Reviews
Fits: YAMAHA YZ125, YAMAHA WR250F, YAMAHA TZR250R, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA SY250F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA XT250X, YAMAHA tricker, YAMAHA SEROW250, YAMAHA SRX400, YAMAHA SRX600, YAMAHA TT250R, YAMAHA YZ125X
It is Recommendation
Clutch operation has been lightened. The position of the half-clutch is easy to find and convenient for long tours without tiring. View detail
Fits: HONDA CRF250M, HONDA REBELRebel250, HONDA CB300R, HONDA Rebel300, HONDA CRF250RALLY, HONDA CBR250R, HONDA CRF250L, HONDA CB250F, HONDA CB250R
Nuts, screws and washers for clutch reinforcement springs
It's really expensive. Just a nut, screw and washer cost hundreds of dollars. Maybe it's the cost of flattening the mold, but the 305CC SP Wuchuan cylinder expansion kit has been replaced, and it must be strengthened. There are 5 nuts, 5 screws and 10 washers in total, each screw is used with 1 nut and 2 washers. At present, I rarely ride, and I look forward to the feedback after the long-distance test. Although it is invisible, it is very beautiful red. Really expensive, just a nut screw and gasket, it is sold to hundreds of prices, perhaps the cost of flattening the mold, but has replaced the 305CC SP Takegawa expansion kit, must be strengthened. A total of 5 nuts, 5 screws, 10 gaskets, each screw with 1 nut and 2 gaskets to use. At present rarely ride, looking forward to the feedback after the long-distance test, although installed invisible, but beautiful red. View detail
Fits: YAMAHA YZ125, YAMAHA WR250F, YAMAHA TZR250R, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA SY250F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA XT250X, YAMAHA tricker, YAMAHA SEROW250, YAMAHA SRX400, YAMAHA SRX600, YAMAHA TT250R, YAMAHA YZ125X
I've changed so much!
To be honest, I didn't put much faith in these custom parts, but I found the product to be very effective. First of all, it made it easier to drive willy. I used to have a hard time getting the front up, and I had a hard time with the log sections in the course. The other thing is that I now feel a greater sense of urgency in shutting off the power by operating the clutch. I can feel that the power is being transmitted firmly now, and that it is being cut off now. I don't know if this is a plus for racing, but I think it's a big plus to be able to see how the machine behaves when you operate it. This is a very small part, but it works very well. View detail
Fits: YAMAHA TW200, YAMAHA TW225, YAMAHA SEROW225
Clutch connects comfortably.
[How is it used?
Installed on SEROW225 which is used for forest road play.
Recently, I had a strange feeling about the connection of the clutch and decided to replace the clutch. If you want to replace it, you can do it while
I also bought the Retainer Kit, which I had been thinking about installing.
Was the one you received as per Image?
It comes in a Small Saisai Small bag. Looks like Blue with Anodized color? and
WasherSticker for Bolt and adjustment is enclosed.
Was the installation difficult?
Installation of the Retainer Kit is easy, just replace the Bolt with Collar.
You can use the Washer for adjustment as you like. This time, the main purpose is to change the clutch.
That one took more effort.
How was your experience with it?
At first I thought, "Will this color make a difference? I thought it would make a difference, but the clutch is much sharper and the connection is better.
I can now see the position of the half-cluster, which had been somewhat blurred.
[Included Parts:were they on?
Collar Bolt and WasherSticker for adjustment are enclosed in the package.
[Was there anything that disappointed you?
There was no Instruction Manual and the use of the Washer was unknown.
Net shows how to use the Washer for adjustment.
I referred to it because it is described.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It's a lot of work to just install a retainer kit.
It might be a good idea to install it while replacing the Clutch.
View detail
Fits: YAMAHA TW200, YAMAHA TW225, YAMAHA SEROW225
The way Clutch is connected has changed dramatically.
Used for SEROW225.
It changes the way Clutch is connected.
It's like the vague connection is connected to Span.
The number of Washer was set to two at first, but it is not possible to set it to Quantity.:1pc. is now better.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA YZ450F, YAMAHA RZ350R, YAMAHA SR400, YAMAHA SR500, YAMAHA WR450F, YAMAHA XTZ-750XTZ750 SUPERTENERE, YAMAHA YZ250, YAMAHA YZ250X
Kobo Kitamura Clutch RetainerKit KITA-Y12-01
[How is it used?
Was the one you received as per Image?
The product and Quality was exactly what I expected.
Was the installation difficult?
It's not difficult if you have a Kill. If you follow the Manual for each of those vehicles, you'll be Large strong.
