Reviews
HURRICANE LongThrottle Wire GPZ900R
I received the product immediately after purchase and am very satisfied with it.
I'm sorry
View detail
sending a car to look at something
I don't know about the use of the W because it is still shipping to see it after 5 months. View detail
It is easy to install.
It is easy to install., Wire, Hose, etc. were Large sturdy with STD Size! View detail
Fits: KAWASAKI ESTRELLARSCustom, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI W400, HONDA MONKEY, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA NC700X, HONDA FTR223, HONDA FTR223, HONDA CB750, HONDA CB400SS, HONDA CB1300SUPER BOLDOR, HONDA MONKEY, KAWASAKI BALIUS2, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, HONDA CB1100
It's exactly what I expected.
I bought a used CB400SS with a Swallow-type handlebar, so I replaced it with this one.
Back pain sufferers have a hard time leaning forward.
View detail
Fits: Others , KAWASAKI W400, KAWASAKI 250TR, HONDA FTR223
Retro Style
Used several times on other motorcycles with my favorite Handlebar to customize it to a Retro style.
The ST250 is used this time, and it needs to be modified to fit the car model since it does not have holes.
View detail
Separate handle by all means!
If Separate handle is selected, the NORMAL clutch wire will be too much.
What kind of harm will be done?
The Clutch is not turned off, but it is turned off, or at worst, it gets tangled in the Wheel and becomes Large.
Shorting is necessary to prevent these problems.
It is -100mm shorter than NORMAL.
good point
When separate handle is used, the clutch is cut smoothly.
XX semi-cra is also easy.
There is also the rigidity of the ○Cable.
The price is also low.
A bad point
Installation is troublesome.
○Peasy to rust if lubrication is neglected.
I need a Cable that matches the length of the Handlebar.
For Separate handle, Normal cable should not be done in the sense of prevention.
View detail
Fits: HONDA CB750F, HONDA CBX400F, HONDA CBX550 F/INTEGRA
No problem if not OEM
The Tachometer needle started to dance, so I wanted to replace the Cable just in case before the MeterOH.
I was going to go with OEM Product, but chose here with Point.
The actual installation was no different than the OEM product and there were no problems with operation, etc.
View detail
Fits: Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, HONDA MONKEY
TW200 with HURRICANE Narrow4 type
None of the stores carry the HURRICANE Narrow4 model,
There were few installation Images on the Internet, and I bought one or two without seeing the actual product.
I originally used DAYTONA's Dart Rubber (width 80cmOver), so the width of 68.5cm felt very narrow, but I got used to it within a week, and the Position is easier to ride than with the Dart Rubber.
The result was a good purchase.
It looks a bit Mischief, but when you ride it, it doesn't feel that way at all.
I hope the installation photos will be helpful to someone.
View detail
Mood changes.
[How is it used?
It was put on the Meter of a YAMAHA TZr50R under Restore.
Was the one you received as per Image?
When I first saw it, I thought it was the real 120km. However, upon closer inspection, I realized that it was a Seal.
I think it is good because it is not immediately obvious to a stranger.
Was the installation difficult?
I think it is easy if you degrease it well and do not shift it.
How was your experience with it?
It would be useful to have a 50cc 2st that swings through the meter.
[Included Parts:were they on?
None in particular
View detail
Fits: HONDA NC750X, HONDA NC750X, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI ST250, SUZUKI ST250 E type, SUZUKI volty, YAMAHA XJR1300, YAMAHA MT03, HONDA CB500X, YAMAHA BRONCO, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW225, YAMAHA XJR1200, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200, YAMAHA TW200
It's fine.
The front end has been eliminated and driving has become easier. View detail
Used to install external grips on af09.
[How is it used?
Used to install external grips on af09.
Was the one you received as per Image?
Yes.
Was the installation difficult?
Easy
How was your experience with it?
Made by HURRICANE for safety and security.
It looks Simple and cool.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Used to attach external grips to af09.
[How is it used?
Used to attach external grips to af09.
Was the one you received as per Image?
Yes.
Was the installation difficult?
It is easy even for beginners as all you have to do is put it in the handlebar and turn the hexagon.
How was your experience with it?
