Reviews
Fits: BMW HP4, BMW S1000R, BMW S1000RR
Appeal full score
Installation is very easy. No modification, no drilling, nothing at all. 3Pattern Stop-lamp and 3Pattern Blinker are available for your enjoyment. The instruction manual was not included, but it is clearly explained in the video, so I had no trouble. I am satisfied with my purchase of Large. It is cool. View detail
Fits: HONDA CBR600RR
The Rear area is even more Refreshing!
[How is it used?
Purchased for CBR600RR PC40 mid-term.
I had always wanted a LED Sequential Blinker with built-in Tail lamp, and I bought it because it was cheaper.
Lens thought it would fit since the car body is Black. [Color] I chose Smoke.
Was the one you received as per Image?
The box was so small that I wondered if it was really this one. But when I opened the box, I found a Tail lamp with a meticulously constructed structure, which I thought was better than I had imagined.
[Color] The Smoke feel is just as I expected and Parenthesis is good.
Was the installation difficult?
It's super easy, just remove the OEM Product and install it in the reverse order! Some OEM Bolt and other parts are used, but I think you can tell just by feel.
Wiring is also exclusive, so it is Honda's Coupler and Bolt On.
TST's products have a Large body video explaining installation, so if you check it out and do it, I think you can do it very Smoothly.
How was your experience with it?
After installation, I checked the operation and it was functioning well.
I did not know about the Tail lamp, but when you hold the Lever, the Stop-lamp glows Polished like a high flasher. I think I could have done without it, but the brightness of the Stop-lamp is perfect and I think it conveys the message to the following cars.
And look [Color] Smoke is now more Parenthesis-like with the Black body.
The LED Blinker is a high flasher because I haven't changed the Relay yet, but I checked it and it seems to work well during the daytime. It is perfect at night.
I need LEDRelay and will buy it separately.
[Included Parts:were they on?
The resistance came with Included Parts:, a Type that interrupts Wiring.
I tried to use it for a while, but it did not work. I think it can be done if you understand it well enough.
[Was there anything that disappointed you?
Nothing in particular! I'm glad I bought this product.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
There is no Instruction Manual
I am very disappointed. I was worried about the price of the product, but I am not satisfied with the large change. View detail
Good
Hello everyone, here I recommend everyone to buy this product, it is a very good product, it looks cool and lighter, it is a product worth buying View detail
It can be easily put on anywhere!
[How is it used?
When I bought a new cbr600rr Fender, it did not have a License Plate Light, so I purchased this product which can be retrofitted.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It was easy, you can see the installation video on YouTubeChannel, so if you follow the instructions, you should be good to go.
I installed a conversion coupler for Honda, but the License Plate Light did not work, so I used the one that comes with the coupler and interrupts the wiring. The reason why it did not work was that the fuse was out. You can either modify the coupler or use the included coupler, both of which are easy to install.
It attaches to the back of the Number with Double-sided Tape, so it is very easy to put on. It is also strong enough.
How was your experience with it?
The LEDs are very bright and well lit, and the fact that they are compact and not very noticeable is great.
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Taillight Set Results in a Sleek Looking Rear End on the Grom
About quality and texture: I am happy with the quality of the integrated LED taillight set from TST. The undertail panel is made from ABS plastic while the taillight is LED and intergrates the indicators into the brake light. About the feeling of use: Final result of the installation is a sleek looking rear end on the Grom and the LED taillight performance is superb but the integrated indicators may become a problem in the future when road worthy inspections are required. Products to buy together: An LED flasher relay would also be desirable to purchase alongside the integrated LED taillight set to simplify correction of the LED indicator flash rate. Difficulty of installation: The process to install takes about one and a half hours. Remove the seat, rear fairings, rear fender and taillight. Modify the OEM Honda undertail to allow for installation of the TST undertail panel. Relocate the tip sensor and install the TST taillight and wiring harness. Install the rear fairings and seat. Some what difficult to do. Cost performance and comparison with other products: Good costing as you are getting a outstanding designed and manufactured undertail panel and taillight with intergrated indicators but the price is high as compared to to just purchasing a taillight with intergrated indicators that will fit into the OEM Honda positioning. About shipping and packaging: Sea frieght was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: You do have to cut up the OEM Honda plastic undertail to install this Kit from TST so if you want to go back to the OEM Honda setup in the future you will need to purchase a replacement undertail. View detail
It's not cosmetic, but I can recommend it to those who are obsessed with it.
I wanted to use a Fender Eliminator, but was looking for a product that would allow me to use an OEM inner fender for waterproofing near the battery box, etc., and came across this product.
But in the product information When installing the Japan License Plate, some modifications are required. As it is written, the mounting hole Pitch of Japan's License plate (120mm) The product did not conform to the
These and others are recommended for those who are comfortable with the additional processing of Inner fender's Cut and Bracket.
The car is legal and can be inspected without any problem.