How was your experience with it?
It came with 12 Shims, but I installed them without Shims this time. Clutch operation became a little heavier, but not too much. The distance between the lever and the clutch is obviously shortened. In other words, it is possible to meet with short stroke. The symptom of slipping at high rpm is also eased and it became like Reinforced Clutch.
[Included Parts:were they on?
12 Shims for adjustment, with 3 levels of adjustment
[Was there anything that disappointed you?
None at all
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA , HONDA CRF230F, HONDA FTR(223), HONDA NIGHTHAWK 250, HONDA REBEL, HONDA SL230, HONDA TL125, HONDA TLR200, HONDA XL125R, HONDA XL200R, HONDA XR230
Clutch's FeeRing is changing!
[How is it used?
I decided to buy this product when I heard that this product would be released from Kobo Kitamura with the same Timing as the change to Reinforced Clutch for xr230.
Was the one you received as per Image?
OEM Parts are processed. The appearance is not so different from OEM Parts.
Was the installation difficult?
The timing is the same as changing the clutch, so it cancels out the need to open the crankcase, but it is a bit of a hassle.
Gasket, etc., must be prepared in advance and must be installed with the specified torque or it will be damaged.
How was your experience with it?
I used to grip the lever to change the Clutch, but after installing this, the Clutch connects smoothly thanks to the Spring being properly engaged.
With the Reinforced Clutch on it, it didn't make it any lighter, but it did take some of the strain off my grip.
Even if you roughly release the lever, it will connect quickly and easily. It became more fun to connect.
[Included Parts:were they on?
Washer is included, so it is a form to incorporate if necessary according to the use.
[Was there anything that disappointed you?
Not at all.
I know some people think it's expensive for an OEM, but it's definitely worth it.
This processing technology is a national treasure.
View detail
Fits: YAMAHA YZ125, YAMAHA WR250F, YAMAHA TZR250R, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA SY250F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA XT250X, YAMAHA tricker, YAMAHA SEROW250, YAMAHA SRX400, YAMAHA SRX600, YAMAHA TT250R, YAMAHA YZ125X
I'm feeling better, sir.
[How is it used?
Installed in the family vehicle
Was the one you received as per Image?
No problem.
Was the installation difficult?
I asked the shop to do it for me.
How was your experience with it?
It may have become a little lighter from the beginning of the Clutch grip to the Hankler level. The weight of the Clutch lever has not changed. When I asked the shop to measure the weight of the Clutch lever after assembly, the weight of the full grip did not change. I think it's because of the structure, the sharpness and the initial lightness.
[Included Parts:were they on?
None. I would love to have the instruction manual, or I wouldn't be able to put it on.
[Was there anything that disappointed you?
In my personal experience, it does not feel very light. However, the sharpness has improved.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I'm not sure if this is a good idea or not. Also, the video on the homepage doesn't tell you how many washers there are, so an explanation of the number of washers is a must. I would have ended up without Webig's review. Thank you for your predecessors.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA YZ450F, YAMAHA RZ350R, YAMAHA SR400, YAMAHA SR500, YAMAHA WR450F, YAMAHA XTZ-750XTZ750 SUPERTENERE, YAMAHA YZ250, YAMAHA YZ250X
Clutch drastic change
I was wondering if I could do something about my carburetorSR clutch which is said to be heavy, and found this.
It is MAJOR to put in the clutch spring of the fI car, but because my SR is tuned so much and has more power than NORMAL, I had been hesitant to change the spring because I was worried about the durability.
The number of Washer between Retainer and Spring can adjust the strength of Clutch, and the recommendation is 2 or more. I made it to the number of sheets.
It's not only lighter, but it's also a lot quicker than the OEM clutches. I like the Feeling Ring very much, but it may be a little confusing until you get used to it because it is completely different from the way the OEM Clutch breaks. If the OEM Clutch's Stroke is 10, this one is shorter at about 6. (Of course, the Stroke of the half-craze will also be shorter.)
Clutch work is much better and shift is much better. Also, this may be just my SR, but I can say that the slight vibration from the engine has been reduced. (Because it is Front cowlSpec., the swing of Screen became Small.)
I think it's a really effective Parts for the Gold price!
View detail
Fits: HONDA CRF250M, HONDA REBELRebel250, HONDA CB300R, HONDA Rebel300, HONDA CRF250RALLY, HONDA CBR250R, HONDA CRF250L, HONDA CB250F, HONDA CB250R
The ambiguity of the half-craze disappears.
Used on a '14 MC41 CBR250RSecond Type Model.
