Reviews
Fits: BMW HP4, BMW S1000R, BMW S1000RR
Appeal full score
Installation is very easy. No modification, no drilling, nothing at all. 3Pattern Stop-lamp and 3Pattern Blinker are available for your enjoyment. The instruction manual was not included, but it is clearly explained in the video, so I had no trouble. I am satisfied with my purchase of Large. It is cool. View detail
Fits: HONDA CBR600RR
The Rear area is even more Refreshing!
[How is it used?
Purchased for CBR600RR PC40 mid-term.
I had always wanted a LED Sequential Blinker with built-in Tail lamp, and I bought it because it was cheaper.
Lens thought it would fit since the car body is Black. [Color] I chose Smoke.
Was the one you received as per Image?
The box was so small that I wondered if it was really this one. But when I opened the box, I found a Tail lamp with a meticulously constructed structure, which I thought was better than I had imagined.
[Color] The Smoke feel is just as I expected and Parenthesis is good.
Was the installation difficult?
It's super easy, just remove the OEM Product and install it in the reverse order! Some OEM Bolt and other parts are used, but I think you can tell just by feel.
Wiring is also exclusive, so it is Honda's Coupler and Bolt On.
TST's products have a Large body video explaining installation, so if you check it out and do it, I think you can do it very Smoothly.
How was your experience with it?
After installation, I checked the operation and it was functioning well.
I did not know about the Tail lamp, but when you hold the Lever, the Stop-lamp glows Polished like a high flasher. I think I could have done without it, but the brightness of the Stop-lamp is perfect and I think it conveys the message to the following cars.
And look [Color] Smoke is now more Parenthesis-like with the Black body.
The LED Blinker is a high flasher because I haven't changed the Relay yet, but I checked it and it seems to work well during the daytime. It is perfect at night.
I need LEDRelay and will buy it separately.
[Included Parts:were they on?
The resistance came with Included Parts:, a Type that interrupts Wiring.
I tried to use it for a while, but it did not work. I think it can be done if you understand it well enough.
[Was there anything that disappointed you?
Nothing in particular! I'm glad I bought this product.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Good
Hello everyone, here I recommend everyone to buy this product, it is a very good product, it looks cool and lighter, it is a product worth buying View detail
Taillight Set Results in a Sleek Looking Rear End on the Grom
About quality and texture: I am happy with the quality of the integrated LED taillight set from TST. The undertail panel is made from ABS plastic while the taillight is LED and intergrates the indicators into the brake light. About the feeling of use: Final result of the installation is a sleek looking rear end on the Grom and the LED taillight performance is superb but the integrated indicators may become a problem in the future when road worthy inspections are required. Products to buy together: An LED flasher relay would also be desirable to purchase alongside the integrated LED taillight set to simplify correction of the LED indicator flash rate. Difficulty of installation: The process to install takes about one and a half hours. Remove the seat, rear fairings, rear fender and taillight. Modify the OEM Honda undertail to allow for installation of the TST undertail panel. Relocate the tip sensor and install the TST taillight and wiring harness. Install the rear fairings and seat. Some what difficult to do. Cost performance and comparison with other products: Good costing as you are getting a outstanding designed and manufactured undertail panel and taillight with intergrated indicators but the price is high as compared to to just purchasing a taillight with intergrated indicators that will fit into the OEM Honda positioning. About shipping and packaging: Sea frieght was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: You do have to cut up the OEM Honda plastic undertail to install this Kit from TST so if you want to go back to the OEM Honda setup in the future you will need to purchase a replacement undertail. View detail
Fits: YAMAHA FZ-07, YAMAHA FZ-09, YAMAHA MT-07, YAMAHA MT-09, YAMAHA FZ8 10-15
Tst Mech Gtr
Overall product quality is ok. Satisfied with design and quality. Material of the product quite good. Bulb is looking nice and solid. Every part is solid and rigid..easily to install without any doubt. View detail
Superb service
I ordered the item on 5/3 and received it on 14/3. Since the item was not in stock at their warehouse, it took around 9 days for the item to arrive at my hand. For me, the service is quite faster for international delivery. View detail
Good quality and design
Good quality signals and easy to install. Honda wire connector also included makes the install super easy. Blinker relay for LED is required. Smoke lens but it is still bright. View detail
This taillight is really amazing
"Although there is no Z800's signature "Double Z" logo, it does not affect its attention to passers-by. There are multiple optional steering modes, and there will always be one that suits me. I chose the current popular lumen steering as Signal lights for daily street riding ------------------------------------------- --------------- Although there is no Z800 signature ""double z"" logo, but do not affect its attention to the passers-by, multiple optional steering modes, always have a suitable you, I chose the current popular fluent steering as everyday Street riding signal lights View detail
Used on Honda Grom
I thought I could pimp it out to a Grom, but I needed Conversion Harness.
I'm sure you can find it if you look for it at the same TST.
The replacement itself is easy, as you just remove and replace it.
View detail
Fits: KAWASAKI ZX6R, KAWASAKI ZX10R
Upgrading the look, and you can even choose how to light it up!
I chose the Smoked lens and it was the right choice.
The installation is not so difficult because it is Couplet-on, but it takes some time because you have to remove the Tail cowl and loosen the License Plate Bracket.
This product has a Stop-lamp function and a Blinker function that allows you to select several different ways to blink!
I did not use the Blinker function because my vehicle uses KIJIMA Nano Blinker for Fender Eliminator.
The flashing method is
Braking, first Electronic flash flashing & rarr; always on
Braking, leaving the electronic flash flashing
Braking, normal lighting
You can switch between them with the switch on the back of the TailBody.
I haven't checked how the Blinker blinks as I don't have it connected.
