Reviews
Not a bad product.
A little difficult to handle due to its low position. View detail
I would also like to see the foundation for Right Side *.
The screws holes for the SIDE vernier mounting bracket on the GSX-8R Tandem Footpeg Reverse side are used for SMART mounting.
As others have mistakenly said, Install the foundation with the smooth side on the outside (the one with the loci on the inside)." The first one with Logo is installed on the outside, and the second one with Logo is installed on the inside. Holder upside down?" I panicked.
View detail
Slightly difficult to install, but functions well
Helmet holder for retrofit type.
Demerit is that it doesn't come with a key from the beginning like Kawasaki does these days...
It is 100 times better than hooking up to a Tandem seat.
Functionality is adequate.
There is a slight problem with the installation, because the Bolt that holds the Plate is close to the body of the car,
In a normal hexagonal Wrench, Quantity:Only 1 pc out of 2 pcs could be tightened.
I think it can be tightened by Offset wrench etc. because there was a gap of about 20mm when I temporarily tightened it by hand.
Also of note, this Helmet holder uses the Bolt hole on the back of the Tandem Footpeg.
Since these are probably bolt holes for installation of OEM SoftSide case brackets, it is necessary to confirm whether they can be used together or not.
View detail
Helmet lock
I had been thinking about installing the Helmet Lock Holder, but finally decided to go with METALGEAR, View detail
My mistake.
I had posted before that it could not be installed without modification, but this is because I installed the bracket backwards and forwards, so there is no problem at all except that it is difficult to attach the mounting screws. It is a good product. View detail
Processing required
The guide on the body side of the mounting bracket was not attached as it was because the body attachment part of the mounting bracket and the guide on the body side were in contact with each other. The screw fastener of the mounting bracket also interfered with the box part of the air filter when the length of the wrench was too long, so I wondered whether I should cut the wrench or not, but I loosened the box side and shifted it to close. View detail
Good feeling on Design
I was feeling uncomfortable with the lock on the SIDE of the helmet, so I bought it because I thought it was an ideal place to lock the helmet. The lock looks great on the helmet, but since I have a box on my V-SX Cali, I can't hang it on the DRing because there is not enough space to operate it, so I hang it on the band. View detail
Fit as per Image
I had avoided helmet locks on the SIDE because of the possibility of scratches on the part where the motorcycle and helmet come in contact with each other or with the adjacent parking lot.
This is an excellent form of locking on top of the Seat or Carrier, as it is somewhat less likely to get wet inside in the event of sudden rain, and it does not fall off, eliminating the above concerns.
The key position is fixed on the Left Side, so it would have been better if I could have chosen both. The key position is fixed on the Left Side, so there is a possibility that it interferes with the Income mounting position.
View detail
The only conforming product
It can be installed safely, and it is sent in such a way that it can be attached without Instruction Manual, and I wonder if it is conscientious. (´-) View detail
Well! Is this what it looks like?
Installation is relatively easy and good, but it would be better if the base plate were the same color as the body, since it is made of SUS material and is a different color from the body. It would be better if the base plate was the same color as the body. View detail
Fits: SUZUKI Gixxer SF 250, SUZUKI Gixxer SF 250, SUZUKI Gixxer 250, SUZUKI Gixxer 250
Great stability when Helmet is placed.
Installed on a Gixxer 150, BoltQuantity by Grab Bar:The bolt on the grab bar can be removed with a 12mm box wrench.
With the common helmet lock that is attached to the Tandem Footpeg, I was concerned about the helmet cap interfering with the footpeg and swing arm area, but this one can be placed stably on the Seat, so there is no need to worry about that.
The texture of Stainless Steel is also good.
View detail