Reviews
Fits: HONDA CB400SS, HONDA FTR223, HONDA FTR223, HONDA NC700S, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI BALIUS, KAWASAKI BALIUS2, SUZUKI RV200 VANVAN, SUZUKI ST250, SUZUKI ST250 E Type, SUZUKI GSX400
Mounted on SR400
I got confirmation from the Motorcycle shop that it will pass inspection as is if installed horizontally! I have a little bit of pain in my shoulder, though. View detail
Fits: YAMAHA XJR400R, HONDA MONKEY, HONDA HORNET250, HONDA APE 50, HONDA APE 50, KAWASAKI ZRX400II, KAWASAKI ESTRELLARSCustom, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX400, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI W800, KAWASAKI W400, HONDA MONKEY, KAWASAKI 250TR, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA TW200E, YAMAHA TW225E
Quality is fine
I use it on my GIXXER250. 20mm up on the riser to adjust the height, and the Riding Position is much easier. Drilling is necessary but not difficult. View detail
Slight improvement
There are several types of handlebars available to improve the Riding position of the Bolt, which is slightly far from the grip, but we chose this handlebar because it does not require the Brake hose to be replaced, even on a car with ABS.
Since the hose and cable do not need to be replaced and the switch holes have already been machined, the handlebar replacement is very simple. It took me some time to transfer the various items that were attached to the handlebar, but if you are a person who can do the job well, you can probably complete it in about an hour. I was a little surprised that the price tag or product seal was attached to the Right Grip, but I guess it is unavoidable because the Left Grip gets in the way when you push the Grip in. If possible, I would like to see a seal that can be easily removed, but since it does no real harm, I guess it's OK.
I did not change the Clutch Cable routing, but I guess it is necessary to change the routing because the Cable rubs against the Top Bridge when the Handlebar is turned all the way to the Left. I will redo only the Clutch Cable in the near future.
Riding position, which is the most important, has definitely improved, albeit subtly. It is not an ideal change, but considering that the improvement is within the range that does not require replacement of hose and cable, I think this is the limit of the improvement.
The photo shows before and after Handlebar replacement.:Pair (for Left and Right) The following is a comparison of the location of the Tank cap and Logo with the midpoint of the Grip end of the I was not able to take pictures from the exact same position, so this is just for reference.
View detail
Fits: HONDA CB400SS, HONDA FTR223, HONDA FTR223, HONDA NC700S, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI BALIUS, KAWASAKI BALIUS2, SUZUKI RV200 VANVAN, SUZUKI ST250, SUZUKI ST250 E Type, SUZUKI GSX400
Connection to Tommaselli
Timing was not available for Tommaselli, so I bought it in time
The looks and Position are great, but … it won't pass inspection. w
View detail
Fits: HONDA CB1100, HONDA CB1300SUPER BOLDOR, HONDA CB400SS, HONDA FTR223, HONDA FTR223, HONDA NC700X, KAWASAKI 250TR, KAWASAKI W400, SUZUKI RV200 VANVAN, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, Others , YAMAHA TW200, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW225E
good product
it's product excellent. my motorcycle is mor beautiful and more complete. fast shipping. but little bit expensive. thank you. View detail
Fits: HONDA CB1100, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB750, HONDA FTR223, HONDA FTR223, HONDA NC700X, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100 RS, KAWASAKI BALIUS2, SUZUKI RV200 VANVAN
45°C is considerably squeezed.
It was not suitable for me, although it is a part that cannot be helped because it is something that cannot be understood until it is put on.
The atmosphere is that of a family car.
I thought it was too narrow for me.
Also, if you do not extend both the Throttle Cable and Clutch Cable on the vtr250, the Cable will stick out when the handlebar is fully locked and the RPM will increase.
View detail
Fits: HONDA FTR223, Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, HONDA MONKEY
To eliminate tendonitis
[How is it used?