Made by HURRICANE for safety and security, Simple and cool.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Good to be able to replace the hose without changing it.
Although the Handlebar is just a little bit closer to the front, I can feel quite a difference!
It is easy to replace the hose cable without changing it! All you have to do is to be careful not to damage the nut when removing and installing the bolt.
It looks better and is better positioned!
View detail
Fits: HONDA PCX125HYBRID, HONDA PCX125HYBRID e:HEV, HONDA PCX125, HONDA PCX150, HONDA PCX160
It is an excellent product as expected.
I bought it after a lot of research. I installed it on a PCX125, but I was a little nervous because I did not know that the bar end could not be used as standard. (Sweat) The position can be raised a little to make it look like a modest onyx w, or lowered to make it look like a low-down position, so it can be enjoyed for a long time. ^ ^ View detail
Fits: YAMAHA SRV250, YAMAHA SR400, YAMAHA FZR400, SUZUKI GSF1200, KAWASAKI ZR-7/S, HONDA Monkey BAJA, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA V-MAX 1200, HONDA MONKEY, HONDA MAGNA50, HONDA DREAM50, HONDA JAZZ, HONDA GORILLA, HONDA APE 50, HONDA APE 100 TypeD, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR1300, YAMAHA XJR1200R
To Accent!
[Color] Clear coating is weak, and the anodized gilt peels off when tightened! View detail
I would have been fine with OEMFender...
When I went through the OEM Fender to get a belt to fix the Seat bag, I found that the OEM Fender was plastic (not weak, but it would flex), so I decided to use the Fender Eliminator Kit, which was also inexpensive.
Probably the most difficult part of the installation is the removal of the OEMFender.
Instruction Manual does not have instructions for removing OEMFender.
However, if you are a do-it-yourselfer, you can remove the Rear Fender when you insert the ETCCard, so you may not have to do so much work (^^;)
The construction itself is solid, so the seat bag can be securely fastened to the belt.
I feel like it could be a little more behind the License Plate, but I am satisfied with the strength of the product.
View detail
Fits: Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, HONDA MONKEY
Super Cub custom changed to Bar handleSpec.
The handlebar height and narrowing were just right, and I thought it would reduce fatigue during long tours, so it was the right choice. View detail
Fits: Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, HONDA MONKEY
It fit well without cable extension. exorcism
Delivery is fast and packaging is always perfect.
It was installed on cb1100ex. It can be installed without cable extension and the position has been improved.
It has risen slightly, but my waist has become more comfortable and the design has become prettier.
I am so satisfied. thank you -------------------------------------------------- -------- Delivery is fast and the packaging is always perfect. It is mounted on the CB1100EX. It can be installed in pure without extending the cable and the position is improved. I climbed a little bit, my waist was comfortable and the design was pretty. I'm so satisfied. thank you Powered by Google Translator
View detail
Fits: SUZUKI GSF1200, KAWASAKI ZR-7/S, HONDA Monkey BAJA, YAMAHA FZR400, YAMAHA SR400, YAMAHA SRV250, YAMAHA V-MAX 1200, YAMAHA XJR400, YAMAHA XJR400R, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX400, YAMAHA XJR1200R, YAMAHA XJR1300, YAMAHA XJR400, YAMAHA FZ400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT250, SUZUKI GSX400
I replaced it while changing the entire front set!
[How is it used?
Since the entire front set was used from another company, the Top Bridge was also changed and the Stem Nut was also replaced with an aluminum one.
Was the one you received as per Image?
Quality was as good as the Image.
Was the installation difficult?
Easy to install, but Material:For Aluminum, we tightened it carefully to avoid damaging it.
How was your experience with it?
The functional aspect remains exactly the same, but the dress-up effect is outstanding.
It has been a pleasure to run.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
It is ▼Anodized, so the color is likely to fade in the sun, but it is holding up well even if it is exposed to some direct sunlight.
View detail
Fits: HONDA CB1100, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA FTR223, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI ZrX1200ZrX1200 DAEG, SUZUKI RV200 VANVAN, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, Others , YAMAHA TW200, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW225E
Favorite Handlebar
I think this handlebar fits well with TRACKER and Boha Style Custom.
I had purchased the Plating type in the past, but this time I bought the Black one in stock.
View detail