・ "Daytona" Rear Blinker Bracket (For M8) _Item No.:23289
・ POSH." LED License lamp kit_Item number:500494
・ PLOT." Camera Bracket for Dora Recorder_Item No.:DRS001
・ "Daytona" High Cider Blinker PLOTn TWO_Item number:17308
The accuracy of cutting parts is good.
There is no problem with Fitting if the inner fender is processed according to the official YouTube video.
However, the license lamp and the Fender mentioned above interfere with each other, so we adjusted the mounting position by inserting the Spacer about 7mm. If I use the same TST license lamp, I am sure there will be no problem.
Although I had to buy a few more spacers and screws due to fitting with other parts, I was satisfied with the result.
View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR, HONDA CB1000R, HONDA CB650F
TST TST Brake Light modulator
Was the installation difficult?
Simply interrupt the Wiring of the Tail lamp.
How was your experience with it?
I think it will reduce the RISK of being rear-ended.
[Included Parts:were they on?
Instruction Manual and Sticker are included.
[Was there anything that disappointed you?
▼There are 3 patterns of luminescence.
1, Electronic flash alert
FLUSH several times during initial lighting and continue lighting as normal.
2, PulsarBrake Alert
Continuous FLUSH when BrakeLight is on 。 This is a feature that is Standard Equipment on today's luxury and high-grade vehicles, or Race vehicles (Endurance Race vehicles, driving in the rain, etc.).
3, IntermiTentPulsar
There is a momentary pause between PulsarFLUSH "Intermittent." FLUSHPattern of the
View detail
Fits: KAWASAKI Z900, KAWASAKI Z400, KAWASAKI Z650
Does not fit. Do not buy!
I bought this to replace the Blinker on my z650, but…
When I brought it to the Motorcycle shop, it took 5 seconds. We can't handle it because it would be an illegal modification." I was pushed back.
I explained the situation to Webike and the return process was Smooth, which helped, but … it's hard to buy Parts other than OEM Product.
View detail
That's $6,000 for this, which is crazy.
PeLePera too much hole enlargement Large necessary hassle! View detail
Fits: KAWASAKI ZX-10R, KAWASAKI Z1000 (water-cooled), HONDA CBR600RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR1000RR, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA MT-09, YAMAHA MT-07, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI Z750 (water-cooled), HONDA RC51 All, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA FZ6R, YAMAHA MT-09, YAMAHA MT-07
CBR1000RR '13 did not fit the reverse car
CBR1000RR '13 It didn 't fit the reverse car. shouldn 't the webike side write down the proper indications?
I think many of the Cases were not adapted for other Impressions.
View detail
Used for ninja250R
The blinker of the NINJA2 Helmet50R broke, so we diverted this one.
Cars with similar holes can usually be installed.
Unlike the OEM stick blinker, the Small is hard to see because of its poor angle.
I think the design is good and modern.
View detail
I wouldn't mind not having it.
I bought it because I didn't like the angle, but I would have preferred it to be a little shorter, and if you're using it at an angle you can drive on public roads, you don't need it at all. View detail
TST TeaST Reserver tank-lessKit
It was installed on a Yamaha MT-07 at the same time as the Fender Eliminator Kit.
I think the Reserve tankless is very effective in increasing the sense of reflection around the rear.
View detail
Fits: YAMAHA FZ-07, YAMAHA FZ-09, YAMAHA MT-07, YAMAHA MT-09, YAMAHA FZ8 10-15
Tst Mech Gtr
Overall product quality is ok. Satisfied with design and quality. Material of the product quite good. Bulb is looking nice and solid. Every part is solid and rigid..easily to install without any doubt. View detail
Superb service
I ordered the item on 5/3 and received it on 14/3. Since the item was not in stock at their warehouse, it took around 9 days for the item to arrive at my hand. For me, the service is quite faster for international delivery. View detail
Good quality and design
Good quality signals and easy to install. Honda wire connector also included makes the install super easy. Blinker relay for LED is required. Smoke lens but it is still bright. View detail
I love that it's got all kinds of designs in it!
I like TSTLarge.
All of my motorcycles are TSTTails.
View detail
Cosmic LED Flashing
I bought it because it is one of the cheaper LED blinkers and its shape is horizontal and not sequential.
It looks like a manufacturer in the United States, but there is an installation video on the official YouTube Channel, so I watched it and installed it and it went smoothly.
If you look closely at the finish, you can see some plastic molding marks and a little BALI.
I chose the Smoked lens, and I think it looks good without the Orange standing out.
View detail
This taillight is really amazing
"Although there is no Z800's signature "Double Z" logo, it does not affect its attention to passers-by. There are multiple optional steering modes, and there will always be one that suits me. I chose the current popular lumen steering as Signal lights for daily street riding ------------------------------------------- --------------- Although there is no Z800 signature ""double z"" logo, but do not affect its attention to the passers-by, multiple optional steering modes, always have a suitable you, I chose the current popular fluent steering as everyday Street riding signal lights View detail