In Replace from VANVAN200 OEM. For elbow angle and other improvement purposes due to tendonitis. I tried European2 type before this, but it was too narrow and not high enough for me. I tried the European2 before, but it was too narrow and not high enough for me.
Was the one you received as per Image?
Chrome plating is clean and as expected.
Was the installation difficult?
Accuracy is good, no particular problems.
How was your experience with it?
VANVAN, but personally, I think it is important to have an Adventure type? w maneuverability and to be able to swing it around from the Front to some extent, but if it is too wide, it will be Minus in terms of tendonitis measures. So the best balance between the two was this for me:Handlebar width 740mm. The handlebar width is 740mm, and the handlebar height is 700mm, which is a difference of 20mm on the One Side.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I thought it was too "Up" in terms of image and looked tacky, but I thought it was fine for VANVAN. If you are looking for practicality, I think it is the best.
As I mentioned in my review of another Handlebar Brace, I was having trouble finding the correct width for the HURRICANE Handlebar Brace that I installed at the same time. Since they are from the same manufacturer, it would be great if you could just list the typical brands that are compatible with the HURRICANE Handlebar Brace.
View detail
Fits: HONDA CB1100, HONDA CB1300SUPER BOLDOR, HONDA FTR223, HONDA NC700X, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, SUZUKI RV200 VANVAN, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, Others , YAMAHA TW200, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW225E
It's easy to drive around town as well as Touring.
Changed by adjusting Riding position
It depends on your preference, but I am much more comfortable and can handle Touring and city driving at all.
The OEM width and height are well within the vehicle inspection limit, although it is quite up.
According to the instruction manual, Wiring and wires can also be used for OEM applications.
(I don't know, mine is an extension from a previous Kit.)
Mine is a Quarter3 model, but the aperture angle and other factors vary from model to model, so please be sure to check the angle of the aperture.
However, there are no holes for the Switch box pouch, so drilling is required.
That's the only drawback.
View detail
Fits: HONDA CB1100, HONDA CB1300SUPER BOLDOR, HONDA FTR223, HONDA NC700X, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, SUZUKI RV200 VANVAN, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, YAMAHA TW200, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW225E
When a 168cm man becomes …
Handlebar width is just right.
OEMs had a wide range, and the Image of off-road motorcycle remained strong.
This HURRICANE POLICE 3 model is black in color and has an easy to ride position, and I think it is suitable for a woman of about 164cm.
For me, it was the best and fastest Mothers' bicycle sensation.
As you can see, the Style is a perfect on road motorcycle, and I am satisfied with the Large change.
View detail
Condor Handle
[How is it used?
Good
Was the one you received as per Image?
Street Image
How was your experience with it?
The system is a little tight.
[Points to note]
nothing special
How did it compare to other products?
nothing special
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Great Quaility product
Finally installed it on my z125! It changed my bodyposition and gave me more room when tucked in. Excellent product with great workmanship. View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB400SS, HONDA CB400SF, HONDA CB750, HONDA FTR223, HONDA FTR223, HONDA NC700S, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA HORNET250, HONDA MONKEY, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W800, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
Excellent appearance & operability
[How is it used?
I changed XJR400R from OEM Handlebar to this Condor Handle.
Was the one you received as per Image?
The precision of the construction is good and the shape is cool.
Was the installation difficult?
It was the first time for me to replace the handlebar, so I had to remove and install the switch, fine-tune the angle of the handlebar, etc. The drilling of the holes for the switch box was done by a nearby motorcycle shop.
How was your experience with it?
With the OEM Handlebar, it seemed a little far away, but now that the Throttleetc. is in front of it, it is much easier to ride.
Curve also feels easier to turn.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Point or hang of installation:Anyway, it is to do fine-tuning repeatedly.
If you add a Switch box, you should fine-tune it, if you add an AxelSlot, you should fine-tune it, and repeat until you are satisfied.
