and it was EXACTLY as shown in the picture.
MultiBar mounts made by DAYTONA would be mostly compatible.
There were two steps, the first step went in easily, and the second step was a tight Size so that it would not slip out.
I don't think it will come off so easily, because it is so tight that if you push it in with your bare hands with a lot of force, it will go in with a snap.
Thanks to the Repair Parts setup, we didn't have to bother replacing it, and we are happy with the much improved look.
As a side note, since the cap is for a standard round pipe, it can also be used as an end cap for furniture, etc.
View detail
Fits: KAWASAKI GPZ1100, KAWASAKI GPZ900R, KAWASAKI NINJA250R, KAWASAKI NINJA400R, KAWASAKI NINJA650, KAWASAKI NINJA650R, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZX-7R, KAWASAKI ZX-9R, KAWASAKI ZX14R, KAWASAKI ZZR1100, KAWASAKI ZZR1200, KAWASAKI ZZR1400
There is an effect that can be seen in the "Hadrill
Vibrations at highway speeds are noticeably reduced, at 80km I don't feel it at all, at 90km it's just a little bit bothersome. Motorcycle is the New Model Eliminator. View detail
Fits: KTM RC250, KTM RC390, KTM DUKE250, KTM DUKE390, YAMAHA MT-25, YAMAHA MT-03, YAMAHA NMAX, YAMAHA YZF-R3, YAMAHA YZF-R25
Effective in vibration reduction
It is a Single Body and quite heavy. It is certainly effective in reducing vibration. View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja650, Others , HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VFR800, HONDA VTR250, HONDA RVF400, HONDA VFR750R, HONDA NC700X, HONDA NC750, HONDA GB350S, HONDA NC700S, HONDA CBR1000RR-R SP, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR650R, HONDA CB650F, HONDA CB650R
It is not a pure Black.
The color looks a little brownish rather than black in the right light. It is super easy to install. I think you can install it by yourself, but if you don't have the knowledge to remove the OEM bar end, you might want to ask a shop to do it for you. The included Inner Weight is a few Grams lighter than the OEM. View detail
![Aluminum Billet Handlebar End [GrooveType]](https://img.webike-cdn.net/catalogue/images/127179/BEGV_TS.jpg)
Fits: SUZUKI DL1000 V-STROM250SX
Car-specific installation kit?
As a result of the installation, there is a 7mm gap (see photo) at the Knuckle guard mounting point, and it rattles when driving.
This is happening because the thickness of the Color Guide for the car-specific installation kit is 12mm and Large!
In the end, to eliminate the 7mm gap, we purchased a K-CON M6 18Φ 5mm thick aluminum spacer and installed it to eliminate the gap.
In addition, the DL1000 V-STROMSX bar end attachment part is described in the instruction manual as a type that compresses the rubber between the bolt and the handlebar and crimps it to the handlebar, even though it is a type with a screw cut on the end of the handlebar (the parts list does not show such a construction). (Even the Parts List does not show such a structure.)
Thinking that perhaps a mounting kit for another model was mistakenly included, I inquired at the ManufacturerSite, but received no response (I was disappointed because I had been using the Manufacturer's Lever until now).
The quality and texture of the product are highly evaluated, but the mounting kit is not good enough.
Dear Webike.
Not because it was a SPECIAL PRICE.
View detail
Fits: YAMAHA FJR1300, YAMAHA FZ8, YAMAHA YZF-R1, YAMAHA YZF-R6
The texture is lovely.
Used in 2008 YZr-R1.
Simultaneous replacement of Grip and Bar End.
If you install it as it is, there is a large gap between the end of the grip and the end of the bar, which is not a good parenthesis. Well, there are many motor cycles like that.
It is not enough to just attach a pontoon.
This kind of thing can be done neatly by modifying and adjusting it to suit the motorcycle.
The spacer was kindly included in the kit, so we shaved off about 4mm of the gap and adjusted it to 1mm on the Throttle side.