This product is designed to improve the stability of the spring by replacing the bolt washer that holds the clutch spring, and to improve the direct feeling of the clutch operation.
Because it is explained in detail in the homepage of Mr. Kitamura, I saw it and understood the theory, and decided to try to buy it.
The goods which arrived are only the mount of the commodity name, Retainer, the dish ScrewWasher, and the Sticker of the store, and the packaging of the feeling that it is a handmade commodity.
Well, it's just a replacement, and people who buy this kind of product don't need the Instruction Manual.
Although it is beautifully anodized, it is not visible once it is installed, but the quality of the product is high.:There is no rattling when it is set, and the quality of the product is high.
Installation is easy, just replace the OEM WasherBolt. (Although it is troublesome to open the Clutch cover …)
Number of Washer to put in Reverse side of Retainer (0 for heavier than OEM, 1 for same etc., 2 for lighter than OEM) It is said that the weight of the Clutch can be adjusted with the "Quantity", but I am not particularly dissatisfied with the weight of the Clutch.:Built in 1pc.
It is easy to understand if you think that the Washer adjusts the pre-road of the Clutch Spring.
The installation itself is easy, but you need to know the basic knowledge of how to tighten it several times on the diagonal.
After building and riding it, I can say that the Clutch definitely has a more Direct feel to it.
The ambiguity of the half-Clutch range at the beginning of the connection and the beginning of the cut is reduced, and it is connected and cut quickly … I think.
It will be a very Race ish Fee Ring.
However, until you get used to it, you may be confused by the changes when starting, but once you get used to it, you will definitely be addicted to its unambiguous Clutch feeling.
However, this direct feeling might become a little stress for the person who uses it for long touring because the feeling that it corrects it to Smooth is lost tolerating even a miscellaneous operation because of the vagueness of OEM.
I was embarrassed to admit that I stalled the engine once when I started the car right after changing it. (Lol)
Also, the original sticker from the workshop that comes with it is adorable! (Lol)
As a general comment, it is certainly effective and has a high level of satisfaction, but the price of 7,000 yen is a bit high;
Considering the labor and hassle of opening the Clutch cover associated with replacing it, it's not exactly cosmetic…
If you want to change the oil or clutch plates while changing the others, you can recommend it.
It's also possible to incorporate Reinforcement Spring together like I did.
If the price was a little more reasonable, it would be easier to get your hands on it;
View detail
Fits: YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA YZ450F, YAMAHA RZ350R, YAMAHA SR400, YAMAHA SR500, YAMAHA WR450F, YAMAHA XTZ-750XTZ750 SUPERTENERE, YAMAHA YZ250, YAMAHA YZ250X
It feels good to hold the Clutch lever ~.
I bought a Clutch spring retainer from Koubou Kitamura.
Yamaha's RZ250R also fits, so I installed it.
When I held the Clutch lever, it was very smooth.
When I dropped the GEAR by one step while driving, the connection softened the Shock.
Cutting and connecting the Clutch is very sharp.
I niggle the Clutch lever for no reason. [Laughs]
View detail
Fits: YAMAHA YZ125, YAMAHA WR250F, YAMAHA TZR250R, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA SY250F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA XT250X, YAMAHA tricker, YAMAHA SEROW250, YAMAHA SRX400, YAMAHA SRX600, YAMAHA TT250R, YAMAHA YZ125X
Clutch Retainer
Was the one you received as per Image? It came in a rather small bag, with no instructions.
Was the installation difficult? I didn't want to tlove it later, so I had a Motorcycle shop replace the Gasket and Oil as well.
How was your experience with it? The clutch is now lighter with the use of two washers, and I think the sharpness and connection is also better.
[Included Parts:were they on? Contents include Clutch Retainer and Bolt×5 Washer×10 No instructions.
[Was there anything that disappointed you? None in particular.
[Notes] If you have the tools, the work itself is not so difficult, but since you have to remove the case cover, oil will come out and if you don't remove it well, the gasket will break.
View detail
Fits: YAMAHA YZ125, YAMAHA WR250F, YAMAHA TZR250R, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA SY250F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA XT250X, YAMAHA tricker, YAMAHA SEROW250, YAMAHA SRX400, YAMAHA SRX600, YAMAHA TT250R, YAMAHA YZ125X
Good vibes
Even for a beginner, it's easy to put on, looks good quality, and I'm looking forward to driving it! View detail
Fits: YAMAHA TW200, YAMAHA TW225, YAMAHA SEROW225
Clutch's connection is much better now.
Used for SEROW225 WE.
No more Judder when the Clutch is connected, and the connection is better, so it is easier to Front up.
