Reviews
I now look forward to driving at night.
The instruction manual says to install the power wire to 12V with Ignition ON, but I wanted it to work at Small or higher, so I wired it to the Small + wire. I was relieved to see that the indicator was a simple voltmeter, and since I was testing without running the engine, it was a sign of insufficient voltage. View detail
I now look forward to driving at night.
Installation was very easy. The instruction manual says to connect the power wire to the 12V output with Ignition ON, but I wanted the unit to work on Small or larger, so I connected the power wire to the + wire of Small.
During the operation check, no matter which of the three types of Controller Indicator settings were made, the indicator would turn red after a short period of time. I was mistaken and found that it was set properly.
View detail
Parenthesis is good, but it's broken.
It looks good and makes the MONKEY look one size larger.
After a year and a half, it suddenly went into high flasher status, even after re-configuring the settings...
Removed. Tarnished.
View detail
Visibility UP!
Installed on VIRAGO250.
The purpose of the installation is to increase visibility at night.
I hope it will make it a little easier to get a sense of distance to oncoming cars waiting for a Right turn, etc.
First, for MONKEY (Universal) The Bullet Terminal with wiring treatment is a thin type, so it is necessary to replace it with a thicker Bullet Terminal for Yamaha cars. Please be careful!
In my case, I had surplus power after changing the headlight to LED, so I wired this product by splitting the +- from the H4 Extension Harness. This way, I can return to NORMAL at any time, and I can use it for other cars as well.
However, because of this, the Blinker position is only activated at Low beam.
When the light is turned on, it does not turn on and off immediately, but rather flutters on and off, giving it a luxurious feel.
The brightness is good at 50% according to the Instruction Manual.
Of course, 100% brightness is more noticeable, but since our Blinker Valve is 21W, we were concerned about Lens melting and power shortage, so we decided on this brightness.
When the beam is set to high, the blinker position disappears, but the blinker is still on, so there is no problem.
I think it is recommendation for those who drive a lot at night.
View detail
Up presence!
The blinker is a very good way to get the best out of your blinker, but it's not as dark as I thought it would be. BlinkerWiring is also available, so you need to be careful not to connect the wrong color. View detail
Honda-like Blinker position
What do you think of Honda cars? The Blinker position is what I personally think of in
We thought it would be a useful piece of equipment to increase visibility, so we installed this one, which is a CT125-specific product.
Three lighting patterns are available, but HondaOEM-like Pattern 2 (when blinking, the opposite side is dimmed) was selected.
I am satisfied that the Blinker position has improved visibility, as I had hoped.
Slow dimming action (gradual dimming between 2 or 3 flashes)
When BlinkerOFF is turned on, both lights turn off and on again.
I was a little concerned about the behavior of the above two points.
The instruction manual is easy to understand, and it does not require processing.
View detail
OPMID Doctor Lamp Blinker Position Kit
It is made by Opmid. It is not easy to install, but it comes with instructions. I think that there is no problem if it installs while watching YouTube if it is difficult to understand. The impression that I used it was that it was a very safety effective thing to make the visibility from the pedestrian from the oncoming car increase more than I thought, and to recognize the body of the small MONKEY125. It is a cost effective product. View detail
"Made In JAPN I can't be proud of Camouflage…
[How is it used?
"The MONKEY125 is a special machine for short touring on holidays when the weather is good. Equipped with the
Was the one you received as per Image?
compared with expectations "A well-crafted product. It was, so maybe it's above Image.
Was the installation difficult?
mostly As per the Instruction Manual. But how to pass Wiring, etc. "You need a certain amount of experience tinkering with motorcycles. There are some places that are
How was your experience with it?
"The forward Both SidesBlinker lamp just becomes a Position lamp. However, I liked it very much because it increased the presence of Motorcycle more than I imagined.
[Included Parts:were they on?
There are no missing parts, and the Instruction Manual is monoblack, but "*Color Connector to *Color Terminal… We are more than just a Japanese Custom partsManufacturer. "Kindness. This is the impression.
[Was there anything that disappointed you?
The productPackage was solid and I was not disappointed in any way.
Other items that would be helpful
Point and hang of installation
In addition to what is written in the Instruction Manual "Fuel Tank's RearMount Bolt. If you take off the tank and float the tank about 2-3cm with cured wood pieces etc., it will be easier to pass the wiring.
[Availability and clarity of the Instruction Manual
As mentioned above, a good Instruction Manual is included with the package.
[Notes]
When you run Wiring or fit it in WiringBoots. "No pressure. To avoid damaging the NORMALWiring. "Careful. Let's work on the
[ITEMS TO BUY TOGETHER
I had one myself. "Through Emon's Wiring. It's a good way to work if you have Using a needle gold or other NORMALWiring. Avoid scratching the Electric Wiring, because even a small scratch can cause unexpected malfunction.
[Opinions and requests to Manufacturer
Overall "Good product" I think so. Especially "Instruction Manual" The quality of the service is very good and the price is very reasonable.
if possible "This is how the product's Defferential Gears are configured. It would be perfect if there was a guide such as
I look forward to more of your products.
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX125, YAMAHA NMAX125, YAMAHA MAJESTY S, YAMAHA MAJESTY S, YAMAHA BW'S125, YAMAHA CYGNUS X, YAMAHA BW'S125, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA Tricity155, YAMAHA BirdCity155, YAMAHA BirdCity125, YAMAHA BirdCity125
Installed on MAJESTYS SG52J
This time, I added this product which is multifunctional and can be installed by Couplet-on! 。
MAJESTYS SG52J is a 2PConnector similar to CYGNUS 。 The 3PConnector in the manual seems to be a description of SG28J 。
MAJESTYS can be installed with this kit if you use the included connector. 。
Installation was easy according to the instructions. 。
Easy to use and very good. 。 It is a normal valve, but brightness 5 was bright enough. 。 The operation can also be changed according to your preference and security standards. 。
I really like the control of the gradual brightening of the blinker as it changes to Position.
View detail
You look solid.
First of all, when you see the item, it looks solid.
If you are a motorcycle enthusiast, you can easily install this product.
I think it would be a good first thing for a beginner to play with.
It works just fine for what it's supposed to do! Durability wise, I'd say it's probably Large sturdy, but I'll post back if there are any glitches!
View detail