Reviews
I honestly can't tell the difference than Front.
Axle is beautiful, although I can't experience it better than Front.
There is a sense of custom.
View detail
more than I thought
I had installed a Chromoly shaft of another brand on another motorcycle before, so I decided to use Vito's shaft this time. (NORMAL would be enough to get in) The rigidity of the shaft is incomparable to that of the NORMAL. View detail
Fits: KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z1100R, KAWASAKI Z1100GP
I'm happy with the STAND and the workmanship
It's in use on the KZ1000J
I needed a hollow rear axle to use the maintenance stand, so I bought it and used it to make the maintenance stand I did
I am satisfied with the Large because my original goal has been realized and the product itself is very good
View detail
Fits: SUZUKI gsx1100s katana (sword)
I feel satisfied
It's quite noticeable as well as visibly satisfying
The sagging sensation at the corner might be gone. I think it is more stable than before and it bends straight
This may be a slow corner speed ride, so it may be the Brush-bo effect (*・ω・) (*-ω-) (*・ω・) (*-ω-)
The price is less expensive than other Shop stuff, so I'm happy with the cost effectiveness
Replacement is as simple as pulling the OEM and plugging it in, no swing arm escapes It is necessary to hold it down as you would like, but it won't be a problem because the correction will work even if it is off
Naturally, you need to float the rear wheels in the STAND and the Tire's floating Tire to prevent the Tire from escaping If you insert a piece of board underneath, it will be harder to escape
You will have the opportunity to perform a GreaseUp on the pivot bearing during the work process Be careful not to guillotine your finger
Because the thickness of Plating is not known, Rust and Hardness are not known to Silicon You might want to do sprayMaintenance when you notice it
Unicorn says that the Shaft should be inserted from the Left, looking backwards, so that the rainwater can get in There is, but they say it's better to change the direction of stabbing from Right to Stab
The Frame is not flat because of weld distortion I painted Packing
View detail
It's tighter
Used in GPZ900R
It is installed at the time of spec. change around the rear suspension
I got a great effect when I changed Front's Axle to Chromoly Change Pivot
The effect is more obvious on the Front, but we'll assume it's Snap around the Rear as well
Full Pannier + Tandem and I am no longer worried at all
View detail
Although it is not essential, it is preferable to exchange it with Set
I bought it at the same time as Axle Shaft exchange.
It looks nice and it gains strength (?) Parts I would like to purchase from Set.
This does not raise the performance. Only looks!
View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100
Front is perfect
【What made you decide the purchase】
I decided to try the hollow Chromoly axle with a good reputation, because I wanted to strengthen the front of the Front according to the exchange of Fork Spring.
【How was it actually used?】
I feel that the trackability of the rough road surface and the movement of the Front suspension are getting better. Moreover, it seems that the incision and reaction at SelfStir became Linear.
【Was it difficult to install? (Hard parts case)】
Both SidesNut has become, so it was relatively easy to exchange by working to extrude the conventional Axle.
【Please tell me the point of installation and hang (in the case of Hard parts)】
First of all, 17 mm Hex bit is Quantity : Pair (for Left and Right) It is necessary for minutes. Tighten Torque 5. 0 kgf-m (NORMAL is 9. 0kgf-m). It is Aluminum Nut so you need to be careful not to tighten too much. There is a notice to the effect that Grease is applied to the Tap part.
There was no work problem in Wheel's centering out.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
[Is there anything I was disappointed about?]
Nut is Material : What was Aluminum. Rigidity, there is anxiety about handling when detaching.
【Hope for Manufacturer - Please let me know if you have any improvement points]
It is saved when detailed Instruction Manual of exchange method and notes is attached. I think that it would be good if you can select iron made Nut.
【Have you compared items?】
Nothing in particular.
[Others]
NORMALAxle (Including Nut) 543 g, this product was 363 g (180 g weight reduction).
View detail