Large Satisfied!
View detail
Fits: YAMAHA TW200, YAMAHA TW225, YAMAHA SEROW225
It's not like a TRIAL car.
I did this today along with the Clutch replacement myself.
The work itself is not so difficult.
I was expecting something similar to the Fee Ring on the TRIAL car, so to be honest I was disappointed.
It's only a test run, so it may show its true value in the future.
My impression for now is, well, SEROWMotorcycleSEROW.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA YZ450F, YAMAHA RZ350R, YAMAHA SR400, YAMAHA SR500, YAMAHA WR450F, YAMAHA XTZ-750XTZ750 SUPERTENERE, YAMAHA YZ250, YAMAHA YZ250X
It's a spastic cut and the lightness is adjustable.
[How is it used?
I am playing with Enduro on YZ250, and I am not good at speed type, so I often play hard type.
In addition, I was worried about it because I often run Narita, Katsunuma, Whiteui and other courses that require clutch work in practice.
I've never baked Clutch work before and I'm not bad at it, but I'm just not good at Front up, so I bought this one.
Was the one you received as per Image?
As per Image, I increased the number of Washer 12 to 18 which can adjust the Clutch pre-road.
Was the installation difficult?
I replaced it while it was on the MotorcycleLift because my back was hurting, but I think it would be easier to install it in a sideways position.
It is Washer for pre-road adjustment of Clutch Spring, but I was told by Mr. Kitamura that 3 pieces are good for YZ250 and 2 pieces are good for YZ250X. Because my YZ250 uses the Clutch Spring of YZ250X, I made two pieces.
How was your experience with it?
I installed it before the race and ran it on the track, but it was so different that I was confused.
MeatPoint and the way we connect has changed.
I'm sorry for the onomatopoeia, but it's like a quick snap and a quick connection…lol
[Included Parts:were they on?
Sticker comes with it. The cat is cute.
[Was there anything that disappointed you?
None!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
You shouldn't do it right before the Race because the Fee Ring changes too much. Do it before going to practice lol.
Also, when I installed it, I loosened the bolt half a turn from tightening and grabbed the Clutch lever a few times to center it and then tightened it. It's just my feeling.
View detail
Fits: YAMAHA YZ125, YAMAHA WR250F, YAMAHA TZR250R, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA SY250F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA XT250X, YAMAHA tricker, YAMAHA SEROW250, YAMAHA SRX400, YAMAHA SRX600, YAMAHA TT250R, YAMAHA YZ125X
This is good!
I wanted to make it easier to do front ups like going over logs on the SEROW. "Spud. and so on And now it's even easier to grab the half-craze! (^-^) / View detail
Fits: YAMAHA YZ125, YAMAHA WR250F, YAMAHA TZR250R, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA SY250F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA XT250X, YAMAHA tricker, YAMAHA SEROW250, YAMAHA SRX400, YAMAHA SRX600, YAMAHA TT250R, YAMAHA YZ125X
Adjust Touch on Clutch
Installed on SEROW250
You can adjust the lightness of the Clutch by the number of Washer attached.
I assembled it with one Washer.
It makes it easier to understand the Clutch connection.
It's not so severe that you feel any problems in city driving.
There may be no particular benefit when driving on road.
When driving off-road, you can feel the difference in the clutch and throttle operation.
There are no negative elements, so if you're running off-road, this is a good choice.
View detail
Fits: YAMAHA YZ125, YAMAHA WR250F, YAMAHA TZR250R, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA SY250F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA XT250X, YAMAHA tricker, YAMAHA SEROW250, YAMAHA SRX400, YAMAHA SRX600, YAMAHA TT250R, YAMAHA YZ125X
To be honest, I'm not sure how it works.
I bought it if I can improve Clutch touch and adjust the weight in the product description at this price.
When you install the collar on the Bolt, the rattle will be gone and the fee ring will be better, but in reality, the effect is only a feeling in street driving. I think that the feeling depends on the person.
View detail
Fits: YAMAHA YZ125, YAMAHA WR250F, YAMAHA TZR250R, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA SY250F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA XT250X, YAMAHA tricker, YAMAHA SEROW250, YAMAHA SRX400, YAMAHA SRX600, YAMAHA TT250R, YAMAHA YZ125X
5
I installed it on my XG250 TRICKER250 and it was so good that I bought a Clutch Retainer for my wr250f as well.
The Clutch connection is far better than the OEM. Currently, WasherQuantity:The weight of the Clutch is about the same as in NORMAL with 1pc. more, but it can be operated with 1pc. of index finger.
View detail