This is a consideration that the manufacturer has gone to the trouble of creating a high quality product, so it should have a good parenthesis.
View detail
A bit pricey.
With bar ends made entirely of gold, the basic rule is to replace the bar end when it falls over, but in this case, only the resin part can be replaced, so there is no need to buy a new one if it is just a standing bump.
However, the replacement of the resin part is a bit Large strange.
View detail
Lightweight bar ends from KIJIMA
Lightweight bar ends from KIJIMA, ideal to save some weight while still maintaining some vibration damping efects. Can be use on both the stock steel handlebars or aftermarket aluminium ones, as it cames with both adapters type and the Allen tool also. Overall a good quality/price product. View detail
Fits: KAWASAKI Z900RS cafe, KAWASAKI Z900RS, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR KRT EDITION
Vibration? It might be better.
[How is it used?
Touring use from mountain to city driving
Was the one you received as per Image?
Street Image
Was the installation difficult?
The work is easy. But I don't know which way to put the groove on the outside or which way to put it in!
How was your experience with it?
I feel fine vibration....like Large vibration to Small vibration?
[Included Parts:were they on?
None
[Was there anything that disappointed you?
The OEM Screw is Black, and this Screw is Silver color, which is a bit cheap w
It's cheap, that's what it is.
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX1300R
I'm glad I went with Gold.
I used to use middle weight, but the numbness in my hands did not decrease so much, so I decided to use heavy weight this time. I hope you will experience some vibration this time! View detail
Fits: HONDA FORZA, HONDA NC700S, HONDA CBR650F, HONDA CBR1000RR, HONDA CB650F, HONDA CB400SF, HONDA CB400SB, HONDA NC750S, HONDA NM-4, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, SUZUKI GSR750, SUZUKI GSX1300R, SUZUKI GSX1400, HONDA HORNET900, HONDA GROM, HONDA HORNET600, HONDA FORZA
It went well.
I knew it was Honda and For SUZUKI, but I bought it thinking it would come on if I changed Washer, etc.
The chrome black color looks great and the weight is expected to reduce vibration.
View detail
Fits: KAWASAKI GPZ1100, KAWASAKI GPZ900R, KAWASAKI NINJA250R, KAWASAKI NINJA400R, KAWASAKI NINJA650, KAWASAKI NINJA650R, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZX-7R, KAWASAKI ZX-9R, KAWASAKI ZX14R, KAWASAKI ZZR1100, KAWASAKI ZZR1200, KAWASAKI ZZR1400
For NINJA400R
Replaced from NINJA400R OEMBar End.
It is considerably heavier than OEM, so I expect it to reduce vibration when touring or driving at high speeds:??
View detail
Fits: Others , SUZUKI V STROM 650
Easy to install
Model:YZF-R25
I was about to buy Repair/Option Parts, but changed my order because Body was on sale for less. I have used it before to reduce vibration on a single cylinder and I am using it on my R25. Recently, I have been trying to increase or decrease the weight because I am concerned about the vibration, and when I made it heavier than 350g, my whole arm went numb, so now I am going to try 300g.
View detail
Fits: BMW F900R, BMW R 1250 R, BMW R1200R, BMW R1250R, BMW S1000 XR, BMW S1000R
Personally, I'd say.
It is smaller than the OEM size, so we do not recommend it to those who do not like it. View detail
Fits: HONDA CB400SF, HONDA CB400SF VTEC, HONDA CB400SUPER BOLDOR, HONDA CB400SF VTEC Revo, HONDA CB400SUPER BOLDOR
I was planning to tour at high speed, so I was hoping for a Handlebar shake effect.
I purchased this product because it was said to be compatible with my car model and year, but the included screws were too short and could not be installed.
Furthermore, upon closer inspection, there were also scratches.
It is a pity that the price was so high.
View detail
Super lightweight bar ends!
If you want to reduce your bike's weight then this bar ends from CF POSH are the best! They weight just an amazing 17 grams for the pair! The quality and price are also very good. Definitely a good buy! View detail