View detail
Fits: YAMAHA XJR400R, KAWASAKI 250TR, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, KAWASAKI ESTRELLARSCustom, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB750, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI W800, HONDA APE 50
They fit
Not a lot you can say about handlebars. They look good and seem to be of a high quality, time will tell. However there are a few points worth mentioning. There is a manufacturers sticker where the grip goes, and not making it an easy to remove sticker meant I took about 20 minutes soaking and rubbing the area to remove it. Also the standard bars have a location hole for the left and right switch cluster to stop them rotating. These bars do not so you either drill a hole and hope to get it in the correct position, or remove the locating pin from the switch cluster. View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB400SS, HONDA CB400SF, HONDA CB750, HONDA FTR223, HONDA FTR223, HONDA NC700S, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA HORNET250, HONDA MONKEY, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W800, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
Thoughts.
Separate Handlebars were out of stock, so I put the Condor Handle on backwards and tilted it forward. It is very forward leaning and narrow, so I think it will be strange to use Large until I get used to it.
If you are going to reverse mount it, CondorSW looks better without interference to Tank. The product itself is very good, so it depends on how you attach it.
I only reverse-mounted it, so just for reference, Accelerator Wire and OthersWire can be used as they are. However, I think it would be better to change the wires if possible, since they seem to be in pain. The same can be said for any handlebar replacement, but I think a drill is necessary because it is necessary to drill holes to fix switches.
View detail
Fits: YAMAHA XJR400R, KAWASAKI 250TR, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, KAWASAKI ESTRELLARSCustom, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB750, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI W800, HONDA APE 50
Easy to use
I replaced Handlebar to immeChain.
The height of the handlebar is now much lower.
It's so much easier to ride.
View detail
Fits: SUZUKI GRASS TRACKER, KAWASAKI W400, SUZUKI RV200 VANVAN, KAWASAKI 250TR, HONDA MONKEY, HONDA NC700X, HONDA FTR223, HONDA CB1300SUPER BOLDOR, HONDA CB1100, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200, Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER
Handling by POLICE Type 3
Even without the OEM Handlebar Bracket, the HURRICANEPOLICE3 is just the right height and squeezes inward to achieve the optimum position for a natural posture. I like it for myself. View detail
Fits: YAMAHA MT-09, YAMAHA XSR700, YAMAHA XSR900
Lean forward.
I installed it on my Trident 660.
This is a special product for MT-09, but it can be installed without any problem.
You will need to drill holes in the Switch Box.
For the Clutch SideGrip, drill a hole on the opposite side of the original hole and fix the grip.
It's fun when you're doing sports driving because you can lean forward a little.
I don't like to stay up too much, so it was just right.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR400R, YAMAHA XJR1300, YAMAHA TW225E, HONDA CB400SF, HONDA CB400SF, HONDA CB400SS, SUZUKI ST250 E Type, YAMAHA TW200E, YAMAHA TW200E, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI GSX400, YAMAHA TW200, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, Others
Just as I imagined, with a lower Handle position!
I put it on my st250, but the OEM handlebar made me look awkward when riding.
The quality is not luxurious, but it feels solid!
View detail
Fits: SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI GSX400, SUZUKI ST250 E Type, SUZUKI ST250, SUZUKI RV200 VANVAN, SUZUKI GSR400, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ESTRELLARSCustom, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100
Replacement from Plating.
This is a change from Plating of the same type.
On the LeftGrip side, there is a paper seal with the product number, ManufacturerMain and product name, which is still difficult to remove.
If you could make it easier to peel off, I'd appreciate it.
Also, when I peeled off the seal, I found a hole in it. I don't understand why there is a hole in it.
Also, I'd appreciate it if HURRICANE would do an OrderHandlebar or something!
View detail
Fits: HONDA glom, HONDA glom
Used on a Monkey 125. It leans forward quite a bit!
Installed on a Monkey 125, which leans forward a lot compared to the OEM.
The mounting holes are open for easy replacement, and the wires are large and sturdy as OEM, although there is some excess.
View detail