View detail
Fits: SUZUKI GSX-S1000, KAWASAKI KLX300, KAWASAKI KLX300SM, KAWASAKI Ninja 250R, KAWASAKI Ninja 300, KAWASAKI Ninja 400, KAWASAKI Z300, KAWASAKI Z400, KAWASAKI ZX6R, SUZUKI GSX-R1000, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000F, HONDA Grom
Flashing speed can be easily adjusted
I don't have the Instruction Manual, so I don't know the pin assignment, but the terminal on the long side is Battery and the short side is Blinker connection. remove the Cap and turn the semi-fixed resistor on the Print board to Right to decelerate and Left to accelerate.
KITACO Connector set (item number) ： (0900-755-02080) and Suspension for Honda OEM Relay (38306-KK4-000) will fit.
View detail
no problem
I bought this with Conversion Harness3-2.
Installation is easy, just remove the Headlight, remove the OEM Blinker, and attach the Conversion Harness to the TST Blinker and reassemble as before. At this time, it is recommended to install a Blinker relay that is compatible with the LED Blinker so you don't have to do anything annoying like attaching a resistor.
Also, if you buy this Blinker at other NetShop, it will be over 5000 yen, so it is better to buy it here.
View detail
Fits: KAWASAKI ZX-10R, KAWASAKI Z1000 (water-cooled), HONDA CBR600RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR1000RR, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA MT-09, YAMAHA MT-07, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI Z750 (water-cooled), HONDA RC51 All, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA FZ6R, YAMAHA MT-09, YAMAHA MT-07
crf250l
crf250l 2014 After installing the led winka, it was difficult to work, but I found this product. It worked very well with the led front and rear winka. I am very satisfied. Very easy to install. The blinking speed control function was also very good. Delivery was also accurate and fast! ---------------------------------------------- crf250l 2014 After the toys were not equipped led wingka not work, but found the product It works very well with the back of the front led wingka Very satisfied Very easy to mount Adjustable flashing speed function is very good Shipping also has accurate and fast! Powered by Google Translator View detail
Fits: KAWASAKI Z400, KAWASAKI Ninja400
The most beautiful and perfect ninja500 taillight!
This taillight is perfectly adapted to the Kawasaki ninja400, which is much better than the original taillight, and there are many lighting methods, the kind that can be programmed by computer, the lighting effect is full of texture, and the overall grade of the car has been improved. No need There is no need to break the board even if the line is broken, it can be used directly by plugging in, and it can be installed by looking at the manual! Good stuff, buy it! ---------------------------------------------- The taillights perfect fit Kawasaki ninja400, good-looking than the original tail lights and more, and a variety of lighting, it can be kind of computer programming, lighting effects full of texture, the overall grade cars have increased, no broken line does not need to break the board, direct plug can be used, with a straight line, read the instructions themselves can be installed! Good stuff, buy it! Powered by Google Translator View detail
Fits: KAWASAKI Ninja 400, KAWASAKI Z125, KAWASAKI Z900, KAWASAKI ZX6R, KAWASAKI Z400, KAWASAKI Z650, KAWASAKI Z800, KAWASAKI ZX10R
Easy installation
Installation is very easy.
Both the pattern and rate of the light emission can be easily adjusted.
It is a very self-satisfied part of MotorcycleParts.
View detail
5 star
happy with deal this item, after ship out very fast received .nice tail light LED Blinker Integrated Type Integrate Taillight look nice in zx6r and will purchase again. View detail
Stylish!
I was looking for a tail lamp and blinker in one piece, as I wanted to refreshing my butt area.
This item fit the criteria I was looking for and also looked pretty stylish and do-strike 750, so I bought it immediately.
I think it's an easy one to install.
It's a bit of a hassle because you have to remove the cowl system around the rear, but it's on Youtube "TST MT-09. If you search for the Japanese version, you can see a video of the installation.
Even if you don't know what I'm talking about, you can see the work being done.
And the biggest reason why I chose this one is that you can easily change the Stop-lamp and Blinker lighting Pattern.
Inside the Body (Inside of Seat.) You can change the lighting pattern by pushing the switch on the
You can see the lighting pattern in the YouTube video I mentioned earlier.
In my case, the Blinker was set to flow from inside to outside and the Stop-lamp was set to stay on from a few blinks from the moment I held it.
My friend says the blinker is a bit confusing in the daytime and the stop-lamp blinking is a bit depressing lol
But I like it because it's cool!
View detail
Fits: KAWASAKI ZX-10R, KAWASAKI Z1000 (water-cooled), HONDA CBR600RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR1000RR, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA MT-09, YAMAHA MT-07, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI Z750 (water-cooled), HONDA RC51 All, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA FZ6R, YAMAHA MT-09, YAMAHA MT-07
Compact and easy to install.
I didn't have a review, so I'm posting this for your reference.
I installed it on the MT-09 @ 2017 and the installation was completed with pomp and circumstance and no high flasher due to the BlinkerLED conversion.
Since it is compact, you can install it in a vehicle with almost no storage space without worrying about it.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA FZ-07, YAMAHA YZF-R3
Great product
Great product and highly recommended to friends and other motorcycle group. Costumer service support also very responsive regarding my queries. Fast delivery and will purchase again in the future..will install to my bike y15zr. The terminal of turn light is not compatible, only the tail light terminal only was compatible so i need to change the terminal but this is minor changes only overall superb. Thank you. View detail
I like it.
Is the front of the XSR900 retracted by the Small Type LED Blinker?
The Relay needs to be replaced
Be careful not to forget to turn it off because the Blinker will stop beeping I got used to it
The brightness is dazzling, so no problem
View detail